Riteņu iekrāvējs

WACKER Neuson WL60 Gabel+Schaufel 1,1m³ nur 890BH

Wacker Neuson WL60 Wheel Loader
Bucket 1.10 m³ + Pallet Fork

Power: 75 kW / 102 hp, Perkins MPKXL03.6FX1 engine, Tier 4 final

Operating weight: 5,900 kg

Axles: ZF Friedrichshafen AG

2 speed ranges

Engine: Perkins MPKXL03.6FX1 Tier 4 final

4-cylinder diesel engine with DOC + SCR,
Diesel particulate filter,
Power: 75 kW / 102 hp,
AdBlue,
Fuel tank capacity: 105 liters,
Hydraulic tank: 95 liters,
Travel speed: 20 km/h,
Hydrostatic drive via prop shaft,
Lighting according to StVZO regulations,
2x work lights front upper cab,
2x work lights rear on cab,
Rear view mirrors left and right,
Interior mirror,
1x rotating beacon,
1x towing hitch,
Full cab with doors on both sides (Comfort 2-door cab),
Wipers front and rear window,
Rear window heater,
Overhead protective grid,
Hydraulic quick coupler (Weidemann SWP hydr.),
Dumping height: 2,189 mm,
Differential lock,
3rd hydraulic circuit,
Flat-sealing couplings on 3rd circuit BG3,
Pressureless return,
Leak oil line,
Float position for lift cylinders,
3rd circuit locking via switch (continuous operation),
Kdsdpfxoyl Dxae Ac Doh
Oil flow adjustment via jog-dial,
Pressure relief for hydraulic connections on loader arm,
Switch for hydraulic coupling pressure relief in cab,
On-board tool kit,
Operator's manual,
Grammer driver's seat,
Electric battery master switch,
Tires: ALLIANCE 405/70R20IND

Tipping load with bucket - straight: 3,674 kg,
Tipping load with bucket - articulated: 3,031 kg,
Tipping load with pallet fork - straight: 3,344 kg,
Tipping load with pallet fork - articulated: 2,791 kg

Accessories:
Weidemann standard bucket,
Earthmoving bucket without teeth,
Type: RL60,
Heaped bucket volume: 1.10 m³,
Width: 2,100 mm,
Weight: approx. 530 kg,
Bolt-on cutting edge,
Lifting hook,

Weidemann pallet fork,
Weight: 188 kg,
Capacity: 2,500 kg,
Load center: 500 mm,
Fork carriage width: 1,100 mm,
Vetter fork tines,
Tine dimensions (LxWxH): 1,200 x 100 x 40 mm

Further information:
Overall length with standard bucket: approx. 6,100 mm,
Overall length with pallet fork: approx. 6,150 mm,
Overall length without attachment: approx. 4,870 mm,
Axle center to bucket pin: approx. 990 mm,
Wheelbase: approx. 2,150 mm,
Rear overhang: approx. 1,580 mm,
Height over cab: approx. 2,690 mm,
Seat height: approx. 1,620 mm,
Total operating height with standard bucket: approx. 4,410 mm,
Total operating height with pallet fork: approx. 4,170 mm,
Max. height to bucket pivot: approx. 3,690 mm,
Discharge height with standard bucket: approx. 3,380 mm,
Discharge height with pallet fork: approx. 3,460 mm,
Digging depth: approx. 74 mm,
Overall width: approx. 1,830 mm (without bucket),
Track width: approx. 1,422 mm,
Cab width: approx. 1,370 mm,
Ground clearance: approx. 380 mm,
Max. turning radius (depending on bucket width): approx. 4,050 mm,
Radius at outer edge: approx. 3,690 mm,
Inner turning radius: approx. 1,670 mm,
Articulation angle: approx. 45°,
Rollback angle at max. lift height: approx. 38°,
Max. dump angle: approx. 28°,
Rollback angle at ground level: approx. 46°,
Permissible axle load per axle: 4,500 kg,
Permissible payload with bucket: 1,515 kg,
Permissible load with pallet fork: 1,675 kg.

Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.