Zema profila puspiekabeFAYMONVILLE
MAX Trailer MAX100 Semi-Tieflader Hebebett
Zema profila puspiekabe
FAYMONVILLE
MAX Trailer MAX100 Semi-Tieflader Hebebett
Stāvoklis
Jauns
Atrašanās vieta
Essen 

Pamatdati
Cena un atrašanās vieta
- Pārdevēja atrašanās vieta:
- Heegstraße 6-8, 45356 Essen, Vācija

Zvanīt
Tehniskā informācija
Izmēri un svars
Kopējais svars:
48 000 kg
Maksimālā kravnesība:
37 075 kg
Asis un riteņi
Asu konfigurācija:
3 asis
Drošības funkcijas
ABS
Piedāvājuma informācija
- Sludinājuma ID:
- A233-66-671
- Atsauces numurs:
- 37418
- Atjaunināšana:
- pēdējo reizi 21.11.2026
Apraksts
You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website.
Excerpt from the equipment:
Complete equipment available upon request.
Gooseneck
* With angled front corners approx. 45° and rear slope approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN), hardwood flooring approx. 30 mm thick
Loading platform
* Hydraulically raisable and lowerable after the gooseneck, length approx. 2,800 mm, with rear slope approx. 1,000 mm x 8°
* 6 pairs of lashing rings that fold outward (LC 5,000 daN)
* 2 pairs of lashing rings that fold outward (LC 10,000 daN)
* 1 pair of lashing rings that fold inward on the central beam at the front (LC 10,000 daN)
* Recesses in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN)
* Grated floor C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), checkered plate flooring over the axles
Two-part steel ramps
* One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with grated floor C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm)
* Ramp with hydraulically raisable and lowerable ramp sections. Hydraulic lifting mechanism, hydraulically adjustable.
* Maximum load per pair: approx. 40,000 kg
Kingpin
* JOST kingpin (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles
* BPW axles and suspension, 2 axles fixed, 1 axle steerable
* Technical axle load: 12,000 kg each
* Electro-magnetic parking brake activated via reverse gear and manually
* Air suspension with raising and lowering valve
Braking system
* WABCO braking system in accordance with EU regulations with EBS-E (2S2M)
Tires
* 235/75 R 17.5 3PMSF
* Manufacturer of our choice
* TPMS: TPMS tire pressure monitoring system according to ECE R 141
Paintwork
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to guarantee the best corrosion protection. Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red according to the RAL 841GL system.
* Rims in silver-gray
Included accessories:
* 2-inch kingpin
* One galvanized steel front bulkhead, approx. 400 mm high. Grated floor in the slope of the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm). Grated floor in the slope of the loading platform C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm)
* Electro-hydraulic unit at the rear under the loading platform
* Aluminum side and rear walls on the gooseneck, plug-in type, approx. 2,440 x 400 mm (L x H)
* The rear galvanized stake pockets are removable. (Length of the superstructure approx. 2,560 mm)
* One electric winch with wireless remote control, approx. 5,400 kg lifting capacity, including approx. 9.5 mm thick wire rope, approx. 24 m long, with rope guide pulley. Screw-on approx. 5 t ring for securing the winch cable on the gooseneck without a pulley.
Kodpfxs Aldatj Ac Nedw
* One galvanized toolbox integrated in the angled gooseneck with an opening for a winch. Grated floor on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm)
* 7 pairs of stake pockets for stake pockets approx. 100 x 50 mm in the outer frame of the loading platform
* Lift axle on the front axle with control via TEBS E depending on the current axle load and current load condition
* 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN)
* 2 pairs in the lift bed, 5 pairs in the rear pa
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Excerpt from the equipment:
Complete equipment available upon request.
Gooseneck
* With angled front corners approx. 45° and rear slope approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN), hardwood flooring approx. 30 mm thick
Loading platform
* Hydraulically raisable and lowerable after the gooseneck, length approx. 2,800 mm, with rear slope approx. 1,000 mm x 8°
* 6 pairs of lashing rings that fold outward (LC 5,000 daN)
* 2 pairs of lashing rings that fold outward (LC 10,000 daN)
* 1 pair of lashing rings that fold inward on the central beam at the front (LC 10,000 daN)
* Recesses in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN)
* Grated floor C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), checkered plate flooring over the axles
Two-part steel ramps
* One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with grated floor C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm)
* Ramp with hydraulically raisable and lowerable ramp sections. Hydraulic lifting mechanism, hydraulically adjustable.
* Maximum load per pair: approx. 40,000 kg
Kingpin
* JOST kingpin (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles
* BPW axles and suspension, 2 axles fixed, 1 axle steerable
* Technical axle load: 12,000 kg each
* Electro-magnetic parking brake activated via reverse gear and manually
* Air suspension with raising and lowering valve
Braking system
* WABCO braking system in accordance with EU regulations with EBS-E (2S2M)
Tires
* 235/75 R 17.5 3PMSF
* Manufacturer of our choice
* TPMS: TPMS tire pressure monitoring system according to ECE R 141
Paintwork
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to guarantee the best corrosion protection. Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red according to the RAL 841GL system.
* Rims in silver-gray
Included accessories:
* 2-inch kingpin
* One galvanized steel front bulkhead, approx. 400 mm high. Grated floor in the slope of the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm). Grated floor in the slope of the loading platform C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm)
* Electro-hydraulic unit at the rear under the loading platform
* Aluminum side and rear walls on the gooseneck, plug-in type, approx. 2,440 x 400 mm (L x H)
* The rear galvanized stake pockets are removable. (Length of the superstructure approx. 2,560 mm)
* One electric winch with wireless remote control, approx. 5,400 kg lifting capacity, including approx. 9.5 mm thick wire rope, approx. 24 m long, with rope guide pulley. Screw-on approx. 5 t ring for securing the winch cable on the gooseneck without a pulley.
Kodpfxs Aldatj Ac Nedw
* One galvanized toolbox integrated in the angled gooseneck with an opening for a winch. Grated floor on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm)
* 7 pairs of stake pockets for stake pockets approx. 100 x 50 mm in the outer frame of the loading platform
* Lift axle on the front axle with control via TEBS E depending on the current axle load and current load condition
* 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN)
* 2 pairs in the lift bed, 5 pairs in the rear pa
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2003
68 Sludinājumi tiešsaistē
Nosūtīt pieprasījumu
Tālrunis & Fakss
+49 201 8... sludinājumi
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda
































