Cits

HOLDER M 480 FH / HH & FZ Leistungshydraulik Klima

Holder M 480 / C 480 4x4, one owner, used primarily by a municipality with limited winter service.

3-point front hydraulics with level adjustment, side shift, and rotating front PTO shaft 1000 rpm. Rear hydraulics with 3-point linkage, aluminum flatbed with hydraulic tipping, trailer hitch, and work hydraulics.
Additional performance hydraulics with a variable displacement pump for mounting front or rear implements with high oil requirements. Circuit 1 and 2 are continuously adjustable. Circuit 1: 0-40 l/min, Circuit 2: 0 to 75 l/min at 200 bar.
4 driving modes: Fast (up to 40 km/h), Slow (up to 20 km/h), PTO, and manual driving.
Deutz 4-cylinder turbo diesel engine, 2.7 L displacement, hydrostatic drive by Rexroth, with 4 wheel motors.
Tires are approximately 90% good, wide tires with deep tread, air conditioning.
Vehicle has been regularly maintained, last maintenance at 3000 operating hours. Service book with all entries available, vehicle documentation included.
Vehicle is in good condition, almost rust-free, with limited winter service.
4 double-acting control valves, leak-off line, pressure relief, work lights front and rear.
Empty weight approx. 2250 kg, maximum speed 40 km/h, filled with biodegradable hydraulic oil.
One owner.
Maintenance has always been performed regularly with documented proof.
Articulated joint newly fitted with bearings.
Both steering cylinders renewed.
Hjdezlb Siepfx Ag Asnp
2 wheel motors renewed. Biodegradable hydraulic oil renewed.
Last maintenance at 3000 operating hours in March 2025.

Maintenance performed:

July 2013 at 60 operating hours.
January 2014 at 225 operating hours.
March 2015 at 500 operating hours.
October 2016 at 900 operating hours.
July 2017 at 922 operating hours.
November 2018 at 1330 operating hours.
April 2019 at 1565 operating hours.
March 2021 at 2000 operating hours.
March 2022 at 2300 operating hours.
April 2023 at 2751 operating hours, including timing belt replacement, oil pump and turbocharger renewed, control piston for oil heater renewed.
April 2024 at 2785 operating hours.
March 2025 at 3000 operating hours, both steering cylinders renewed, bearings for articulated joint renewed.

VAT can be shown separately (19%).

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.