Pašizgāzēja puspiekabe

FLIEGL DHKS-420 Thermo Basic plus

The images shown are archive photos; the vehicle may still be in use!

Approx. fifth wheel height: 1200 mm

Chassis: Semi-trailer tipper
Basic lightweight construction, kingpin plate with interchangeable 2" kingpin, patented curved front bulkhead
Folding underrun protection, underrun protection with spring assistance for easier handling
Integrated mudguard bracket with stone-repellent surface

Axles & Suspension:
SAF disc brake axles with 430 mm disc diameter; axles/chassis laser-aligned to reduce tire wear and fuel consumption
Air suspension
1st axle with automatic lift axle including forced lowering and starting aid, activation by "3x braking" (starting aid is functional up to a 30% axle overload and up to a maximum speed of 25 km/h)

Braking system:
24 Volt EBS electronic braking system with EBS socket at the front (no connection cable), test port for brake cylinder pressure routed to the outside of the EBS module, with raise & lower valve
Paver brake, electrically operated from the truck without truck installation, automatic tipper lowering with shut-off valve
"TPMS" tire pressure monitoring system as per ECE R141, display via monitor in towing vehicle through EBS (requires appropriate truck setup; only for standard tires)
Axle load detection via EBS-CAN bus signal for display in the cab; truck must be preconfigured, no truck installation

Wheels and Tires:
385/65 R22.5 steel rims

Electrics:
Side-mounted yellow LED lights synchronised with indicators (flashing side lights)
2 white front position LED lights
2 white/red rear marker LED lights
LED work lights on both sides; 2 additional work lights integrated into the rear

Hydraulics:
Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection)
Operation hydraulically via truck PTO (power take-off)

Body/Tub:
Steel round body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mount.
Internal ladder at the front bulkhead
Greenline - conical and aerodynamic body shape
“Membrane” tailgate
Tailgate as hydraulic rear door opening upwards; clearance approx. 2,200 mm
Side walls continuously 5 mm thick, base continuously 8 mm thick
Body is insulated version, Fliegl Asphalt Profi Thermo, body insulated at the front, sides, bottom, and rear with Fliegl Isotherm
Hedpfx Agsyylapefsk
"Flip Top sliding cover", automatic rear lock as folding hoop. Cover built to front. Electrically operated cover with 7-pin plug (charging plug) at front, no connection cable, no truck installation; operation on trailer and via remote control.

Operational notes:
For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent damage and corrosion from the material.
The specified gross weight is technically possible, but depending on the load, the gross weight may not be achievable while observing permissible axle, support, and coupling loads. (Improper load distribution may lead to poor driving and tracking performance)

Paintwork:
Frame: DB 7350 Nova Grey
"10 years warranty against corrosion"
Support legs: black coated
Body: RAL 1007 Narcissus Yellow
Roll tarp: RAL 7038 Agate Grey

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.