Specializēta / izstāžu virsbūveRenault
Master STX
Specializēta / izstāžu virsbūve
Renault
Master STX
Fiksēta cena plus PVN
56 350 €
(69 310 € bruto)
Ražošanas gads
2024
Stāvoklis
izstādes iekārta
(pilnībā funkcionāls)
Atrašanās vieta
Warszawa 

Pamatdati
- Apzīmējums:
- Specializēta / izstāžu virsbūve
- Ražotājs:
- Renault
- Modelis:
- Master STX
- Transportlīdzekļa numurs:
- VF6VF000871344886
- Ražošanas gads:
- 2024
- Stāvoklis:
- teju kā jauns (izstādes iekārta)
- Funkcionalitāte:
- pilnībā funkcionāls
Cena un atrašanās vieta
Fiksēta cena plus PVN
56 350 €
(69 310 € bruto)
- noma:
- iespējams
- Atrašanās vieta:
- Warszawa, Polija

Zvanīt
Tehniskā informācija
- Nobraukums:
- 20 955 km
- Pirmā reģistrācija:
- 04/2024
- Degvielas veids:
- dīzeļdegviela
- Tukšais svars:
- 2 967 kg
- Maksimālā kravnesība:
- 523 kg
- Kopējais svars:
- 3 500 kg
- Riepas izmērs:
- 16
- Riepu stāvoklis:
- 75 procenti
- Asu konfigurācija:
- 2 asis
- Riteņu bāze:
- 4 332 mm
- Degviela:
- dīzeļdegviela
- Degvielas tvertnes tilpums:
- 105 l
- Krāsa:
- zils
- Vadītāja kabīne:
- dienas kabīne
- Pārnesuma veids:
- cits
- Pārnesumu skaits:
- 6
- Piekares sistēma:
- gaiss
- Sēdvietu skaits:
- 3
- Kopējais garums:
- 5 400 mm
- Kopējais platums:
- 225 mm
- Kopējais augstums:
- 3 100 mm
- Atļautā ass slodze (1. ass):
- 1 850 kg
- Atļautā ass slodze (ass 2):
- 2 100 kg
- Krautuves garums:
- 4 200 mm
- Iekraušanas vietas platums:
- 200 mm
- Iekraušanas telpas augstums:
- 250 mm
- Aprīkojums:
- ABS, AdBlue, Bluetooth, EBS (Elektroniskā bremžu sistēma), USB ports, gaisa kondicionēšana, gaisa spilvens, automobiļa reģistrācija, centrālā atslēga, kompresors, kruīza kontrole, elektriskais logu regulators, elektroniskā stabilitātes programma (ESP), miglas lukturi, nesmēķētāju transportlīdzeklis, borta dators, stūres pastiprinātājs, saules elektrostacija, start-stop sistēma, vilces kontroles sistēma
Piedāvājuma informācija
- Sludinājuma ID:
- A223-83-277
- Atsauces numurs:
- W1MENLO
- Atjaunināšana:
- pēdējo reizi 21.07.2026
Apraksts
Specialized / exhibition conversion.
Vehicle intended for demonstrations, exhibitions, etc.
Vehicle ready for use, fully functional, and equipped.
Additional information:
Gbedpfsznczqsx Ab Aet
CONSTRUCTION AND DIMENSIONS
Aluminum frame, welded. Cladding made of insulated panels integrated with the driver's cabin. Wall and roof thickness (reinforced for mounting 5 photovoltaic panels) adapted to the loads being carried.
Internal length 4200 mm, width of the central section.
FLOOR
Floor made of honeycomb structure panels, glued and screwed to the frame lattice. The floor has flush-mounted sleeves that allow for screwing in eye-bolt load securing points (minimum 8 pieces). Non-extendable in the center.
LEFT WALL
Left wall of the conversion with reinforcements for mounting display equipment (three PSM system rails mounted to the wall, allowing equipment to be mounted anywhere). Rails are offset from the wall on profiles with drilled holes.
RIGHT WALL
Fold-out right side of the conversion:
- opening side panel creating a platform and a canopy above the platform,
- raising the panel assisted by gas struts,
- opening platform supported by three adjustable legs,
- railings in the fold-out section.
FRONT WALL
A wall set at an angle is mounted against the front wall, reinforced for mounting display equipment, with a cutout for display equipment.
REAR WALL
Rear single-leaf door on the axis of the conversion. Left-hand hinges. A retractable aluminum step is mounted under the door. A storage cabinet is mounted on the right side of the door (at the bottom - a waste bin, above - a shelf for coffee and cups, a built-in automatic coffee machine).
ELECTRICAL INSTALLATION
External 230V power socket with internal wiring and power cable. Number and location of 230V sockets to be determined. Internal LED lighting (along the entire ceiling, above the sink, on the right side behind the rear door).
Additional options:
- pneumatic suspension with compressor and pressure gauges for the suspension
- rear spoiler with fairings
- reversing camera
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Vehicle intended for demonstrations, exhibitions, etc.
Vehicle ready for use, fully functional, and equipped.
Additional information:
Gbedpfsznczqsx Ab Aet
CONSTRUCTION AND DIMENSIONS
Aluminum frame, welded. Cladding made of insulated panels integrated with the driver's cabin. Wall and roof thickness (reinforced for mounting 5 photovoltaic panels) adapted to the loads being carried.
Internal length 4200 mm, width of the central section.
