Puspiekabe ar staigājošo grīdu
STAS 13.50 "ECOhddisc93" 92,5m³

Fiksēta cena plus PVN
22 680 €
(26 989 € bruto)
Stāvoklis
Lietots
Atrašanās vieta
Korschenbroich-Glehn Vācija
Puspiekabe ar staigājošo grīdu STAS 13.50 "ECOhddisc93"   92,5m³
Puspiekabe ar staigājošo grīdu STAS 13.50 "ECOhddisc93"   92,5m³
Puspiekabe ar staigājošo grīdu STAS 13.50 "ECOhddisc93"   92,5m³
Puspiekabe ar staigājošo grīdu STAS 13.50 "ECOhddisc93"   92,5m³
Puspiekabe ar staigājošo grīdu STAS 13.50 "ECOhddisc93"   92,5m³
Puspiekabe ar staigājošo grīdu STAS 13.50 "ECOhddisc93"   92,5m³
Puspiekabe ar staigājošo grīdu STAS 13.50 "ECOhddisc93"   92,5m³
Puspiekabe ar staigājošo grīdu STAS 13.50 "ECOhddisc93"   92,5m³
Puspiekabe ar staigājošo grīdu STAS 13.50 "ECOhddisc93"   92,5m³
Puspiekabe ar staigājošo grīdu STAS 13.50 "ECOhddisc93"   92,5m³
more Images
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50

Pamatdati

Apzīmējums:
Puspiekabe ar staigājošo grīdu
Ražotājs:
STAS
Modelis:
13.50 "ECOhddisc93" 92,5m³
Stāvoklis:
lietots

Cena un atrašanās vieta

Fiksēta cena plus PVN
22 680 €
(26 989 € bruto)
Pārdevēja atrašanās vieta:
Dieselstr. 9, 41352 Korschenbroich-Glehn, Vācija Vācija
Zvanīt

Tehniskā informācija

Izmēri un svars

Iekraušanas telpas tilpums:
93 m³
Krautuves garums:
13 535 mm
Iekraušanas vietas platums:
2 480 mm
Iekraušanas telpas augstums:
2 825 mm

Asis un riteņi

Asu konfigurācija:
3 asis

Sīkāka informācija

Pirmā reģistrācija:
12/2018

Piedāvājuma informācija

Sludinājuma ID:
A233-44-004
Atsauces numurs:
4430
Atjaunināšana:
pēdējo reizi 17.11.2026

Apraksts

Chassis: Reinforced, continuous chassis design, new.
Superstructure: Self-supporting construction with corresponding reinforcements in the lower belt for particularly high stability and strength, 140 mm high reinforced cross members (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure (trailer construction max. 39,000 kg).
Hsdpfx As Akp Rfsmvsnw

Axles and Suspension: "Disc brake 22.5"
Jost (DCA) axle assemblies, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard information center, electronic brake wear indicator (BVA) readable in the control unit (display), 1st axle can be lifted with starting aid (new EC regulation, without control unit option).

Tires and Wheels:
6 wheels with tires size 385/65 R 22.5, approx. 50-60% tread, on Alcoa DuraBright rims? 11.75x22.5 ET 120

Kingpin:
2" bolted into a 10 mm thick plate.

Landing Gears:
Mechanical landing gears with two speeds, 2x 20 tons support load with swivel foot.

Braking System:
According to EC standard, EBS E-system Wabco with RSS system (Roll Stability Support) and Premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system.

Electrical System:
According to the guidelines of the EC standard 91/633 and 97/28 with 6 LED three-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels at the rear, position lights at the front 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-profile, 2 separate LED reversing lights on the side approx. at landing gear height.

Superstructure/Body: "Body fully welded inside", reinforced side walls.
Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn, aluminum body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, completely welded with upper and lower belt, plank profiles fully welded inside, floor as a sliding floor system on 140 mm ALU cross members, floor load approx. 9 tons/m2, cross members mounted close together (approx. 350mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 rotary latch locks, mounted in the welded aluminum rear frame on Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side, moving remainder unloading wall with Kevlar sheet approx. 1,800 mm long plus side Kevlar sheet sealing, aluminum wear plates on the side and rear approx. 2,000x1,500x4mm.

Hydraulic System: "Cargo - Floor" Sliding Floor System
Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lift slide bearings, type CF, 10 mm floor, ribbed design, hydraulics with approx. 200 mm working stroke, fixed points type "Faster" with high hydraulic locks mounted on the front wall, line size NW 21, fixed points with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electrical operation at the rear left with remote control integrated in a lockable, waterproof box, wear corners at the rear of the floor end.

Accessories:
6 PVC mudguards with

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.

Piegādātājs

Reģistrēts kopš: 2002

18 Sludinājumi tiešsaistē

Zvanīt

Nosūtīt pieprasījumu

Zemeus 
Vācija
Austrija
Šveice
Amerikas Savienotās Valstis
Apvienotā Karaliste
Francija
Beļģija
Spānija
Meksika
Itālija
Nīderlande
Polija
Krievijas Federācija
Baltkrievija (Baltkrievijas Republika)
Ukraina
Igaunija
Turcija
Jaunzēlande
Īrija
Čehijas Republika
Dānija
Somija
Zviedrija
Norvēģija
Luksemburga
Grieķija
Lietuva
Latvija
Islande
Portugāle
Brazīlija
Venecuēla
Argentīna
Ungārija
Slovākija
Rumānija
Moldova
Slovēnija
Serbija
Melnkalne
Albānija
Horvātija
Bulgārija
Ziemeļmaķedonija
Bosnija un Hercegovina
Izraēla
Ēģipte
Maroka
Indija
Indonēzija
Dienvidkoreja
Japāna
Taizeme
Malaizija
Vjetnama
Ķīna, Tautas Republika
Taivāna
Irāna
Bangladeša
Pieprasījumu neizdevās nosūtīt. Lūdzu, mēģiniet vēlreiz vēlāk.

Tālrunis & Fakss

+49 2182 ... sludinājumi