Silo puspieka

SPITZER SK 2760 CAL*Silo-KippSAH*60m³*ALCOA*2xLiftA

Tank
Tank material: AlMg 4.5 Mn, design, manufacturing, and acceptance according to the applicable pressure vessel regulations.
Filling openings with stainless steel flange connections, flush on the inside, quantity: 5, Ø 450 mm, incl. rubber pads.
Ladder, walking platform, and folding railing on the left, pneumatically operated from below, folding railing mounted in Teflon bushings,
ladder and folding railing anodized, all elements made of non-corrosive materials.
CPO discharge outlet DN 800/150, aluminum anodized, with stainless steel ring nozzle for loosening material, foldable/swiveling.
Shut-off valve with DN 150, Storz A connection.

Air distribution system
Air line pipe 2" on the right, made of polished stainless steel.
Air distributor pipe 4", prepared for filter insert and second safety valve.
Air supply, auxiliary air, and loosening air can be controlled via air shut-off valves in a full stainless steel design with silicone seal.
Compressor air connection via hose DN 65 Storz B, with hose box.
Air supply and air connection hoses from the air distributor pipe to the loosening air and auxiliary air,
removable with Storz C coupling.
Air connection hose DN 65 between the air line pipe and the air distributor pipe, removable with Storz B coupling.

Axle assembly, braking system
Air suspension incl. raising/lowering device and stroke limitation.
Axle assembly BPW Airlight Plus ET 120, spring-loaded parking brake, ABS with electronic control (EBS) in 2S/2M configuration (legal requirement 2S/1M) and electronic stability program (RSS), disc brake, Ø 370 mm.
Brake design: Axle assembly 27.00 tons, saddle load 13.00 tons.

Tires
6 aluminum rims, Alcoa dura bright, bolt hole Ø 26 mm, ET 120.
6 tires 385/65 R 22.5
Tread depths:
8/9 mm
13/8 mm
13/12 mm

Equipment
Rear underrun protection
Side protection device
Outrigger, aluminum, with C-foot as a plug connection, without gearbox
Loading pressure gauge connected to the air suspension system.
Without spare wheel holder.
Grounding cable between chassis and tank.

Iedpfx Alozdx A Ao Ueth
Tilting device
Tilting cylinder, approx. 45° tilting angle, all stages hard-chrome plated, tank connection in patented design.
Hydraulic connections in front of the saddle coupling, pressure-right-1/2" (15 L), return-left-3/4" (22 L),
(hydraulic couplings Hansaflex), incl. swiveling stainless steel bracket.
Design according to the European Machinery Directive.
Support at the end of the frame, mechanical.

Additional equipment
1 loading nozzle DN 100 with Storz A safety coupling, mounted on the front left.
1 vibrator, manufacturer Webac VR 78, mounted on the rear of the tank, operation on the rear right.
Exhaust hose from the tank vent valve 2" leads downwards, with tapered silencer 2",
aluminum.
1 check valve as a vacuum valve 2" installed on the air supply line,
with rain cover, TW 50 removable.
Stainless steel valve 2" for tank venting mounted on the walkway, with extended handle,
TW 50 intermediate coupling.
2x axle lift, fully automatic for axles A and C, starting aid with button from the
SZM (PIN 12) and via brake pedal actuation, wiring for 2 switches to separately switch off the
lift axle function (PIN 11 + 14).
2 x 5 m delivery hoses DN 80, Storz B coupling, for construction materials.
2 x 5 m delivery hoses DN 100, Storz A coupling, for construction materials.
1 discharge chute, stainless steel - electropolished, guided over the bumper in the discharge area.
Railing protection for the pneumatic folding railing
by actuating

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.