FLOOR
Floor made of honeycomb structure panels, glued and screwed to the frame lattice. The floor has flush-mounted sleeves that allow for screwing in eye-bolt load securing points (minimum 8 pieces). Non-extendable in the center.
LEFT WALL
Left wall of the conversion with reinforcements for mounting display equipment (three PSM system rails mounted to the wall, allowing equipment to be mounted anywhere). Rails are offset from the wall on profiles with drilled holes.
RIGHT WALL
Fold-out right side of the conversion:
- opening side panel creating a platform and a canopy above the platform,
- raising the panel assisted by gas struts,
- opening platform supported by three adjustable legs,
- railings in the fold-out section.
FRONT WALL
A wall set at an angle is mounted against the front wall, reinforced for mounting display equipment, with a cutout for display equipment.
REAR WALL
Rear single-leaf door on the axis of the conversion. Left-hand hinges. A retractable aluminum step is mounted under the door. A storage cabinet is mounted on the right side of the door (at the bottom - a waste bin, above - a shelf for coffee and cups, a built-in automatic coffee machine).
ELECTRICAL INSTALLATION
External 230V power socket with internal wiring and power cable. Number and location of 230V sockets to be determined. Internal LED lighting (along the entire ceiling, above the sink, on the right side behind the rear door).
Additional options:
- pneumatic suspension with compressor and pressure gauges for the suspension
- rear spoiler with fairings
- reversing camera
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2026
1 Sludinājums tiešsaistē
Nosūtīt pieprasījumu
Tālrunis & Fakss
+48 502 1... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Scherpenzeel
1 342 km
Zirgu transports
RenaultMaster E-Tech STX S3 nieuw paardenwagen elektri...
RenaultMaster E-Tech STX S3 nieuw paardenwagen elektri...
Mazā sludinājuma
Büyükkayacık OSB
2 185 km
Zems iekrāvējs
GVN Trailer2 Axle Hydraulic Platform Lowloader
GVN Trailer2 Axle Hydraulic Platform Lowloader
Mazā sludinājuma
Scherpenzeel
1 342 km
Zirgu transports
RenaultMaster STX S3 Automaat nieuw model paardenwagen...
RenaultMaster STX S3 Automaat nieuw model paardenwagen...
Mazā sludinājuma
Wernhout
1 427 km
Zirgu transports
RenaultMaster | HORSETRUCK | STX | STALLION 5XL | 2018...
RenaultMaster | HORSETRUCK | STX | STALLION 5XL | 2018...
Mazā sludinājuma
Hlavní město Praha
1 009 km
Automašīna-māja, ekspedīcija
IVECOEUROCARGO 4x4
IVECOEUROCARGO 4x4
Mazā sludinājuma
Leezen
966 km
Lopbarības pārvadātājs
RENAULTMaster STX 5 Sitzer Haras ex. Lang Automatik
RENAULTMaster STX 5 Sitzer Haras ex. Lang Automatik
Mazā sludinājuma
Leezen
966 km
Lopbarības pārvadātājs
RENAULTMaster STX 5 Sitzer Haras ex. Lang Automatik
RENAULTMaster STX 5 Sitzer Haras ex. Lang Automatik
Mazā sludinājuma
Léglantiers
1 675 km
Treneris
irizari6s
irizari6s
Mazā sludinājuma
Leezen
966 km
Lopbarības pārvadātājs
RENAULTMaster STX 5 Sitzer Haras ex. Lang Automatik
RENAULTMaster STX 5 Sitzer Haras ex. Lang Automatik
Mazā sludinājuma
Leezen
966 km
Lopbarības pārvadātājs
RENAULTMaster STX Haras AUTOM. NEW MODEL
RENAULTMaster STX Haras AUTOM. NEW MODEL
Mazā sludinājuma
Hlavní město Praha
1 009 km
Automašīna-māja, ekspedīcija
IVECOEUROCARGO 4x4, 110/280
IVECOEUROCARGO 4x4, 110/280
Mazā sludinājuma
Lienden
1 347 km
Zirgu transports
RenaultMaster STX S3 Paardenwagen Hengsten uitvoering ...
RenaultMaster STX S3 Paardenwagen Hengsten uitvoering ...
Mazā sludinājuma
Wernhout
1 427 km
Zirgu transports
RenaultMaster | HORSETRUCK | STX | STALLION 3XL | 2024...
RenaultMaster | HORSETRUCK | STX | STALLION 3XL | 2024...
Mazā sludinājuma
Toulouse
2 190 km
Pārveidots kravas auto (kemperis)
Mazā sludinājuma
Leezen
966 km
Lopbarības pārvadātājs
RENAULTMaster STX 5 Sitzer Haras ex. Lang Automatik
RENAULTMaster STX 5 Sitzer Haras ex. Lang Automatik
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda








































































































































































































































































































