Pašizgāzēja puspiekabe

CARNEHL Kippmulde Kipper SANH CHKS/AH Alumulde 23 m³

Carnehl Tipper SANH CHKS/AH
Aluminum half-shell rear tipping body 23 m³

Aluminum body,

Payload: 30,680 kg,

1st axle liftable,

Roll-up tarpaulin,

1x rear lower work light,

SAF axles,

Steel standing platform with safety grate, with guard rail and access,

Foldable underrun protection,

1x drop leg,

Drum brakes,

Air suspension,

Pivoting tailgate with 2 automatic locks,

Loading area dimensions LxWxH: 7,152 x 2,350 x 1,400 mm,

Sideboard heights all around approx.: 1,460 mm

Loading height: approx. 2,920 mm,

Fifth wheel height unloaded: 1,280 mm

External dimensions LxWxH: 8,900 x 2,550 mm

Wheelbase: 4,500 + 1,310 + 1,310 mm

Tires: 385/65R22.5 aluminum rims
Bsdpfx Aswcuk Asbzsww

Tread depth, right front tire: 10 mm

Tread depth, right center tire: 10 mm

Tread depth, right rear tire: 11 mm

Tread depth, left front tire: 3 mm

Tread depth, left center tire: 7 mm

Tread depth, left rear tire: 5 mm

SAF 9 t - INTRADRUM tri-axle unit (drum brake ET 0), wheelbase 1,310 mm, center of support 1,200 mm, track width 2,040 mm, with air suspension, S-cam brake
420x180 mm, 1st axle can be lifted, automatic slack adjuster 1x ABS on the center axle, FH 400 mm,

Proven welded construction using high-quality fine-grain steel grade DOMEX cold-formed steel, for 7350/7400 mm body length, lightweight design,
blasted and primed, chassis in reinforced design for half-shell body,
fifth wheel plate 8 mm continuous, kingpin 2", FH 400 mm,

Rear tipping body 23 cbm, 7350 mm x 1460 mm made of folded aluminum half-shells 6 mm
AlMg 4.5 Mn W28, specially tempered, welded with a continuous longitudinal seam, under the body floor, additional reinforcement of 8 mm in the dumping area, tapered towards the front, reinforced top flange on both sides, straight front wall in 5 mm
AlMg 4.5 Mn W28, with integrated dump

Rear wall 1460 mm internal, 5 mm aluminum welded construction, swinging,
slightly angled, flush with the top edge of the body, with
automatic 2-hook central locking,

Plastic half-shell fender with mud flap on the rear axle,
Chassis on the chassis with broom and shovel holder,
Right access,
Steps on the inside of the bulkhead,
2 wheel chocks with brackets,

Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.