Darba platformas puspiekabe

FAYMONVILLE MAX Trailer MAX210 Telesattel

Equipment Highlights

Loading Platform:
- Extendable loading platform with pneumatically actuated locking mechanism.
- Decking made of approximately 30 mm thick wooden planks.
- 7 pairs of fold-out lashing rings (LC 5,000 daN).
- 3 pairs of fold-out lashing rings (LC 10,000 daN).
- Cutouts in the outer frame of the loading area for attaching tension straps (LC 2,000 daN).

Landing Legs:
- JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load).

Tyres:
- Tyres 385/65 R 22.5, brand of our choice.

Axles:
- BPW axles and suspension, all axles hydro-mechanically forced-steered.
- Equipped with disc brakes.
- Technical axle load: 10,000 kg (ET 0).
- Air suspension with lift and lower valve.

Braking System:
- WABCO braking system according to EU regulations with EBS-E (2S2M), no connecting lines to the tractor unit.

Paintwork:
- High-quality 2K top coat, single colour in RAL 3002 carmine red.

Accessories:
- Remote rear and front axle steering via cable remote control with push buttons, including single-track monitoring of the axles (without installation on tractor unit).
- Electro-hydraulic power pack (± 45 kg).
- 4 wheel chocks with holders on the front wall (± 5 kg).
- 2" kingpin.
- Front galvanized coupling bracket with yellow-red air couplings.
- Bracket for warning beacon at the rear of the trailer.
- 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, in the outer frame of the loading platform (± 30 kg).
- 1 spare wheel holder underneath the loading platform, right-hand side in direction of travel (without spare wheel).
- Load gauge for axle load determination including load diagram.

Including Special Equipment:
Dksdpfoxl Nf Djx Ad Rou
- Galvanized steel front wall (EN12642-XL), approx. 1,600 mm high (± 35 kg).
- 6 pairs of WADER container pockets in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; an additional locking point is provided in the extension for a 45' container (± 90 kg).
- 4 pairs of transverse stake pocket rails mounted in the loading platform, for plug-in stakes approx. 100 x 50 mm (± 145 kg).
- Rack for up to 9 pairs of plug-in stakes bolted inside the front wall (± 34 kg).
- Access ladders mounted on both left and right sides in direction of travel (± 24 kg).
- One INOX toolbox, approx. 1,200x460x550 mm, mounted in direction of travel left, underneath the loading platform at the front (± 75 kg).
- An additional INOX toolbox, approx. 1,200x460x550 mm, mounted underneath the loading platform in direction of travel left (± 75 kg).
- Loading platform with approx. 30 mm thick timber floor, fitted in omega profiles.
- Lift axle on front axle with control via TEBS E.
- Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2.
- 2 LED reversing lights mounted on the rear panel.
- 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear (± 16 kg).
- HRM metallisation (High Resistance Metallisation).

Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.