Piekabe ar darba platformuMÜLLER-MITTELTAL
19 to. Tandemtieflader mit Auffahrrampe NEU
Piekabe ar darba platformu
MÜLLER-MITTELTAL
19 to. Tandemtieflader mit Auffahrrampe NEU
Fiksēta cena plus PVN
29 950 €
(35 640 € bruto)
Ražošanas gads
2026
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Rādīt attēlus
Rādīt karti
Pamatdati
Cena un atrašanās vieta
Fiksēta cena plus PVN
29 950 €
(35 640 € bruto)
- Atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Deutschland

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 14 660 kg
- Kopējais svars:
- 18 000 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 6 270 mm
- Iekraušanas vietas platums:
- 2 470 mm
- Iekraušanas telpas augstums:
- 400 mm
Piedāvājuma informācija
- Sludinājuma ID:
- A104-27-186
- Atsauces numurs:
- 58341
- Atjaunināšana:
- pēdējo reizi 14.02.2026
Apraksts
* ETÜ-TA-R 19.0:
* Wabco EBS brake system
* RDÜ tire monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 10-ton BPW Eco axles
* Parabolic springs -110 mm wide- with tandem equalizer
* Drawbar with 50 mm flange eye and height-adjustable drawbar
* Jost landing gear at the front
* Exterior folding supports at the rear
* Lateral underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED tail lights
* 50 mm softwood floor
* Fixture in front of the bulkhead for optional retrofitting of container locks
* Bolted smooth sheet steel front wall
* Side walls made of steel sheet - trapezoidal profiled, foldable with drop-side spring assist
* Steel rear wall, insertable between the ramps - bracket for storage inside at the front wall when not in use
* Bolt-on rear stanchions
* Perforated outer frame, approx. 45 degrees angled, with 2-ton lashing capacity every 480 mm
* Optional installation of 3-ton retractable lashing rings every 600 mm
Nsdpfxjl Th Hwj Ahxokw
* 1 x 10-ton lashing ring in each of the front and rear corners, various bores in the front and rear crossmembers for additional 1.2-ton lashing options
* Profifix lashing rail longitudinally centered, for lashing capacity up to LC 3000 daN
* One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (collapsible to 20 mm)
* Rear approach angle approx. 860 mm
* Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanized
* Drop sides painted in RAL 9010 pure white
* Optional painting of side panels in an RAL color for an extra charge
* Axles, springs, air tank, flange eye, and landing gear painted in black
* New vehicle with full manufacturer's warranty
* Subject to errors and prior sale
* Available approx. from week 21/2026
* Sample images
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
* Wabco EBS brake system
* RDÜ tire monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 10-ton BPW Eco axles
* Parabolic springs -110 mm wide- with tandem equalizer
* Drawbar with 50 mm flange eye and height-adjustable drawbar
* Jost landing gear at the front
* Exterior folding supports at the rear
* Lateral underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED tail lights
* 50 mm softwood floor
* Fixture in front of the bulkhead for optional retrofitting of container locks
* Bolted smooth sheet steel front wall
* Side walls made of steel sheet - trapezoidal profiled, foldable with drop-side spring assist
* Steel rear wall, insertable between the ramps - bracket for storage inside at the front wall when not in use
* Bolt-on rear stanchions
* Perforated outer frame, approx. 45 degrees angled, with 2-ton lashing capacity every 480 mm
* Optional installation of 3-ton retractable lashing rings every 600 mm
Nsdpfxjl Th Hwj Ahxokw
* 1 x 10-ton lashing ring in each of the front and rear corners, various bores in the front and rear crossmembers for additional 1.2-ton lashing options
* Profifix lashing rail longitudinally centered, for lashing capacity up to LC 3000 daN
* One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (collapsible to 20 mm)
* Rear approach angle approx. 860 mm
* Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanized
* Drop sides painted in RAL 9010 pure white
* Optional painting of side panels in an RAL color for an extra charge
* Axles, springs, air tank, flange eye, and landing gear painted in black
* New vehicle with full manufacturer's warranty
* Subject to errors and prior sale
* Available approx. from week 21/2026
* Sample images
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
180 Sludinājumi tiešsaistē
Nosūtīt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda






























