Kravas automašīna ar furgonu un celtniFuso
3S15 Alu Pritsche 2.80m Ladekran Funk! sofort verfügbar!
Kravas automašīna ar furgonu un celtni
Fuso
3S15 Alu Pritsche 2.80m Ladekran Funk! sofort verfügbar!
fiksēta cena bez PVN
65 900 €
(78 421 € bruto)
Stāvoklis
Jauns
Atrašanās vieta
Bad Salzuflen 

Rādīt attēlus
Rādīt karti
Pamatdati
Cena un atrašanās vieta
fiksēta cena bez PVN
65 900 €
(78 421 € bruto)
- Pārdevēja atrašanās vieta:
- Meerbrede 9, 32107 Bad Salzuflen, Vācija

Zvanīt
Tehniskā informācija
- Nobraukums:
- 21 km
- Jauda:
- 110 kW (149,56 zs)
- Degvielas veids:
- dīzeļdegviela
- Tukšais svars:
- 2 850 kg
- Maksimālā kravnesība:
- 650 kg
- Kopējais svars:
- 3 500 kg
- Asu konfigurācija:
- 4x2
- Degviela:
- dīzeļdegviela
- Krāsa:
- balts
- Vadītāja kabīne:
- dienas kabīne
- Pārnesuma veids:
- mehānisks
- Emisijas klase:
- Euro 6
- Piekares sistēma:
- cits
- Sēdvietu skaits:
- 3
- Krautuves garums:
- 2 720 mm
- Iekraušanas vietas platums:
- 1 900 mm
- Iekraušanas telpas augstums:
- 500 mm
- Aprīkojums:
- ABS, celtnis, centrālā atslēga, gaisa kondicionēšana, imobilaizersistēma, kvēpu filtrs, piekabes sakabe
Piedāvājuma informācija
- Ieraksta ID:
- A193-40-841
- Atsauces Nr.:
- 1333
- Pēdējoreiz atjaunots:
- 02.1.2461043
Apraksts
FUSO Canter 3S15 with aluminum flatbed and loading crane, available immediately. The vehicle is for rent with an option to purchase.
Chassis: Fuso 3S15 Canter
- GVW: 3,500 kg, payload (complete vehicle with crane and aluminum flatbed) approx. 600 kg
- Manual transmission
- Limited slip differential
- 2 x 100 Ah batteries
- 3,500 kg ball hitch trailer coupling with factory-installed wiring kit
- Heated exterior mirrors
- Automatic climate control
- Radio pre-installation
- Reversing warning system
- PTO with increased rpm
- Battery and AdBlue tank covers
- Prepared for battery isolator relay
- Continental traction tires 195/75/R16C
- Seat covers
Aluminum flatbed:
- Interior: 2,720 mm x 1,820 mm x 400 mm (L x W x H)
- 18 mm floor plate
- Floor frame with airline tracks all around
- Airline track also in the front bulkhead
- Aluminum anodized side panels with fold-out step, easy to remove
- Tool/storage box
- Work lights
- Other flatbed dimensions available upon request
Loading crane: with 3 hydraulic extensions (country of manufacture: Italy)
Gedpfx Aewrivlsfnjtt
- Lifting capacity (manufacturer specs): Max. 995 kg. 3.2 m = 815 kg, 4.4 m = 575 kg, 5.6 m = 400 kg, 6.8 m = 300 kg, 8.05 m = 220 kg
- Manufactured according to CE directive (EN 12999)
- Slewing range 370° (slew limiter 190°)
- All hydraulic cylinders double-acting
- Hard-chromed piston rods
- Pressure relief and load-holding valves
- Emergency stop
- Control block with 5 control valves
- Separate hydraulic tank (33 l) with filter, mounted at crane base
- Outriggers extendable on both sides, special support, support width 3.10 m
- Hydraulic outriggers swiveling 30° and 180°, CE compliant, incl. M.O.L.
- Load hook and fastening brackets
- On-board power supply 12V
- Electronic modules for Danfoss S800 control block (4 functions)
- Danfoss S800 control block, 5 functions incl. high-pressure filter
- Special outriggers, support width 3.10 m (1 pc)
- Surcharge for shortened support legs by 80 mm
- Mechanical boom extension N, 1.30 m stroke (7.0 k)
- Stainless steel bolts and pipe clamps
- Dinitrol treatment (cavity protection)
- Zinc primer
- Switch for work lights near the control block (factory-installed)
- LED work light on knuckle boom (factory-installed)
- LED for 2 support legs
Optional: Rear view camera with Carplay, spade holder, 90° rope, ladder rack/transport frame for front or rear wall, additional tool/storage box available
Errors and prior sale excepted... A/C, automatic climate control, VAT deductible, ABS, electronic immobilizer, central locking with remote control, tow bar, power steering, spare wheel, day cab, crane, new vehicle, emission standard: Euro 6, diesel, rear-wheel drive, excellent condition, hydraulics, fuel consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, rental option, particulate class: 4 - Green.
