Blender

MAN TGS 35.480 TGS 35.480 8x4 Euro6e EuromixMTP EM ...

- Heated mirrors
- Leaf spring suspension
- Brake booster
- Differential lock
- Speed limiter
- Air conditioning
- Air-suspended seats
- PTO (Power Take-Off)
- Sun visor

MAN TGS 35.480 BB 8x4 EURO 6e EuromixMTP EM 10 L

- NEW - without registration -

Vehicle Equipment:

Diesel engine MAN D2676 LFAY, 353 kW (480 HP) power, 2,450 Nm torque, Euro 6e
MAN TipMatic 12.28 OD - MAN TipMatic Efficiency drive program, up to 70,000 kg
Main wheelbase 3,205 mm
Wheelbase between front axles 1,795 mm
Wheelbase between rear axles 1,400 mm
Front axle tires: optional 385/65R22.5 steerable S+G TL (160 K)
Rear axle tires: optional 315/80R22.5 drive S+G TL (154/150 K)
Maximum vehicle noise level: 79 dB according to UN/ECE-R 51.03
400 l fuel tank (left), 35 l AdBlue tank (right)
Electronic braking system (EBS)
Anti-lock braking system (ABS)
Front axle: 9,200 kg, rear axle: 13,000 kg, AP axle
Axle ratio, i=3.63
Differential locks on driven rear axles
Suspension type: leaf/leaf (BB)
Sun visor, front windshield
2 work lights on cab roof, 1 right and 1 left
2 beacon lights on cab roof, 1 right and 1 left
Exterior mirrors electrically adjustable, heated
Driver comfort seat, air-suspended – passenger comfort seat, air-suspended
Multifunction steering wheel, height and tilt adjustable
Professional instrument cluster, 12.3-inch
MAN Mediasystem Professional navigation, 12.3-inch
Air conditioning, Climatronic
Additional water heater, 4 kW
Electronic Stability Program (ESP)
Traction control system (ASR)
Ncjdpfsytbt Dox An Nor
Cruise control (speed control FGR)
Trailer coupling


Mixer Equipment

Model: EM 10 L
Nominal capacity 10 m³ ready-mix concrete
Lightweight mixer drum construction
Mixer drum in lightweight design, made of HARDOX S450
Mixing spirals in lightweight design, made of HARDOX S500
Gearbox manufacturer: ZF - P5300
Hydraulic pump manufacturer: Bosch Rexroth
Hydraulic motor manufacturer: Bosch Rexroth
Integrated oil cooling system, manufacturer: ASA
Mechanical mixing control and start-stop electrically
Compressed air water system
Water connection at platform with hose line
Water filling line, one-sided with C-coupling
Mixer drum with service hatch
Climbing ladder with platform
Rubber attachment at the charging hopper
Pivoting, single-arm discharge chute made of steel
Wear plates in charging hopper, discharge chute and pivoting chute
Drum locking for securing the drum during maintenance
Polyurethane primer
Weight approx. 3,650kg, deviation +/- 5%
with emergency stop function according to EU safety standards
Aluminum fenders over the rear axles
2x extension chutes made of steel or plastic
Water system
Water tank 500l (compressed air)
Water tank steel
Shut-off valve beneath the water tank mounted on the fill line
Water connection “C”-coupling
Operations & electrics
Mixer operation – mechanical at rear
Start-stop system (with EDC)
Geometric volume 17,361 L
Water tank volume 11,121 L
Tank inclination 11.3°
Length 7,075 mm
Width 2,300 mm
Height 2,748 mm

Usable material: concrete
Front axle 1: Steered...

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.