Atvērta puspiekabe ar tentu

KRONE MegaLiner*BPW*Edscha*hydr. Hubdach 450 mm

DUO-Matic pneumatic coupling
Fifth-wheel load: 12,000 kg
Axle load: 24,000 kg
Gross vehicle weight rating: 36,000 kg
Technically possible: Axle load: 27,000 kg
Gross vehicle weight rating: 39,000 kg
Unladen coupling height: 950 mm
Double-T longitudinal and central beam as well as external frame
Welded with cross members and outriggers
Multilock external frame with universal load securing options every 100 mm
Front construction height: 82 mm (incl. floor and fifth wheel plate)
2" kingpin (edge dimension: 2,040 mm)
Underrun protection according to EC with round tube, for RoRo transport
Side guard complying with EC Directive
Suitable for internal load length: 13,620 mm
Suitable for internal load width: 2,480 mm
Piggyback version consisting of 4 grab corners (color coded), rigid underrun protection with round tube
Fixed side underrun protection, right and left (not required to be foldable for rail use!)
10 pairs of stake pockets 81 x 81 mm in the outer frame, plus 10 stake pockets 81 x 81 mm centrally in the floor
The first two triple rows (neck area) have a stake pocket depth of only 68 - 85 mm (stake insertion depth is not sufficient for use, stakes may pop out during use!)
4 pairs of ship securing lugs in accordance with PREN 29367-2
Rear sliding step ladder
Stainless steel toolbox on the left
3 axles, each rated for 9,000 kg
Unit spacing = 7,650 mm
Track width: 1,965 mm
Wheelbase: 1,310 / 1,310 mm
BPW axle assembly with air suspension, total lift 200 mm
Brake drums: 360 x 200 mm (for 19.5" rim), BPW with lift and lowering device, 1 valve
BPW axle assembly with split air bellows and central tire alignment (wheels) 6-fold, 445/45 R 19.5
Type: BO 13620, 30 mm thick, water-resistant bonded panel floor, all cut edges sealed, strength according to DIN 283, rated for floor loads up to 7,000 kg forklift axle load
Canopy frame type: AB 13620 AGG, dimensions 13,620 mm internal length x width acc. to stakes
LM universal outer beams, continuous, for mounting sliding curtain and sliding rings
Bwedpfxsyra Rfe Abuei
Edscha sliding roof (175) with plastic joints, construction height 175 mm, slope 0 mm, designed for transport of mesh box pallets according to DIN 15155
Height internal lower edge of outer beam front: 2,860 mm
Height internal lower edge of outer beam rear: 2,860 mm
Internal height: 3,000 mm
Rear portal drive-through height: 2,845 mm
Unladen total vehicle height at highest point approx. 4,067 mm (at above-mentioned unladen coupling height)
The permitted total vehicle height of 4,000 mm is exceeded!
The permitted total vehicle height of 4,000 mm is exceeded!
A warning sticker "Take care high Trailer" (DIN A4) is to be affixed to the front wall.
Total vehicle height at the highest point with deflated air suspension max. 4,000 mm in pocket wagon operation.

ATTENTION:
Rail transport is only permissible with the side heights specified in the construction description, internal lower edge of outer beam front and rear! The central stakes must be adjusted accordingly! Only this transport position is permissible for rail transport! Please strictly observe!
Rail approval Code XL (for rail transport over 120 km/h up to 140 km/h)

Hydraulic lifting roof with 450 mm total lift, independently liftable at 4 corner stanchions
Front body height can be lowered by 120 mm from upper driving position (basic setting) (in one step), reduced roof lift: 330 mm
Rear body height can be lowered by 50 mm from upper driving position (basic setting) (in one step), reduced roof lift: 400 mm
Gr

Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.