Priekšējās iekrāvēja autoiekrāvējs

STILL RX 50-13 Triplex Elektro Stapler ife

Still RX 50-13 Triplex Electric Forklift Truck with Meyer Paper Roll Clamp Attachment

Operating hours: approx. 6,100
The hour meter has recently become defective.

Paper Roll Clamp:
Manufacturer: Meyer
Type: 5-2101N
Load capacity: 1,100 kg
Dead weight: 340 kg
Center of gravity: 221 mm
Hydraulic working pressure: 150 bar
360° rotatable
Clamp arms: 560 x 220 mm
Roll diameter: 195 – 1,200 mm
Short arm fixed
Protrusion: 180 mm
Mounting: ISO II
Clamp arms with structured coating
Year of manufacture: 2007

Still RX 50-13 Triplex Electric Forklift

Drive type: Electric
Mast: Triplex
Full free lift
Two additional hydraulic circuits for the paper roll clamp
Standard overhead guard
Front left headlight
Direction switch
LCD display
Tilt cylinders front/rear: 3/5
Bsdsw I Ifvspfx Abzslp
Zero point sensor in counterweight
4-way proportional valve block
Rated drive power: 4 kW
Weight without battery: 1,966 kg
Weight with battery: 2,554 kg
Rated capacity: 1,250 kg
Permissible total weight: 4,800 kg
Permissible front axle load: 4,290 kg
Permissible rear axle load: 1,650 kg
Overall height: 2,160 mm
Rated lift height: 4,770 mm
Control: seated
Rated lifting capacity: 1,250 kg
Load center distance: 500 mm
Load distance: 330 mm
Wheelbase: 1,136 mm
Axle load with load, front/rear: 3,247 / 564 kg
Axle load without load, front/rear: 1,084 / 1,477 kg
Tyres: Superelastic
Tyre size, front: 180/70-8 mm
Tyre size, rear: 180/70-8 mm
Number of wheels (x = driven), front/rear: 2 / 1 x
Track width, front/rear: 840 / – mm
Mast/fork carriage tilt forward/backward: 3 / 5 °
Mast height lowered: 2,160 mm
Mast height extended: 4,770 mm
Seat height relative to SIP: 953 mm
Overall length: 2,800 mm
Overall width with attachment folded: approx. 1,250 mm
Overall width without attachment: approx. 1,060 mm
Turning radius: 1,391 mm
Travel speed with/without load: 12.0 / 12.5 km/h
Lifting speed with/without load: 0.33 / 0.54 km/h
Lowering speed with/without load: 0.54 / 0.60 km/h
Drawbar pull with/without load: 1,400 / 1,700 N
Max. drawbar pull with/without load: 3,500 / 7,150 N
Gradeability with/without load: 5.0 / 8.5 %
Max. gradeability with/without load: 19.0 / 25.0 %
Acceleration time with/without load: 5.3 / 4.8 s
Service brake: hydraulic
Drive motor, output S3 60 min: 4.9 kW
Lift motor, output at 15% duty cycle: 7.6 kW
Power consumption 60 VDI work cycles/hour: 4.2 kWh/h
Working pressure for attachments: 230 bar
Oil flow for attachments: 30 l/min
Sound pressure level at operator position: 63.9 dB(A)
Lead-acid battery
Battery weight: 588 kg
Battery voltage: 24 V
Battery capacity: 805 Ah

Charger:
Manufacturer: STILL
Type: GFS PLA Puls D24/125P
Mains: 3x400V 50Hz 7.5A
Mains fuse: 16A
Output voltage: 24V
Output current: 125A
Battery: 12 Pb cells
Charging characteristic: WpWa
Protection type: IP21
Three-phase current

Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.