Zemās grīdas puspiekabe ar rampāmMeusburger
MTS-3 hydr.klapp-Rampen Hebebett Lenkach
Zemās grīdas puspiekabe ar rampām
Meusburger
MTS-3 hydr.klapp-Rampen Hebebett Lenkach
EXW Fiksēta cena plus PVN
54 500 €
(64 855 € bruto)
Ražošanas gads
2019
Stāvoklis
Lietots
(pilnībā funkcionāls)
Atrašanās vieta
Sindelfingen 

Pamatdati
- Apzīmējums:
- Zemās grīdas puspiekabe ar rampām
- Ražotājs:
- Meusburger
- Ražošanas gads:
- 2019
- Stāvoklis:
- ļoti labs (lietots)
- Funkcionalitāte:
- pilnībā funkcionāls
Cena un atrašanās vieta
EXW Fiksēta cena plus PVN
54 500 €
(64 855 € bruto)
- Atrašanās vieta:
- Kolumbusstraße 9, 71063 Sindelfingen, Deutschland

Zvanīt
Tehniskā informācija
Izmēri un svars
Kopējais svars:
48 000 kg
Tukšais svars:
11 700 kg
Maksimālā kravnesība:
33 300 kg
Kopējais garums:
13 980 mm
Kopējais platums:
2 550 mm
Kopējais augstums:
3 630 mm
Dzinējs un pārnesumkārba
Maksimālais ātrums:
90 km/h
Asis un riteņi
Asu konfigurācija:
3 asis
Piekares sistēma:
gaiss
Riepas izmērs:
235/75R17,5
Riteņu bāze:
1 310 mm
Atļautā ass slodze (1. ass):
10 000 kg
Atļautā ass slodze (ass 2):
10 000 kg
Atļautā assu slodze (ass 3):
10 000 kg
Bremzes
Piekabes bremze:
bremzēta piekabe
Drošības funkcijas
ABS
Sīkāka informācija
Pirmā reģistrācija:
07/2019
Krāsa:
oranžs
Piedāvājuma informācija
- Sludinājuma ID:
- A226-03-787
- Atjaunināšana:
- pēdējo reizi 23.08.2026
Apraksts
MEUSBURGER MTS-3
Dwjdpjzv Iansfx Ab Sec
Low loader trailer, single owner, workshop maintained, and in very good condition!
New TÜV inspection,
3x BPW ECO axles with air suspension,
1 axle can be lifted,
3rd axle as a friction-guided trailing axle with electric and mechanical lock. Steering of the 3rd axle via two hydraulic cylinders to enable maneuvering using a remote control,
Total weight (2-axle configuration) 48,000 kg,
Total weight (3-axle configuration) 57,000 kg,
Payload (2-axle configuration) 28,500 kg,
Payload (3-axle configuration) 36,000 kg
Fifth wheel load 18,000 kg,
Rear axle load 30,000 kg,
Unladen weight 11,700 kg,
Overall width 2,550 mm,
Length of gooseneck platform approx. 3,950 mm, front bevel approx. 500x56 mm,
Length of low-bed platform approx. 9,750 mm, rear bevel approx. 1,000x100 mm,
Loading height approx. 920 mm,
Fifth wheel coupling height approx. 1,150 mm,
Front outrigger supports,
Hydraulic rear supports powered by an electro-hydraulic unit for the ramps,
Distance between supports 1,310 / 1,410 mm,
Central grease lubrication system with electric pump,
LED work lights,
Floor: Pressed grating 30/30/5 mm (hot-dip galvanized) over the entire loading area in the low bed, ramps, and on the upper platform,
Ramps: 2-part ramps in special design with mechanical extension, length approx. 2,850 + 1,850 mm, with a maximum slope of 8°. Ramp width approx. 800 mm, can be slid together in the middle to approx. 50 mm. Hydraulically adjustable laterally to an overall width of 2,750 mm. Load capacity 25 tons. Ramp operation via hydraulic pump unit. Power supply via NATO socket,
Hydraulically liftable ramp on the gooseneck, approx. 3,450 mm long for accessing the upper bed over the entire vehicle width, with a load capacity of 10 tons,
4x PVC toolboxes 600/450/400 mm,
Electric winch RUNVA 24 Volt, 8.0 tons pulling force, with steel cable 25m x 12 mm, with hook, incl. cable guide window and remote control,
Total of 64 heavy-duty lashing rings (8 tons),
Paint: RAL 2002 blood orange,
Tires 235/75R17.5 13/13/13/13 mm 9/6/9/9 mm 10/10/10/10 mm,
Upon request, leasing/financing options are available - quick processing, even without a down payment! More information and requirements on request.
