EvakuatorsMERCEDES-BENZ
Arbeitsbühnen Maschinentransporter Rampen
Evakuators
MERCEDES-BENZ
Arbeitsbühnen Maschinentransporter Rampen
fiksēta cena bez PVN
187 000 €
(222 530 € bruto)
Izgatavošanas gads
2025
Stāvoklis
Jauns
Atrašanās vieta
Petershagen 

Rādīt attēlus
Rādīt karti
Pamatdati
Cena un atrašanās vieta
fiksēta cena bez PVN
187 000 €
(222 530 € bruto)
- Pārdevēja atrašanās vieta:
- Auf der Tappenau 15, 32469 Petershagen, Vācija

Zvanīt
Tehniskā informācija
- Nobraukums:
- 100 km
- Jauda:
- 290 kW (394,29 zs)
- Degvielas veids:
- dīzeļdegviela
- Pārnesuma veids:
- automātisks
- Asu konfigurācija:
- 3 asis
- Kopējais svars:
- 26 000 kg
- Krautuves garums:
- 8 800 mm
- Iekraušanas vietas platums:
- 2 550 mm
- Iekraušanas telpas augstums:
- 1 050 mm
- Krāsa:
- balts
- Aprīkojums:
- ABS, gaisa kondicionēšana, kvēpu filtrs, navigācijas sistēma, stāvvietas sildītājs
Piedāvājuma informācija
- Ieraksta ID:
- A196-83-366
- Atsauces Nr.:
- Actros Bauma-N1
- Pēdējoreiz atjaunots:
- 14.1.2461055
Apraksts
Brand new Mercedes Benz Actros 2540L 6x2, configured as a construction machinery and access platform transporter.
Truck equipment:
- Long-distance driver cab
- Auxiliary heater
- Safety package
- Driver comfort package
- Trailer package
Gtodpfx Ajw E Abhjfnst
- Steerable trailing axle
- LED rear lights
- Euro 6e
- Automatic transmission
- Sun visor
- Beacon lights
- Multifunction steering wheel
- 1 sleeping bunk
- Refrigerator
- Navigation system
- 26,000 kg gross vehicle weight
- Automatic climate control
- White - Long-distance specification - etc.
Body:
- Superstructure made from laser-cut and bent special profiles, low-floor design
- Body length approx. 8,800 mm (minus approx. 490 mm for storage box)
- Frame height unladen approx. 1,050 mm
- Frame width approx. 2,550 mm
- 2 ramp units, each with 1 fixed section + 1 retractable section, ramps can be shifted laterally
- Ramp surface made of grating, mechanical ramp locking including bracket on the outer frame for storage (straps available on request)
- Ramp operation via electro-hydraulic aggregate, incl. emergency control unit on the control block and hand pump for total failure
- Hydraulic rear supports
- All hydraulic functions can be operated via radio remote control
- Grating floor with increased load capacity
- Rear with bevel, front wall approx. 2,000 mm high with inward-bent profiles
- Stainless steel storage box inside in front of the front wall
- 2 stainless steel side toolboxes on the chassis for lashing equipment (1 left, 1 right)
- 1 stainless steel toolbox at rear right (for hydraulic unit and control block)
- Working lights: 1 pair on the rear wall of the cab, 2 pairs on each chassis side, 2 pairs at the rear
- 2 access ladders for load area access
Load securing:
- Longitudinal beams with Multi-X contour including lashing points (2.5 t each)
- 6 pairs of 6 t lashing points integrated into the longitudinal beams
- Outer frame with perforated design including 2.5 t lashing points
- 6 pairs of 6 t lashing points integrated into outer frame
- 4 pcs. 6 t lashing points at the rear
- 4 pcs. 6 t lashing points ahead of the front wall storage box (lower side)
Paintwork:
- Body KTL powder coated in RAL 9005 black
- Front wall painted in RAL 9005 black
- Ramps and gratings are hot-dip galvanized
Markings:
- Reflective tape on sides and rear according to EC standards.
Further information available upon request.
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Truck equipment:
- Long-distance driver cab
- Auxiliary heater
- Safety package
- Driver comfort package
- Trailer package
Gtodpfx Ajw E Abhjfnst
- Steerable trailing axle
- LED rear lights
- Euro 6e
- Automatic transmission
- Sun visor
- Beacon lights
- Multifunction steering wheel
- 1 sleeping bunk
- Refrigerator
- Navigation system
- 26,000 kg gross vehicle weight
- Automatic climate control
- White - Long-distance specification - etc.
