Darba platformas puspiekabe

KÖGEL 3-Achs-Mega Chassis, Bordwände

You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website.
Ijdpfx Aow E A Emog Rjbc

Excerpt from the equipment list. Full equipment specification available on request.

Chassis
* Standard ladder-type frame in lightweight steel construction with inserted cross members
* Coupling plate approx. 8 mm thick, with a dual kingpin according to DIN 74080 / ISO 337

Running Gear
* Axle lift mechanism on the axle
* Fully automatic, load-dependent axle lift control
* Start assist: Activation via 3x braking, 30% overload up to a speed of 25 km/h
* BPW three-axle assembly ECO Air, with disc brakes approx. Ø 430 mm, offset approx. 120 mm
* Air suspension with approx. 180 mm stroke

Vehicle Tyres
* Wheels fitted with internal sensors in accordance with UN ECE R141
* Six 385/65 R 22.5 UNIROYAL TH 50 tyres
* Six steel rims 22.5 x 11.75, offset approx. 120 mm (ET 120)

Chassis Attachments
* Landing gear (make at Kögel’s discretion) mechanical with compensating foot, approx. 24 t lifting capacity, single-sided operation on the right in direction of travel
* Spray suppression system in accordance with Regulation (EU) No. 109/2011 on three-axle assembly with 385/65 R22.5 tyres consisting of: 1 pair of quarter-circle mudguards in front of the axles, 1 pair of straight mudguards with mudflaps between 1st and 2nd axle, and 1 pair of quarter-circle mudguards with mudflaps behind the axles
* Sideguard protection according to ECE-R73
* 2 plastic toolbox containers, waterproof, internal dimensions approx. 545 x 400 x 400 mm
* Rear right extendable access ladder
* High, rigid rear under-run protection in steel according to ECE-R58
* 1 pair each of extendable warning signs for overwidth loads, retro-reflective red/white, with LED lighting, coiled cable and plug connector. Fitted at the front and rear of the vehicle

Brake / Air Suspension System
* Wabco EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connection ISO 7638 (without connecting lines), parking brake as spring-loaded brake, external pneumatic connections and external EBS diagnostic connector via ISO 7638 plug
* Air suspension system incl. 1 lift and lower valve, mounted left in the direction of travel behind the axle assembly. Driving position adjusts automatically
* 2 anti-swapping coupling heads at the front ISO 1728
* Steel air reservoirs for brake system and air supply (EN 286-2)

Floor
* Board floor approx. 30 mm thick, circumferentially sealed
* Socket pockets for square insert posts approx. 80 x 80 mm, arrangement according to drawing J9: 8 socket pocket strips (18 pockets per strip: 4 outside + 10 centrally positioned)

Front Wall
* Storage for up to 14 square insert posts approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall
* Front wall approx. 2,000 mm high with volumetric corner stanchions in steel, profiled steel sheeting, bolted/riveted to frame
* 2 pairs of lashing points (permissible lashing capacity approx. 1,000 kg per ring) on the front wall according to EN 12640

Side Wall
* VarioFix steel perforated external frame
* 24 pairs of lashing rings in the external frame (to EN 12640), permissible pulling force approx. 5,000 kg per ring

Impact Protection
* 1 pair of steel impact buffers approx. 160 x 85 x 85 mm mounted externally on the frame end plate
* Crosswise zinc-plated steel angle as forklift protection, as well as central lock cam protection, mounted on the frame end plate

Electrical / Elect

Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.