The vehicle description is for general identification of the vehicle only. The information, images and descriptions are without guarantee! Equipment must be checked separately if necessary. The seller assumes no liability for any typing and data transmission errors. Errors and prior sale are reserved.
Thank you for your interest! We look forward to your visit.
Our SERVICE:
We will gladly accept your used vehicle in part exchange,
Customs license plates for 30 days including insurance,
EUR-1 + all customs documents for export,
TÜV / SP / UVV / Tachograph inspection / OBU installation,
Professional transport to the customer,
Transfer from Stuttgart Airport / Sindelfingen train station to our location by arrangement,
Retrofitting of additional attachments and other individual customer requirements possible by arrangement.
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Dwjdpjzv Iansfx Ab Sec
Low loader trailer, single owner, workshop maintained, and in very good condition!
New TÜV inspection,
3x BPW ECO axles with air suspension,
1 axle can be lifted,
3rd axle as a friction-guided trailing axle with electric and mechanical lock. Steering of the 3rd axle via two hydraulic cylinders to enable maneuvering using a remote control,
Total weight (2-axle configuration) 48,000 kg,
Total weight (3-axle configuration) 57,000 kg,
Payload (2-axle configuration) 28,500 kg,
Payload (3-axle configuration) 36,000 kg
Fifth wheel load 18,000 kg,
Rear axle load 30,000 kg,
Unladen weight 11,700 kg,
Overall width 2,550 mm,
Length of gooseneck platform approx. 3,950 mm, front bevel approx. 500x56 mm,
Length of low-bed platform approx. 9,750 mm, rear bevel approx. 1,000x100 mm,
Loading height approx. 920 mm,
Fifth wheel coupling height approx. 1,150 mm,
Front outrigger supports,
Hydraulic rear supports powered by an electro-hydraulic unit for the ramps,
Distance between supports 1,310 / 1,410 mm,
Central grease lubrication system with electric pump,
LED work lights,
Floor: Pressed grating 30/30/5 mm (hot-dip galvanized) over the entire loading area in the low bed, ramps, and on the upper platform,
Ramps: 2-part ramps in special design with mechanical extension, length approx. 2,850 + 1,850 mm, with a maximum slope of 8°. Ramp width approx. 800 mm, can be slid together in the middle to approx. 50 mm. Hydraulically adjustable laterally to an overall width of 2,750 mm. Load capacity 25 tons. Ramp operation via hydraulic pump unit. Power supply via NATO socket,
Hydraulically liftable ramp on the gooseneck, approx. 3,450 mm long for accessing the upper bed over the entire vehicle width, with a load capacity of 10 tons,
4x PVC toolboxes 600/450/400 mm,
Electric winch RUNVA 24 Volt, 8.0 tons pulling force, with steel cable 25m x 12 mm, with hook, incl. cable guide window and remote control,
Total of 64 heavy-duty lashing rings (8 tons),
Paint: RAL 2002 blood orange,
Tires 235/75R17.5 13/13/13/13 mm 9/6/9/9 mm 10/10/10/10 mm,
Upon request, leasing/financing options are available - quick processing, even without a down payment! More information and requirements on request.
The vehicle description is for general identification of the vehicle only. The information, images and descriptions are without guarantee! Equipment must be checked separately if necessary. The seller assumes no liability for any typing and data transmission errors. Errors and prior sale are reserved.
Thank you for your interest! We look forward to your visit.
Our SERVICE:
We will gladly accept your used vehicle in part exchange,
Customs license plates for 30 days including insurance,
EUR-1 + all customs documents for export,
TÜV / SP / UVV / Tachograph inspection / OBU installation,
Professional transport to the customer,
Transfer from Stuttgart Airport / Sindelfingen train station to our location by arrangement,
Retrofitting of additional attachments and other individual customer requirements possible by arrangement.
