Miniekskavators

KUBOTA Kompaktbagger KX037-4 MS03 3.+4. Steuerkreis

SN: 209

Kubota compact excavator KX037-4 with quick coupler MS03
3rd and 4th control circuits AUX1/AUX2, proportionally controlled
Load hook on MS03 quick coupler, factory installed
Boom arm 1,525 mm

Machine weight: approx. 3,695 kg

3rd and 4th control circuits AUX1/AUX2, proportionally controlled,
Load holding valve for boom cylinder,
Load holding valve for arm cylinder,
Load hook on MS03 quick coupler, factory installed,
Changeover valve for pressureless return for hydraulic hammer,
Battery main switch,
Boom arm 1,525 mm,
3-cylinder KUBOTA engine,
Rubber tracks,
Dozer blade,
Radio preparation,
Sliding front window,
Mechanically sprung driver's seat,
Digging depth: approx. 3.545 mm,
Digging depth: approx. 3.410 mm,
2 work lights, halogen, on top of the cabin,
1 work light, halogen, on the boom

Accessories:
1 ditching bucket,
Width: 400 mm,
Attachment: MS03 Symlock,
Bucket transport hook,
Full cutting edge,

Standard equipment:

Engine/fuel system:
Original KUBOTA engine,
Double air filter element,
Acoustic refueling system,
Battery disconnect switch,
Water separator with drain valve,
Idle speed control,

Undercarriage:
Short-pitched rubber track 300 mm,
2 travel speeds, fast/slow,
Lajdpex Tli Defx Ahzod
Automatic, load-dependent speed change,
4 externally guided lower rollers per side,
1 upper roller,

Hydraulic system:
2 variable axial piston pumps and 1 gear pump,
Emergency lowering via pressure accumulator,
Hydraulic test ports,
Straight-ahead driving function,
Auxiliary circuits routed to the end of the boom arm,
Auxiliary circuit (AUX1) with max. adjustable hydraulic oil flow,
Auxiliary circuit AUX1 proportionally controlled via the right joystick / Auxiliary circuit AUX2 proportionally controlled via the left joystick, standard equipment for Germany and Austria,
Direct tank return line for auxiliary circuit AUX1,

Safety system:
Engine safety start device in the left control console,
Hydraulic locking system,
Braking system for upper carriage rotation,
Travel motors with braking system,
Original Kubota anti-theft system,
Safety/hose rupture safety valves for boom arm and boom (ISO8643),

Work equipment:
1,525 mm long boom arm,
One work light on the boom,

Cabin:
ROPS (Roll-Over Protective Structure, ISO 3471),
OPG (Operator Protective Guard, Top Guard Level I, ISO 10262),
Cabin heater with front window defrosting and air dehumidification,
Fully suspended driver's seat with weight-dependent adjustment (fabric seat),
Retractable seat belt,
2 work lights on the cabin,
Radio installation kit in the cabin (2 speakers, radio antenna, and radio compartment),
Hydraulic control levers with wrist rests,
Display unit with diagnostic function,
Front window opening system with gas spring support,
Mounting points for front window guard,
Switch and wiring harness for beacon,
12 V power supply,
Emergency hammer for emergency exit,

Technical data - dimensions with cabin:
Overall width: approx. 1,550 mm,
Overall height (cabin): approx. 2,470 mm,
Overall length: approx. 4,900 mm,
Ground clearance: approx. 285 mm,
Dozer blade width x height: approx. 1,550 x 340 mm,
Rubber track width: approx. 300 mm,
Minimum front turning radius without boom swing: approx. 2,100 mm,
Minimum front turning radius with boom swing to the left: approx. 1,730 mm,
Boom swing angle (left/right): 69 / 49 °,

Technical data - with cabin:
Machine weight with cabin: approx. 3,695 kg,
Operating weight with cabin: approx. 3,770 kg,
Bucket capacity (standard: SAE/CECE): 0.1

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.