Zema profila puspiekabe

GOLDHOFER 3-achs Satteltieflader mit zwei Radmulden

Brake System:

* Knorr EBS-E (electronic braking system with RSS roll stability control)
* Emergency release mechanism for spring brake cylinders
* Drum brakes

----Axle:

* Load-dependent lift axle on the 1st axle including starting aid (forced lowering of the lift axle via TIM possible)
* Last axle is a friction-steered trailing axle (reverse steering lock via reverse gear)
* BPW Eco Max axles

----Suspension:

* Air suspension with lifting and lowering system

----Electrics / Lighting:

* Knorr Trailer Information Module
* Reversing camera
* Acoustic reversing alarm
* 15-pin and 2 x 7-pin sockets
* LED lighting
* LED beacon

----General Fittings:

* BPW landing gear at front
* One plastic toolbox each in front of the landing gear
* Mechanically spring-assisted drop legs at the rear for supporting during loading
* Mechanically adjustable warning sign sets at the landing gear area and at the ramps on the rear

----Gooseneck:

* Steel floor
* Front wall, 400 mm high
* Enclosed toolbox with folding lid in front of front wall, approx. 2,400 x 500 x 550 mm
Gedpfjx Uvn Hjx Afnott
* Front corners 90°, plus 2 plug-in aluminium sideboards per side, 400 mm high (approx. 3,150 mm long)
* 3 pairs of 5 t retractable UVV lashing rings per side on gooseneck
* 2 pairs of stake pockets
* Closed outer frame with cutouts for 1.5 t lashing straps
* 1 pair of central stake pocket rails

----Lowbed Deck:

* Steel floor
* Closed outer frame with cutouts for 2 t lashing straps
* 6 pairs of 10 t lashing points in outer frame
* 1 pair of 10 t lashing points at centre of load area behind gooseneck and at the rear
* 2 pairs of 100 x 50 mm stake pockets per side in outer frame

----King Pin:

* 2" king pin with second screw-in position

----Excavator Arm Rest:

* Approx. 3,450 x 760 mm incl. 2 t long holes for load securing
* Excavator arm trough covered with 2 folding lids

----Wheel Wells:

* 1 pair of wheel wells - bottom 1,840 mm, top 2,840 mm long - in front of 1st axle, 390 mm deep, with climbing strips in the slopes
* 1 pair of wheel wells - bottom 560 mm, top 1,640 mm long - between 1st and 2nd axle, 390 mm deep, with climbing strips in the slopes
* Different wheel well depths by using wheel well covers (depth approx. 390 mm and 260 mm)
* ALLTEC aluminium wheel well covers "Premium" 600 mm wide

----Widening:

* Prepared for extension beams for 3,000 mm width with 8 t axle load
* 2 widening beams per side mounted in outer frame for total width of 3,000 mm

----Ramps:

* Lateral climbing strips in rear slope
* Sled-type design for easy mounting and removal of ramps
* ALLTEC VFR 120 R single-piece aluminium loading ramps approx. 2,500 x 600 mm (pair load capacity 24 t)
* Mechanically adjustable sideways

----Load Dimensions:

Gooseneck:

* Approx. 3,700 x 2,550 mm, incl. 550 mm approach slope to lowbed deck

Lowbed length:

* Approx. 8,700 x 2,550 mm, incl. 550 mm approach slope, 8° at rear

----Loading Height:

* Approx. 855 mm

----Paintwork:

* Frame finished with corrosion-resistant zinc dust primer and effective cavity sealing

----Coupling Height:

* Approx. 1,220 mm

----Notes:

* Subject to errors and prior sale

----Delivery Time:

* Available immediately ex Egestorf (A7 motorway)

Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.