Silo puspieka

Spitzer SF 2739/2P Siloauflieger ca. 39m³, 2x Liftachse

Vehicle location: Bovenden, air suspension, 3 axles, BPW axles, catwalk
Superstructure: List price €80,000.00 net. 1 x Spitzer silo semi-trailer type SF 2739/2 P
Rcedpfx Asw H Dk Hoc Neh
Equipment description:
(designed for use in Western Europe due to construction type)

1. Tank
Self-supporting tank construction, outlet cones with a minimum angle of 45° and removable outlets, Ø 800 mm. Tank material AlMg 4.5 Mn. Design, manufacturing, and acceptance according to the current Pressure Equipment Directive
2 x reinforcement gusset plates (base plates Ø 400 mm) in the cone/shell area, mounted on the right and left sides per cone
3 x filling ports, hinged/swing, with stainless steel toggle fasteners, flush inside, Ø 450 mm, including rubber support
Rain gutter closed at the front, open at the rear
Catwalk and folding safety rail (height: 1.0 m) left side, with rear access ladder. Folding rail mounted in Teflon bushings, pneumatically operated from below. Ladder and folding safety rail in anodized aluminium, all components made from non-corrosive materials

2. Discharge system
2 x MPO outlet DN 800/150/80, aluminium with bolted steel hopper, with mat aeration.
The aeration mat is accessible from outside after removing the outlet
2 x floor inspection hatches with steel plate, black gasket and remote control mounted on the outlet hopper. Discharge line DN 80, made of steel, routed to the rear.
1 x sampling valve 1" mounted on the discharge line (position: after the first shut-off device)
1 x ball valve with remote control DN 80, ring nozzle and Storz B coupling with steel insert mounted at the pipe end
2 x pinch valves DN 80 as shut-off elements in the line
1 x ring nozzle DN 80 mounted in the line, using the standard auxiliary air supply (position: mounted directly after the pinch valve of cone 1)

3. Air Distribution
1 x compressor hose DN 65, plastic, Storz B coupling, approx. 2.87 m long, with integrated clamps. Air distributor pipe 2 1/2" aluminium, left side, front with 90° bend, straight seat check valve (brass) and Storz B coupling. External air connection, with 90° bend and Storz C coupling mounted at the end of the air distributor pipe, in the area of the rear support.
Top air operated via high-quality sleeve ball valves 2", 2 x auxiliary air with 2" angle seat check valve brass and 2 x aeration 1 1/2". Tank pressure gauge and safety valve mounted on aluminium cast top air adapter, with 2" vent valve. Air routed upwards onto the tank via exhaust hose.
1 x top air 2", rear left, in hose version with integrated clamps. Air hoses for auxiliary air and aeration with integrated clamps. 1 x additional tank pressure gauge mounted on the front air distributor pipe.

4. Chassis
BPW axle assembly, ET 0, ... ACCESSORY DATA WITHOUT GUARANTEE, changes, prior sale and errors excepted!

Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.