Pašizgāzēja puspiekabe

FLIEGL DHKS 390 Thermo 27 m³

The images are archive photos // Multiple units available! // The vehicle is still in transit!

Chassis: Semi-trailer tipper
Basic lightweight design, fifth wheel plate with replaceable 2" kingpin
Curved front panel
Central telescopic support, uncoupling while loaded not possible
Foldable underrun protection
Half-shell mudguards
Tarp bar with holder
Tow hook at rear
Axles + Suspension
BPW disc brake axles with 430 mm disc diameter
Axle/chassis laser-aligned
1st axle automatic lift axle, additionally electrically controllable from the truck, including forced lowering and starting aid, no installation on truck required
Braking system
2-line compressed air brake system
Spring-loaded parking brake
2 mistake-proof coupling heads at the front, without connecting line
Redpjyu Rllofx Apdst
24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable
Automatic tipping lowering with shut-off valve
Trailer info module for displaying vehicle data such as axle loads (not a calibrated scale), mileage, and diagnostic/system messages.
Axle load detection via EBS CAN bus signal
Wheels and Tires
385/65 R22.5
Polished aluminum rims
Electrics
24 Volt, multi-chamber lights, side yellow LED lighting
2 white LED position lights at front
2 white/red lane control lights at rear
2x 7-pin and 1x 15-pin mistake-proof sockets at the front
Hydraulics
High-pressure cylinder max. 250 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, without hose connection
Body
Steel round body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic cylinder mounts
Interior with ladder on front wall
Shovel and broom holder outside on the front wall
Tailgate as a pendulum flap, externally mounted with double hook locking. 2 tension screws with toggle latches on the bottom sides.
Spacer for pendulum tailgate, can be hooked into tension screws
Side walls 4 mm throughout, floor 4/5 mm thick, wear- and weight-optimized construction
Fliegl S.T.E.P. – pivoting front catwalk with retractable access ladder on the left side for lateral access, only in combination with "Flip Top sliding cover"
Body in insulated version, Fliegl Asphalt Profi Thermo, insulated at front, sides, bottom, and rear with Fliegl Isotherm panel cover,
"Flip Top sliding cover," automatic rear lock with folding bows. Cover deploys forward. Electrically operated cover, with 7-pin socket (charging socket at front without connecting cable, including loose tractor socket, no installation on truck, control on trailer and via radio remote control)
7-pin connecting cable to truck as spiral cable for sliding cover, socket must be available on the truck
Operation Notes
For transports of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent corrosion from aggressive materials.
The stated gross weight is technically possible; depending on cargo, the gross weight may not be reached due to legal axle/support/fifth wheel load limits. Note: Not suitable for chemically aggressive media (e.g. acids, chlorine compounds, sulfur compounds, substitute fuels). Vehicles with loading bodies are intended for non-chemically aggressive loads.
Paint finish
Frame: DB 7350 Novagrau
Support legs: galvanized
Body: RAL 5002 ultramarine blue
Roll tarp: RAL 5002 ultramarine blue

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.