Vakuuma autocisterna

MAN TGS 26.440 6x2-4 BL CH - FFG elephant vacu

Chassis MAN TGS 26.440 6x2-4 BL CH EURO6e

Engine: MAN D2676 LFAZ, 324 kW, 2,250 Nm torque
Transmission: MAN TipMatic 12.26 DD
Wheelbase: 3,900mm; 1,350 mm between rear axle and trailing axle
MAN Efficient Roll
Trailing axle, non-driven, straight, steered, liftable
Differential lock on driven rear axle
Leaf/air suspension
NN cab, basic cab suspension with mechanical roof hatch
H7 front headlights
LED daytime running lights
Fog lamps, H7 cornering lights
High beam assistant, automatic driving light control
2x LED beacons
MAN OptiView mirror package, digital mirror replacement system
Driver comfort seat, air-sprung with seat heating
Passenger seat unsprung
Multifunction steering wheel
12.3-inch instrument cluster
Climatronic air conditioning
Auxiliary heater
ACC Stop & Go cruise control
MAN Professional Media System navigation 12.3-inch
MAN sound system
Trailer coupling (to be installed)

FFG elephant vacu 13.002 VSK suction vehicle

Tank
Material thickness: 6 mm
Total capacity: 13,000 l
Sludge chamber approx. 11,500 l - Water chamber approx. 1,500 l

Tank emptying
Free outflow from the rear-tilted body
Via hydraulic rear tilting, total tilt angle approx. 20 - 25°
Via hand valve and multi-stage hydraulic cylinder
With pressurization by vacuum pump
Suction-pressure pipes laid over tilting rotation point

Water chamber

* Filling
Filling line system in DN 50 with ball shut-off valve
Coupling connection - Storz C
Free-run device according to drinking water regulations
Overflow from hydrant filling led under the vehicle
Pneumatic shut-off flap to prevent splashing during driving
* Emptying
Cleaning/emptying connection DN 50 with shutoff fitting and Storz C coupling

Emptying flap
Top-hinged, externally reinforced full door, opening over entire tank cross-section at rear
Hydraulically opens upward, with hydraulic locking
Manual control valve for opening/closing within view

Suction and emptying nozzles
Located in upper and lower part of emptying flap, each DN 100 with manual ball valve
Sampling tap
Perrot coupling V-piece with dust cap

Sludge chamber fill control
Float indicator with additional rotary sensor for electronic measurement
Float located in center of tank for more accurate measurement when vehicle is tilted
Digital display at operator station in 100-liter increments

Vacuum pump
Hjdpsymudcjfx Aqpofn
Make: Gardner Denver Wittig RFW 200
Suction capacity: max 1,250 m³/h (free flow)
Drive power: approx. 45 kW
Pipework DN 100
Vacuum pump drive via PTO with cardan shafts and V-belt drive

Suction hose reel
Installed on tank lid, hydraulically driven with rotary union
Shut-off gate and rotary union in DN 100
Designed for 50 meters suction hose DN 80

High-pressure pump
Make: Speck Type P 45 - 75/180 G
Pump capacity approx. 75 l/min at 180 bar (nozzle pressure approx. 150 bar)
Drive power approx. 28 kW
Piping DN 13 including fittings

High-pressure hose reel
Fixed at rear, hydraulically operated
80 m DN 13
Spray gun lance 500 mm

Operator station integrated in equipment box
Radio remote control (compact version)
Equipment boxes
Hose trough
Rear vehicle camera
Hand wash station with heating
5x LED work lights
1 flashing beacon mounted at rear

We, the Lower Saxony Commercial Vehicle ...

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.