Body:
- Superstructure made from laser-cut and bent special profiles, low-floor design
- Body length approx. 8,800 mm (minus approx. 490 mm for storage box)
- Frame height unladen approx. 1,050 mm
- Frame width approx. 2,550 mm
- 2 ramp units, each with 1 fixed section + 1 retractable section, ramps can be shifted laterally
- Ramp surface made of grating, mechanical ramp locking including bracket on the outer frame for storage (straps available on request)
- Ramp operation via electro-hydraulic aggregate, incl. emergency control unit on the control block and hand pump for total failure
- Hydraulic rear supports
- All hydraulic functions can be operated via radio remote control
- Grating floor with increased load capacity
- Rear with bevel, front wall approx. 2,000 mm high with inward-bent profiles
- Stainless steel storage box inside in front of the front wall
- 2 stainless steel side toolboxes on the chassis for lashing equipment (1 left, 1 right)
- 1 stainless steel toolbox at rear right (for hydraulic unit and control block)
- Working lights: 1 pair on the rear wall of the cab, 2 pairs on each chassis side, 2 pairs at the rear
- 2 access ladders for load area access
Load securing:
- Longitudinal beams with Multi-X contour including lashing points (2.5 t each)
- 6 pairs of 6 t lashing points integrated into the longitudinal beams
- Outer frame with perforated design including 2.5 t lashing points
- 6 pairs of 6 t lashing points integrated into outer frame
- 4 pcs. 6 t lashing points at the rear
- 4 pcs. 6 t lashing points ahead of the front wall storage box (lower side)
Paintwork:
- Body KTL powder coated in RAL 9005 black
- Front wall painted in RAL 9005 black
- Ramps and gratings are hot-dip galvanized
Markings:
- Reflective tape on sides and rear according to EC standards.
Further information available upon request.
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 5704 ... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Petershagen
1 126 km
Automašīnu pārvadātājs
MERCEDES-BENZArbeitsbühnen Maschinentransporter Rampen
MERCEDES-BENZArbeitsbühnen Maschinentransporter Rampen
Mazā sludinājuma
Deventer
1 291 km
Autotransportieris
MANTGA 26.390 6x2 oprijvrachtwagen / machinetransp...
MANTGA 26.390 6x2 oprijvrachtwagen / machinetransp...
Mazā sludinājuma
Petershagen
1 126 km
Automobilis ar plakanu platformu
MERCEDES-BENZArbeitsbühnen Maschinentransporter Rampen
MERCEDES-BENZArbeitsbühnen Maschinentransporter Rampen
Mazā sludinājuma
Carditello
1 924 km
Kravas automašīnas rāmis
VolvoFH 460 PORTACASSE L/TELAIO 2023
VolvoFH 460 PORTACASSE L/TELAIO 2023
Mazā sludinājuma
Dabrowa k/Opola
822 km
Pašizgāzējs
Mercedes-BenzUNIMOG U435 4X4 SKRZYNIA OTWARTA
Mercedes-BenzUNIMOG U435 4X4 SKRZYNIA OTWARTA
Mazā sludinājuma
Almelo
1 259 km
Autotransportieris
MANTGS 26.360 6x2 Bickeltec
MANTGS 26.360 6x2 Bickeltec
Mazā sludinājuma
Röttenbach
1 246 km
Specializētais kravas auto
MERCEDES-BENZActros 4148 8X8 mit Fassi Kran F660A
MERCEDES-BENZActros 4148 8X8 mit Fassi Kran F660A
Mazā sludinājuma
Petershagen
1 126 km
Evakuators
MANTGX 26.440 6x2 LL Schwerlast Ladebordwand/Rampe
MANTGX 26.440 6x2 LL Schwerlast Ladebordwand/Rampe
Mazā sludinājuma
Fliessem
1 413 km
Kravas automašīnas šasija
MERCEDES-BENZAntos 2533 6x2 - 3 x am Lager -
MERCEDES-BENZAntos 2533 6x2 - 3 x am Lager -
Mazā sludinājuma
Geffen
1 362 km
Autotransportieris
Mercedes-BenzActros 1936 LL Machine Oprijwagen
Mercedes-BenzActros 1936 LL Machine Oprijwagen
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda


























































































































































