Darba platformas puspiekabe
ES-GE 3-Achs Sattelanhänger - Bordwände + CV

Stāvoklis
Jauns
Atrašanās vieta
Essen Vācija
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
more Images
ES-GE 3-Achs Sattelanhänger - Bordwände + CV
ES-GE 3-Achs Sattelanhänger - Bordwände + CV
ES-GE 3-Achs Sattelanhänger - Bordwände + CV
ES-GE 3-Achs Sattelanhänger - Bordwände + CV
ES-GE 3-Achs Sattelanhänger - Bordwände + CV
ES-GE 3-Achs Sattelanhänger - Bordwände + CV
ES-GE 3-Achs Sattelanhänger - Bordwände + CV
ES-GE 3-Achs Sattelanhänger - Bordwände + CV

Pamatdati

Cena un atrašanās vieta

Pārdevēja atrašanās vieta:
Heegstraße 6-8, 45356 Essen, Vācija Vācija
Zvanīt

Tehniskā informācija

Izmēri un svars

Kopējais svars:
43 000 kg
Maksimālā kravnesība:
35 440 kg

Asis un riteņi

Asu konfigurācija:
3 asis

Drošības funkcijas

ABS

Piedāvājuma informācija

Sludinājuma ID:
A233-66-668
Atsauces numurs:
36622
Atjaunināšana:
pēdējo reizi 21.11.2026

Apraksts

You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website.

Excerpt from the equipment:
Complete equipment available upon request.

Chassis
* Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads.
* Underrun protection, width approx. 700 mm, outer frame as a UNP profile, wear plate approx. 8 mm, front neck height approx. 130 mm.

Coupling device
* 2-inch kingpin hitch: 2 x 12 t hitches with level foot and single-side operation on the right-hand side.

Axles
* 3 x 9 t air suspension axle unit, disc brakes 22.5, total travel approx. 180 mm, lifting and lowering device via rotary valve.

Braking system
* Two-circuit air brake system according to EC with EBS and RSS.
* Automatic load-dependent regulation.
* Spring brake cylinders as parking brake.
* Interlock-protected coupling heads fixed to the front cross member, without connection line to the towing vehicle.

Tires
* 6, 385/55 R22,5 160J on steel rim 11.75 X 22,5 ET 120.
* Manufacturer of our choice, tire pressure monitoring system (TPMS) via CAN-bus system of the EBS.

Load securing
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t.
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t.
* In the outer frame, holes approx. every 400-600 mm for attaching lashing straps.

Front wall
* Reinforced steel construction, fixed, approx. 1,400 mm high, interior paneling with approx. 9 mm screen-printed sheet (approx. 1,250 mm high).

Ksdpfxj Aldaps Ac Nedw
Floor
* Approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanized omega steel profiles.

Lighting system
* According to EC, 24 volts.
* With multi-chamber lights.
* LED side marker lights.
* LED position lights, white, front.
* LED outline lights, rear.
* License plate lights.
* Lane-keeping lights, LED. 1x15- and 2x7-pin connectors on the front cross member.

Equipment
* 2 wheel chocks with holder.
* Warning signs ECE 70.
* Holder for rotating beacon, including rotating beacon.
* 2 rubber rub rails at the rear.
* Folding and extendable ladder at the rear right (without platform).
* 1 open box made of perforated sheet, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles.

Paint
* Front wall: RAL 9005 deep black.
* Chassis: Hot-dip galvanized, outer frame hot-dip galvanized + RAL 9005 deep black.
* Middle beams: RAL 9005 deep black.
* SSV: Aluminum, anodized.
* Underrun protection: white (RAL 9016 traffic white).
* Components: galvanized/black KTL coating.
* Rims: silver.
* Contour marking: complete, yellow.

Incl. accessories
* First axle can be lifted, with fully automatic, load-dependent lift control.
* 10 pairs of stake pockets in the outer frame, evenly distributed.
* 4 rows of stake pockets transverse to the loading area.
* 20 pieces of stakes made of galvanized tube 80/50, total length approx. 1,200 mm.
* Inside on the front wall, a magazine for 20 pieces of plug-in stakes.
* 5 x 250 mm side walls and rear wall made of anodized aluminum hollow profiles, foldable and removable.
* Removable Kinnegrip stakes.
* Side wall and stake magazine: under the chassis, left and right, slide rails for side walls and stakes. Container locks for 1 x 40" and 2 x 20" containers, flush at the rear. Container locks for 1 x 20" container, in the middle.
* Work lights on the lamp carrier (switched on when reverse gear is eng

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.

Piegādātājs

Reģistrēts kopš: 2003

68 Sludinājumi tiešsaistē

Zvanīt

Nosūtīt pieprasījumu

Zemeus 
Vācija
Austrija
Šveice
Amerikas Savienotās Valstis
Apvienotā Karaliste
Francija
Beļģija
Spānija
Meksika
Itālija
Nīderlande
Polija
Krievijas Federācija
Baltkrievija (Baltkrievijas Republika)
Ukraina
Igaunija
Turcija
Jaunzēlande
Īrija
Čehijas Republika
Dānija
Somija
Zviedrija
Norvēģija
Luksemburga
Grieķija
Lietuva
Latvija
Islande
Portugāle
Brazīlija
Venecuēla
Argentīna
Ungārija
Slovākija
Rumānija
Moldova
Slovēnija
Serbija
Melnkalne
Albānija
Horvātija
Bulgārija
Ziemeļmaķedonija
Bosnija un Hercegovina
Izraēla
Ēģipte
Maroka
Indija
Indonēzija
Dienvidkoreja
Japāna
Taizeme
Malaizija
Vjetnama
Ķīna, Tautas Republika
Taivāna
Irāna
Bangladeša
Pieprasījumu neizdevās nosūtīt. Lūdzu, mēģiniet vēlreiz vēlāk.

Tālrunis & Fakss

+49 201 8... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
more images
Essen
1 291 km
Darba platformas puspiekabe
ES-GE3-Achs Sattelanhänger - Bordwände + CV
Zvanīt
Mazā sludinājuma
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
more images
Essen
1 291 km
Darba platformas puspiekabe
ES-GE3-Achs Sattelanhänger - Bordwände + CV
Zvanīt
Mazā sludinājuma
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Darba platformas puspiekabe ES-GE 3-Achs Sattelanhänger - Bordwände + CV
more images
Essen
1 291 km
Darba platformas puspiekabe
ES-GE3-Achs Sattelanhänger - Bordwände + CV
Zvanīt