Ielu tīrīšanas mašīna

Bucher - GMeiner - Giletta V65t MaxPowa Atego 1324

Operating hours: 409, First registration: 24.10.2024____Two-engine version with JCB 55 kW / Stage V Dual-sided dirt collection, towed Standard equipment Sweeper Controls Main control panel mounted in the center of the cab with JVM for displaying information on a wide range of sweeper functions plus download capability for recorded data. In addition, images from up to four cameras can be displayed on the JVM screen. A separate control console with palm rest for controlling the main sweeping functions is mounted on the door side. Suction fan Variable suction speed from 1800 rpm to 3500 rpm allows adaptation to different application areas. V65t: Higher gear ratio: 1.79:1 Disc brushes (gutter brushes) Quick-change brush system with variable sweeping speed up to 160 rpm (controllable from the cab). Highly visible signal-yellow brush plate and hose guide. Suction nozzle Suction nozzle made of cast aluminum with a 250 mm diameter at the inlet and tool-free adjustment. Dust suppression system Spray heads for dust control are located at the suction nozzle(s), disc brushes, and along the front of the vehicle. "Pressadrain" water recycling system. EUnited 4-star certification for PM10. Electrics 24 V All external wiring harness connections comply with IP67 protection class requirements. External noise / sound power level LWA 108 dB(A) for standard power engines, measured in accordance with EU Directive 2000/14/EC. LWA 112 dB(A) for high-performance engines, measured in accordance with EU Directive 2000/14/EC. Debris hopper The superstructure consists of the debris hopper and integrated water tank. Made of highly durable stainless steel. Watertight rear door locking system with safety lock and drainage function. Two side service doors and side storage compartments. A water strainer allows the use of the debris hopper as a large water tank for street flushing. Rear discharge flap, automatic multi-stage debris hopper support, two protected rear beacons, and LED work lights are standard equipment. Container volume 6.5 m³ Tipping angle 54° (nominal) Door opening angle 125° (nominal) Water tank The baffle-equipped water tank can be filled via a type 'A' hydrant. The double-diaphragm pump is suitable for continuous operation and even dry running. Water volume 1545 l (optionally 2000 l) Exhaust hood The smooth-surface exhaust hood is lined with frequency-tuned sound insulation. Brushes Roller brush Ø 406 mm Roller brush width 1275 mm Suction nozzle width 750 mm Disc brushes 500 mm (optional Ø 650 mm) Optional equipment Sweeper - Auxiliary engine: JCB 55 kW turbocharged, low emissions in accordance with Stage V, REQUIRES EN590 (or equivalent) LOW-SULFUR FUELS - Right-hand configuration of sweeping assemblies - Final assembly on supplied MB Atego 1324 - Pneumatic lifting and lowering of the air guide strainer in the debris container - Pneumatically operated vibrating device for air guide strainer - Chain curtain in the debris container in front of the air guide strainer - Water tank connection coupling type A, Storz 2 1/2 inch - Wastewater drain strainer with graduated perforation, mounted on the rear door, enables more efficient
Ledpfx Aswxn Uajggjta

Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.