Atvērtā puspiekabe

Fliegl 3-Achs Jumbo Sattelauflieger Plateau

Chassis, Semi-trailer, Logistics
Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin
Outer frame slightly angled, new design with "Load-Lock profile" for securing lashing straps
24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without lateral support
Free support leg angle or free swivel radius to the rear, approx. 1920 mm
2 support wedges with holder
Aluminum side impact protection
Steel underrun protection
Partial wheel covers in front of and behind each axle
Splash flaps in front of the 1st axle and behind each axle with anti-splash protection, according to EC regulations
1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included)
Axles + Suspension
SAF drum brake axles
"Axle/chassis laser-aligned" to reduce tire wear and fuel consumption
Air suspension
1st axle: automatic lift axle, including forced lowering and starting assist function, activated by "3x braking" (starting assist function is operational up to an axle load exceeding 30% and up to a speed of max. 25 km/h)
Axle lift below the recommended ride height, therefore no guarantee for tire damage
Braking System
2-line compressed air brake system
Color-coded line routing for easy maintenance
Spring brake parking brake
2 non-interchangeable coupling heads at the front, without connecting cable
EBS, electronic brake system with EBS socket at the front, without connecting cable
Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS!
With raising and lowering valve
Vehicle - Driving Stability System
Wheels and Tires
235/75 R17.5, brand according to the manufacturer's choice
Steel rims, factory silver
Electrical System
24 Volt, multi-chamber lights, yellow LED lighting on the sides
2 white position lights at the front
2 white/red outline lights at the rear
2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable
Floor
Sieve-printed panels, approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5,600 kg
Front wall / corner posts
25 mm aluminum hollow profile, 1,350 mm high, corner posts made of steel in a full-volume design
Country of Approval / Signage
Bdodpfxjza A Txj Apbsc
Germany
With DEKRA inspection and certificate (according to §13 EC - FGV)
24/7 service hotline
Prepared for single-row license plate holder
Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear
Paint
Frame DB 7350 Novagrau
Front corner posts: hot-dip galvanized
Front wall: aluminum

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.