Zema kravnes piekabe

MÜLLER-MITTELTAL T3 Profi 30,0 Neu, Baggerstielablage, hydr. Ramp

* T3 Profile 30.0:
* EBS braking system
* TPMS (tire pressure monitoring system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 ton BPW Eco axles
* Parabolic springs
* Mechanical axle compensation at the rear
* Side impact protection
* Swivel supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages at the front and rear
* Front axle with closed plastic fenders, and rear axle with straight, galvanized steel splash guards, each with splash protection
* Reflective contour striping on the sides and rear
* Folding cover (hot-dip galvanized) for the tool box in the turntable platform
* Multi-voltage system
* LED tail lights
* Rotating beacon (removable) at the rear
* Drawbar with 40 mm drawbar eye and height adjustment via coil spring & tension lock
* 15-pole electrical connector
* 4 lashing pockets on each side (however, no lashing bars are included) with simultaneous lashing capability
* La-Si package consisting of: 2 lashing eyes (6.4 tons) at the front left & right on the main frame of the turntable platform, 5 pairs of pivoting and lowering UVV lashing rings, loadable in all directions and embedded in the outer frame - 13.4 tons in the corners, otherwise 10 tons.
Ljdpfxel Th Ado Ah Eerr
* 6 pairs of mechanical folding outriggers for a total width of 3 m (however, not in the rear slope)
* Extension boards placed in the center of the loading area
* Excavator arm rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 ton lashing rings on the side in the excavator arm rest)
* Hydraulically operated, single-piece loading ramps (approx. 3,000 x 720 mm)
* 4-way control block for later retrofitting of hydraulic ramp shifting
* Mechanical lateral ramp shifting
* Loading area above the turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm approach angle)
* Chassis, turntable, drawbar, and loading ramps are hot-dip galvanized
* Axles, springs, air tanks, etc. are painted in a black tone
* 235/75 R 17.5 twin tires
* 5,900 kg tare weight
* --technically possible gross weight of 30,000 kg--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Errors and prior sale are subject to change
* Available from approximately week 44/2026

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.