Zema grīdas puspiekabe būvniecības tehnikas pārvadāšanai

Faymonville MAX Trailer 3-A-Tele-Semi-Radmul.-Rampen

For every used trailer, you will receive a current and complete inspection and functionality report.

Gooseneck:
- Gooseneck with rear bevel of approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- Hardwood flooring 30 mm thick

Extendable loading area:
- Telescopic loading area with rear bevel approx. 1,000 mm x 8°
- 1 pair of built-in wheel recesses in front of the axles (approx. 2,850 x 970 x 400 mm)
- Wheel recesses with 15 x 15 mm square climbing bars and lower-area widenings
- Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm
- Incl. 3-piece removable galvanized covers over the wheel recesses (width 670 mm) – max. point load 5 t each
- Recess in the bevel, extending into the platform, for excavator dipper stick approx. 2,900 x 750 x 210/290 mm
- 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN)
- 5 pairs of outward folding lashing rings (LC 5,000 daN)
- 2 pairs of outward folding lashing rings (LC 10,000 daN)
- 2 pairs of lashing rings in the excavator dipper recess (LC 5,000 daN)
- Cutouts in the outer frame for attachment of tensioning straps (LC 2,000 daN)

Ramps:
- One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering
- Ramps with hydraulically foldable ramp sections, hydraulic lifting mechanism, and hydraulically adjustable
Iedpoyylduefx Ai Teat
- Maximum load per pair: 40,000 kg

Axles and Tyres:
- BPW axles and suspension, 2 axles fixed, 1 trailing axle
- Technical axle load: 12,000 kg
- Electromagnetic reversing lock, activated by reversing gear and manually
- Air suspension with raise/lowering valve
- Axle tools
- TPMS tyre pressure monitoring system according to ECE R 141
- Tyres 235/75 R17.5 3PMSF

Accessories included:
- Bracket for warning signs on the gooseneck and rear left and right, with socket
- 1 spare wheel with holder in front of the front wall
- 2" king pin
- One galvanized steel front wall approx. 400 mm high
- Yellow-red air couplings on the galvanized connector strip at the front
- 4 wheel chocks with holders
- Galvanized extendable widenings approx. 230 mm per side
- Galvanized folding supports under the rear bevel of the loading area
- Cover plates for bridging the gap between ramps and loading area
- White reflective tape to EU regulations on sides and extension, red on rear
- Electro-hydraulic unit at the rear, under the loading area
- European reflective signs (red-yellow) at rear of trailer
- Four warning signs extendable by around 400 mm, approx. 423 x 423 mm with position light
- Bracket for rotating beacon on warning signs
- Plug-in ALU side and rear panels on the gooseneck, approx. 2,440 x 400 mm
- Removable galvanized rear stanchions (body length approx. 2,560 mm)
- 2 pairs of WADER container pockets in the loading area for 20ft or 30ft containers
- 3 pairs of stanchion sockets (100 x 50 mm) in the outer frame of the loading area
- Removable galvanized intermediate table with 1 pair of WADER container pockets
- 20 x 20 mm square climbing bars every 200 mm on the outer frame of the loading area’s rear bevel
- Anti-slip sand coating applied to checker plates on the gooseneck and loading area
- 80 km/h speed stickers on rear and both sides
- Load pressure gauge for determining axle loads, including load chart

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.