Vircas tehnoloģija

Wienhoff 22.800 T PTW PROFI LINE

22,800 T PTW PROFI LINE
(0010) Used Wienhoff slurry tanker
(0020) Safety valve
(0030) Simple tank ventilation and aeration with
(0040) galvanized 6" pipe routed through the tank
(0050) Second tank ventilation and aeration at the rear
(0060) for FV (only with Can-Bus)
(0070) with galvanized 6" pipe routed through the tank
(0080) Level indicator, float diameter
(0090) ... mm, located at the front of the tank for Can-Bus
(0100) 8" suction connection reduced to 6" with hydraulic
(0110) valve and quick coupler at the front left
(0120) 6" mechanical valve with quick coupler
(0130) direct from the tank for suction
(0140) Position: where space is available
(0150) 6" hydraulic valve at the rear with T-piece
(0160) (Preparation for splash plate/broad distributor)
(0170) - mechanical
(0180) - electric
(0190) - hydraulic
(0210) Dome 0 as service opening with handwheel
(0220) Low center of gravity: axles located above
(0230) springs, wheel wells across both axles
(0240) Effective volume: approx. 21,000 liters
(0250) 14-tonne Gigant air suspension, tandem,
(0260) forced steering with cable, 150 BPW axles,
(0270) Track width: 2225mm, RDR Prep. AgroTurn
(0280) Wienhoff LevelTuner for tandem:
(0290) - automatic adjustment of air suspension pressure
(0300) to the load distribution
(0310) - Roll Stability Program (RSP)
(0340) It is assumed that the tractor
(0350) is equipped with a suitable air dryer.
(0360) Otherwise, damage to the braking system cannot be ruled out.
(0380) Wheels: 900/60 R 42 BKT Agrimax Force
(0390) ET, tapered frame design,
(0410) Special frame build, for tire width over 800 mm
(0420) - with air suspension, 2 x 900mm axle mounts
(0430) including 900/60 R42 BKT
(0440) Hydro-pneumatically suspended lower linkage,
K80 with hydraulic support leg
(0460) K80 with large flange (4t)
(0470) 2-line pneumatic brake system with ALB
(0480) ... km/h equipment, with galvanized mudguards
(0490) - with round steel edge
... km/h TÜV certificate
(0510) - Warning panels and marker lights
(0520) - underride protection with truck lighting
(0530) - complete LED lighting
(0540) LED work lights at the front
(0550) Position:
(0560) - 1x front left side on the tank
(0570) - 1x front right side on the tank
(0580) Via WieTaCon/otherwise via switch
(0590) LED rotating beacon
(0600) Complete lighting in LED
(0610) - lights in underride guard
(0620) - outline marker lights on underride guard
(0630) - active side marker lights
(0640) left/right
(0650) LED work lights at the rear
(0660) Position:
(0670) - 1x rear left side on the tank
(0680) - 1x rear right side on the tank
(0690) Via WieTaCon/otherwise via switch
(0700) LED work light for docking arm
(0710) Via WieTaCon/otherwise via switch
(0720) Vogelsang RotoCut RCX 58-H
(0730) Cutting unit + auto. adjustment
(0740) mounted on large stone trap box
(0750) to item 001.07" mechanical valve under RotoCut
(0770) Vogelsang rotary lobe pump VX 186/390Q
... L/min Injection System with
Lodoy Et Rajpfx An Nohf
(0790) Hydraulic drive
(0800) Hydraulically controlled rotary lobe pump via
... rpm
(0820) Gearbox
(0830) Hydrostatic pump
(0840) Regulated oil cooler incl. dual-sided
(0850) 011.08.0070_Oil cooler cover
(0860) 80-liter oil tank
(0870) PTO shaft Bondioli Pavesi BG9
(0880) Pump painted in tank color
(0890) for item 001.08 pump mounted on the side
(0910) Monitoring unit (pressure side)
(0920) Pressure gauge on the pressure side with
(0930) diaphragm gauge
(0940) Monitoring unit (suction side)
(0950) Vaccum gauge

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.