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2004
24 Sludinājumi tiešsaistē
Nosūtīt pieprasījumu
Tālrunis & Fakss
+49 7031 ... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Veiksmīgs
Jūsu ziņojums ir nosūtīts.
Mazā sludinājuma
Heilbronn
1 340 km
Miniekskavators
DOOSANDX60*38 KW*YANMAR MOTOR*
DOOSANDX60*38 KW*YANMAR MOTOR*
Veiksmīgs
Jūsu ziņojums ir nosūtīts.
Mazā sludinājuma
Andelst
1 337 km
Daļēji zemas kravnesības iekrāvēji
EMTECHNNR48 3 ASSER HYDRAULISCHE GESTUURDE KORTE UITS...
EMTECHNNR48 3 ASSER HYDRAULISCHE GESTUURDE KORTE UITS...
Veiksmīgs
Jūsu ziņojums ir nosūtīts.
Mazā sludinājuma
Andelst
1 337 km
Autokrāna kravas automašīna
VolvoFH 540 10X4 + FASSI F1650RAL.2.28 + JIB L616L K...
VolvoFH 540 10X4 + FASSI F1650RAL.2.28 + JIB L616L K...
Veiksmīgs
Jūsu ziņojums ir nosūtīts.
Mazā sludinājuma
Parma
1 667 km
Zema grīdas puspiekabe būvniecības tehnikas pārvadāšanai
bertojasemirimorchio culla allunagabile 2 assi
bertojasemirimorchio culla allunagabile 2 assi
Veiksmīgs
Jūsu ziņojums ir nosūtīts.
Mazā sludinājuma
Hoogerheide
1 447 km
Autokrāna kravas automašīna
DAFCF 85.410 8X2 RHD + Hiab XS855 EP6 Hipro
DAFCF 85.410 8X2 RHD + Hiab XS855 EP6 Hipro
Veiksmīgs
Jūsu ziņojums ir nosūtīts.
Mazā sludinājuma
Andelst
1 337 km
Autokrāna kravas automašīna
DAFXF 530 8X2+HIAB 1055E-8+JIB 150X-6 KRAAN/KRAN/C...
DAFXF 530 8X2+HIAB 1055E-8+JIB 150X-6 KRAAN/KRAN/C...
Veiksmīgs
Jūsu ziņojums ir nosūtīts.
Mazā sludinājuma
Diespeck
1 231 km
Kompaktais iekrāvējs
BobcatT770
BobcatT770
Veiksmīgs
Jūsu ziņojums ir nosūtīts.
Mazā sludinājuma
Gralla
1 280 km
Standarta vilcējs
MANTGX 18.460 4X2 BLS SZM Kipphydraulik
MANTGX 18.460 4X2 BLS SZM Kipphydraulik
Veiksmīgs
Jūsu ziņojums ir nosūtīts.
Mazā sludinājuma
Hedel
1 374 km
Autokrāna kravas automašīna
ScaniaG450 8x4 triple, PALFINGER PK92002 (92tm) FLYJI...
ScaniaG450 8x4 triple, PALFINGER PK92002 (92tm) FLYJI...
Veiksmīgs
Jūsu ziņojums ir nosūtīts.
Mazā sludinājuma
Lier
1 451 km
Konteineru krautotājs
CombiliftStraddle carrier
CombiliftStraddle carrier
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda











































































































































































































































































































