Pašizgāzēja puspiekabe

CARNEHL CHKS 26m3 5,98t ALCOA ppe HARDOX SAF TÜV

WhatsApp

CARNEHL 26m³ HARDOX 2-Axle Tipping Semi-Trailer, First registration 02.06.2021

GERMAN TRAILER, 1st owner
4x NEW tyres
Brake pads NEW
1x Brake cylinder NEW
Roadworthiness test (SP) NEW
Main inspection (HU) valid until 06/2026
Mileage approx. 479,600 km

Equipment:
Gross weight: 32,000 kg
Unladen weight: approx. 5,980 kg
Fifth wheel load: approx. 14,000 kg
Axle loads: 2 x 9,000 kg

Dimensions:
Length (internal): approx. 7,600 mm
Width (internal): approx. 2,340 mm
Side wall height: approx. 1,460 mm
Load volume: approx. 26 m³
Colour: silver grey

Chassis: SHK-2-ST-74
Proven welded construction using high-quality fine-grained steels, designed for 7350/7400 mm body length, sandblasted and primed
Chassis in reinforced version for half-shell body
Continuous 8 mm fifth wheel plate
2" kingpin
Upper longitudinal members of the chassis welded at an angle to match the body shape
Rubber body mounts on both sides of the upper chords
Tow coupling
Aluminium folding ladder (8 rungs), 2450 mm long, mounted on the chassis
Cpjdjx Ntr Sopfx Aaxeu
Folding underrun protection, installed according to EC directives
Support preparation (brackets only)

2x SAF axles - 9 t integral axle assembly (OFF-ROAD 430 mm disc ET 120)
Wheelbase 1,310 mm, track width 2,040 mm, with air suspension, 1x ABS
ALCOA Dura Bright (polished + coated) 11.75R22.5 ET120
Tyres: 385/65 R22.5, 4x 100% NEW, see photos
Brake system: WABCO EBS-E 2S/2M + RSP with integrated air suspension
DUOMATIC coupling
SAF TyrePilot automatic tyre inflation system
Parking brake via spring-loaded actuator
Automatic lowering during tipping with cut-off
Aluminium air tanks
Lifting and lowering device for air suspension, with Smart Board control panel
Load pressure gauge on front wall
Electrics to ECE-R 48, 24V system
1x 15-pin socket
6 round LED 3-chamber tail lights
Front outline marker lights (LED, white); rear (red/white)
LED side marker lamps yellow with integrated reflectors
LED number plate light for single-row number plates
Rear fog lamp
3x reversing spotlights for trailer, Workpoint LED 1500
Alu chequer plate lamp guards
Indicator function for side marker lamps

Front lifting cylinder by HYVA ALPHA, ND/HD, working pressure up to 250 bar
Working volume 86 L, required min. tank fill volume 116 L
Complete with pipes and NW-25 connectors
1" coupling plug
Tipping angle 50°-52°
Grease nipples extended to front for easy access

Superstructure SHG-4.3-146-740
Rear tipper body Xtra
24 m³, 7,400 mm x 1,460 mm from folded half-shells
Longitudinal seam welded continuously
Floor area 5 mm, side walls 5 mm HARDOX 450 HB
Additional 4 mm reinforcement in the discharge zone under the floor, tapering to the front over the trigger lever
Upper chords on both sides edged, 3 mm HARDOX 450 HB
Straight, pressed front wall, 3 mm fine-grained steel S700
Rear wall hydraulically opening SHG-4-146-B1.460 mm, opposite side
Rear wall panel 4 mm pressed fine-grained steel, swinging, slightly slanted, flush with upper edge of the body
Automatic 2-hook central locking
Closure hooks on the upper edge, both sides beveled 45 degrees
Rubber seal for rear wall, inverted
Additional side locking for tailgate
Double hinge incl. wedge lock for opposite rear wall
Aluminium platform mounted on chassis
With broom and shovel holder, center access
Domar DK-4175 plastic half-shell mudguards with original brackets
Splash guards on rear axle
2 steps inside at front wall
2 wheel chocks with holders
Shortening of the mudguards on the last axle with bolted...

Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.