Zema kravnes piekabeMÜLLER-MITTELTAL
14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
Zema kravnes piekabe
MÜLLER-MITTELTAL
14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
fiksēta cena bez PVN
28 500 €
(33 915 € bruto)
Izgatavošanas gads
2026
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Rādīt attēlus
Rādīt karti
Pamatdati
Cena un atrašanās vieta
fiksēta cena bez PVN
28 500 €
(33 915 € bruto)
- Pārdevēja atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Vācija

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 10 900 kg
- Kopējais svars:
- 14 400 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 5 000 mm
- Iekraušanas vietas platums:
- 2 420 mm
- Iekraušanas telpas augstums:
- 500 mm
Piedāvājuma informācija
- Ieraksta ID:
- A104-27-096
- Atsauces Nr.:
- 57761
- Pēdējoreiz atjaunots:
- 29.1.2461070
Apraksts
* Wabco EBS
* RDÜ Tire Pressure Monitoring System
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7-ton Gigant axles
* Parabolic springs with tandem compensating unit
* 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange drawbar eye
* Jost mechanical landing gear at the front
* 2 mechanical hot-dip galvanized folding supports at the rear
* 15-pin power connector
* LED taillights
* Hot-dip galvanized bolted underrun protection
* Toolbox made of galvanized sheet steel on the right side
* Plastic quarter fender
* Hot-dip galvanized chassis
Itsdpfx Acjl Th A Es Djc
* Steel pallet, 3-way tipping body
* Continuous side walls with inner tube reinforcement at the top - without center stanchions - foldable with side wall spring jack
* Tailgate foldable and swinging via manual Central locking system
* Hot-dip galvanized bolted rear stanchions
* 1 x 5-ton lashing ring in each corner and 4 x 3-ton lashing rings on each side. Lashing eyes embedded in the outer frame
* 4 mm sheet metal floor made of fine-grain steel
* Net hooks, rear mounting rail for the landing ramps
* Preparation for later retrofitting of side wall extensions
* Reinforced body with load securing certificate according to EN 12642 XL
* 2-step step on the left side as a climbing aid
* 1 pair of aluminum landing ramps approx. 3,570 x 400 mm (load capacity 8 tons per pair) suitable for rubber-tired and tracked vehicles
* Rear-locking storage compartment embedded in the chassis below the loading area
* Axles, springs, air tanks, and landing gear painted in a black tone
* Chassis, drawbar, floor, front wall, and folding bags are hot-dip galvanized
* New vehicle without first registration and with manufacturer's warranty
* Tires 385/55 R 22.5
* Side walls painted in RAL 9010 pure white
* Paint finish Side panels available in a RAL color for an additional charge
* Errors and prior sale subject to change
* Available for immediate delivery from Egestorf
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
* RDÜ Tire Pressure Monitoring System
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7-ton Gigant axles
* Parabolic springs with tandem compensating unit
* 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange drawbar eye
* Jost mechanical landing gear at the front
* 2 mechanical hot-dip galvanized folding supports at the rear
* 15-pin power connector
* LED taillights
* Hot-dip galvanized bolted underrun protection
* Toolbox made of galvanized sheet steel on the right side
* Plastic quarter fender
* Hot-dip galvanized chassis
Itsdpfx Acjl Th A Es Djc
* Steel pallet, 3-way tipping body
* Continuous side walls with inner tube reinforcement at the top - without center stanchions - foldable with side wall spring jack
* Tailgate foldable and swinging via manual Central locking system
* Hot-dip galvanized bolted rear stanchions
* 1 x 5-ton lashing ring in each corner and 4 x 3-ton lashing rings on each side. Lashing eyes embedded in the outer frame
* 4 mm sheet metal floor made of fine-grain steel
* Net hooks, rear mounting rail for the landing ramps
* Preparation for later retrofitting of side wall extensions
* Reinforced body with load securing certificate according to EN 12642 XL
* 2-step step on the left side as a climbing aid
* 1 pair of aluminum landing ramps approx. 3,570 x 400 mm (load capacity 8 tons per pair) suitable for rubber-tired and tracked vehicles
* Rear-locking storage compartment embedded in the chassis below the loading area
* Axles, springs, air tanks, and landing gear painted in a black tone
* Chassis, drawbar, floor, front wall, and folding bags are hot-dip galvanized
* New vehicle without first registration and with manufacturer's warranty
* Tires 385/55 R 22.5
* Side walls painted in RAL 9010 pure white
* Paint finish Side panels available in a RAL color for an additional charge
* Errors and prior sale subject to change
* Available for immediate delivery from Egestorf
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Egestorf
1 012 km
Trīspusējā pašizgāzēja piekabe
MÜLLER-MITTELTAL14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
MÜLLER-MITTELTAL14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
Mazā sludinājuma
Triptis
1 076 km
Pašizgāzējs 3 puses
FlieglTLK 118
FlieglTLK 118
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda




























