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Chassis: Fuso 3S15 Canter
- GVW: 3,500 kg, payload (complete vehicle with crane and aluminum flatbed) approx. 600 kg
- Manual transmission
- Limited slip differential
- 2 x 100 Ah batteries
- 3,500 kg ball hitch trailer coupling with factory-installed wiring kit
- Heated exterior mirrors
- Automatic climate control
- Radio pre-installation
- Reversing warning system
- PTO with increased rpm
- Battery and AdBlue tank covers
- Prepared for battery isolator relay
- Continental traction tires 195/75/R16C
- Seat covers
Aluminum flatbed:
- Interior: 2,720 mm x 1,820 mm x 400 mm (L x W x H)
- 18 mm floor plate
- Floor frame with airline tracks all around
- Airline track also in the front bulkhead
- Aluminum anodized side panels with fold-out step, easy to remove
- Tool/storage box
- Work lights
- Other flatbed dimensions available upon request
Loading crane: with 3 hydraulic extensions (country of manufacture: Italy)
Gedpfx Aewrivlsfnjtt
- Lifting capacity (manufacturer specs): Max. 995 kg. 3.2 m = 815 kg, 4.4 m = 575 kg, 5.6 m = 400 kg, 6.8 m = 300 kg, 8.05 m = 220 kg
- Manufactured according to CE directive (EN 12999)
- Slewing range 370° (slew limiter 190°)
- All hydraulic cylinders double-acting
- Hard-chromed piston rods
- Pressure relief and load-holding valves
- Emergency stop
- Control block with 5 control valves
- Separate hydraulic tank (33 l) with filter, mounted at crane base
- Outriggers extendable on both sides, special support, support width 3.10 m
- Hydraulic outriggers swiveling 30° and 180°, CE compliant, incl. M.O.L.
- Load hook and fastening brackets
- On-board power supply 12V
- Electronic modules for Danfoss S800 control block (4 functions)
- Danfoss S800 control block, 5 functions incl. high-pressure filter
- Special outriggers, support width 3.10 m (1 pc)
- Surcharge for shortened support legs by 80 mm
- Mechanical boom extension N, 1.30 m stroke (7.0 k)
- Stainless steel bolts and pipe clamps
- Dinitrol treatment (cavity protection)
- Zinc primer
- Switch for work lights near the control block (factory-installed)
- LED work light on knuckle boom (factory-installed)
- LED for 2 support legs
Optional: Rear view camera with Carplay, spade holder, 90° rope, ladder rack/transport frame for front or rear wall, additional tool/storage box available
Errors and prior sale excepted... A/C, automatic climate control, VAT deductible, ABS, electronic immobilizer, central locking with remote control, tow bar, power steering, spare wheel, day cab, crane, new vehicle, emission standard: Euro 6, diesel, rear-wheel drive, excellent condition, hydraulics, fuel consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, rental option, particulate class: 4 - Green.
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2005
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 5221 ... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Bad Salzuflen
1 155 km
Kravas automašīna ar furgonu un celtni
Fuso3S15 Alu Pritsche 2.80m Ladekran Funk! sofort verfügbar!
Fuso3S15 Alu Pritsche 2.80m Ladekran Funk! sofort verfügbar!
Mazā sludinājuma
Dabrowa k/Opola
822 km
Uz kravas automašīnas uzstādīta platforma
Mercedes-BenzSPRINTER 316CDI PODNOŚNIK KOSZOWY VERSALIFT
Mercedes-BenzSPRINTER 316CDI PODNOŚNIK KOSZOWY VERSALIFT
Mazā sludinājuma
Bad Salzuflen
1 155 km
Pick-up furgons
Fuso3S15 Alu Pritsche 2.80m Ladekran Funk! sofort verfügbar!
Fuso3S15 Alu Pritsche 2.80m Ladekran Funk! sofort verfügbar!
Mazā sludinājuma
Kranenburg
1 325 km
Uz kravas automobiļa uzstādīta darba platforma
NISSANNT400 Cabstar Hubarbeitsbühne *TOPY 11*11Meter*
NISSANNT400 Cabstar Hubarbeitsbühne *TOPY 11*11Meter*
Mazā sludinājuma
Bovenden
1 118 km
Kravas mikroautobuss ar pašizgāzēju
Mercedes-BenzAtego 818 K 4x2 mit Kran Atlas AK 50.1-A2
Mercedes-BenzAtego 818 K 4x2 mit Kran Atlas AK 50.1-A2
Mazā sludinājuma
Lonato del Garda
1 602 km
Darba platforma
IvecoDaily 35S11 Hubarbeitsbühne 22m EU5b
IvecoDaily 35S11 Hubarbeitsbühne 22m EU5b
Mazā sludinājuma
Twist
1 211 km
Darba platforma
Niftylift120 TE MK1D
Niftylift120 TE MK1D
Mazā sludinājuma
Hohentengen
1 422 km
Darba platforma
Niftylift120 TE MK1D
Niftylift120 TE MK1D
Mazā sludinājuma
Bruck i.d. Opf
1 180 km
Uz kravas automobiļa uzstādīta darba platforma
MERCEDES-BENZ313 Hubarbeitsbühne
MERCEDES-BENZ313 Hubarbeitsbühne
Mazā sludinājuma
Weißenfels
1 037 km
Standarta vilcējs
IVECOStralis 420 Atlas KRAN 17m FUNK
IVECOStralis 420 Atlas KRAN 17m FUNK
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda





















































































































































































