Zema profila puspiekabe

FAYMONVILLE MAX Trailer MAX510 Tiefbett 2x10 t

You can find our complete stock of immediately and soon-to-be available vehicles on our website.

Excerpt from equipment specification. Complete specification available on request.

Load area:
- Low-bed design with central beam, extendable version, approx. 6,750 mm in length
- 5 pairs of fold-out external lashing rings (LC 5,000 daN)
- 1 pair of fold-out external lashing rings (LC 10,000 daN)
- 1 pair of flat-mounted lashing rings at the rear of the loading platform (LC 10,000 daN)

Gooseneck:
- Hydraulic lifting/lowering gooseneck, detachable

Rear chassis:
- Short rear chassis with closed outer frame and checker plate covering
- Chassis with excavator trough, closed in the rear half for housing the air tanks
- 2 pairs of fold-out external lashing rings (LC 5,000 daN)
- 1 pair of fold-out external lashing rings (LC 10,000 daN)
- 1 pair of flat-mounted lashing rings at the rear of the chassis (LC 10,000 daN)

Axles:
- BPW axles, hydro-mechanically forced steering
- Air suspension with raise/lower control valve

Tyres:
- Tyres 245/70 R 17.5, 3PMSF
- TPMS: Tyre Pressure Monitoring System according to ECE R 141

Brake system:
- Wabco braking system in accordance with EU regulations with EBS-E (2S2M)

Paintwork:
- High-quality single-tone 2-component (2K) top coat in RAL 3000 Flame Red

Including the following additional equipment:
- 2 kingpins
- Galvanised steel front wall, approx. 400 mm high
- Remote steering from front and rear, operated by cable remote control with push buttons, including single tracking control for the axles (no installation in the tractor unit)
Ledpfoxf Silex Ai Ajrr
- Electro-hydraulic unit
- Axle load gauge including load diagram
- On the gooseneck, removable aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). Rear galvanised stake pockets are removable. (Body length approx. 2,560 mm)
- Separate air connection with air gun on the gooseneck
- 2 work lights with switch on the trailer, mounted on the left and right of the gooseneck platform
- 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck
- 6 pairs of stake pockets for insertable posts approx. 100 x 50 mm in the outer frame of the load area, 2 pairs in the chassis outer frame
- Galvanised, extendable width extensions approx. 230 mm per side
- Hydraulic connections from gooseneck to low bed with multi-coupling (instead of screw couplings). No seal guarantee included.
- Central lubrication system with 2 BEKAMAX (Pico) pumps, standard NLGI-2 grease, with removable protection around the pump
- 2 pairs of WADER container locks on the loading area, for 1x20' container
- 1 removable galvanised intermediate table with 1 pair of WADER container locks
- 1 pair of steel ramps for bridging the low bed’s hook mountings
- Anti-slip sand-coated layer painted on the load area
- HRM Metallisation (High Resistance Metallisation)

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.