Zema kravnes piekabeMÜLLER-MITTELTAL
3- Achs 30 to. Tieflader verz. hydr. Rampe NEU
Zema kravnes piekabe
MÜLLER-MITTELTAL
3- Achs 30 to. Tieflader verz. hydr. Rampe NEU
fiksēta cena bez PVN
42 500 €
(50 575 € bruto)
Izgatavošanas gads
2026
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Rādīt attēlus
Rādīt karti
Pamatdati
Cena un atrašanās vieta
fiksēta cena bez PVN
42 500 €
(50 575 € bruto)
- Pārdevēja atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Vācija

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 24 020 kg
- Kopējais svars:
- 30 000 kg
- Asu konfigurācija:
- 3 asis
- Krautuves garums:
- 8 460 mm
- Iekraušanas vietas platums:
- 2 520 mm
Piedāvājuma informācija
- Ieraksta ID:
- A104-27-243
- Atsauces Nr.:
- 5844
- Pēdējoreiz atjaunots:
- 13.12.2461023
Apraksts
* T3 Profi 30.0:
* EBS (Electronic Braking System)
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t Gigant axles
* Parabolic springs, mechanical axle equalization at the rear
* Side underrun protection
* Swing-down support legs at the rear of the chassis frame
* Mechanically adjustable warning panel kits front and rear
* Front axle with closed plastic mudguards and rear axle with straight galvanized steel splash guards, each fitted with spray protection
* Reflective contour markings on the sides and rear
* Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm
* Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform
* Multi-voltage system
* LED rear lights
* Rotating beacon (removable) at the rear
* Towing bar with 50 mm towing eye and height adjustment via tension spring and turnbuckle
* 15-pin power connector
* Four stake pockets per side (stakes not included), each also equipped with lashing points
* Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the turntable platform, 6 pairs of UVV swing-down and retractable lashing rings, loadable in all directions and recessed in the outer frame – 13.4 t load capacity at the corners and 10 t elsewhere
* 6 pairs of mechanical folding outriggers for a total width of 3 m (not on the rear chamfer)
* Widening planks stored in the center of the loading area
* One-piece hot-dip galvanized hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways
* 4-way valve block for retrofitting hydraulic side ramp shift
* Loading area above the turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm approach slope)
* Chassis, turntable, towing bar, and ramps hot-dip galvanized
* Axles, springs, air reservoir, etc. painted in black
* 235/75 R 17.5 twin tires
* Curb weight approx. 5,980 kg
* Technically permissible gross weight of 30,000 kg
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
* Available from calendar week 11/2026
Kodpjl Th Nnefx Aggsfa
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
* EBS (Electronic Braking System)
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t Gigant axles
* Parabolic springs, mechanical axle equalization at the rear
* Side underrun protection
* Swing-down support legs at the rear of the chassis frame
* Mechanically adjustable warning panel kits front and rear
* Front axle with closed plastic mudguards and rear axle with straight galvanized steel splash guards, each fitted with spray protection
* Reflective contour markings on the sides and rear
* Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm
* Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform
* Multi-voltage system
* LED rear lights
* Rotating beacon (removable) at the rear
* Towing bar with 50 mm towing eye and height adjustment via tension spring and turnbuckle
* 15-pin power connector
* Four stake pockets per side (stakes not included), each also equipped with lashing points
* Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the turntable platform, 6 pairs of UVV swing-down and retractable lashing rings, loadable in all directions and recessed in the outer frame – 13.4 t load capacity at the corners and 10 t elsewhere
* 6 pairs of mechanical folding outriggers for a total width of 3 m (not on the rear chamfer)
* Widening planks stored in the center of the loading area
* One-piece hot-dip galvanized hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways
* 4-way valve block for retrofitting hydraulic side ramp shift
* Loading area above the turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm approach slope)
* Chassis, turntable, towing bar, and ramps hot-dip galvanized
* Axles, springs, air reservoir, etc. painted in black
* 235/75 R 17.5 twin tires
* Curb weight approx. 5,980 kg
* Technically permissible gross weight of 30,000 kg
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
* Available from calendar week 11/2026
Kodpjl Th Nnefx Aggsfa
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Egestorf
1 011 km
Piekabe ar darba platformu
MÜLLER-MITTELTAL3- Achs 30 to. Tieflader verz. hydr. Rampe NEU
MÜLLER-MITTELTAL3- Achs 30 to. Tieflader verz. hydr. Rampe NEU
Mazā sludinājuma
Schwebheim
1 219 km
Zema kravnes piekabe
MösleinTT 14 14,4 t Tandemtieflader, 7,20 m langNeufahrzeug
MösleinTT 14 14,4 t Tandemtieflader, 7,20 m langNeufahrzeug
Mazā sludinājuma
Velddriel
1 372 km
Riteņu ekskavators
KomatsuPW180-11
KomatsuPW180-11
Mazā sludinājuma
Egestorf
1 011 km
Piekabe ar darba platformu
MÜLLER-MITTELTAL3-achs 30 to., 3 mtr. Paket, verzinkt, Luftfed.
MÜLLER-MITTELTAL3-achs 30 to., 3 mtr. Paket, verzinkt, Luftfed.
Mazā sludinājuma
Schwebheim
1 219 km
Zema kravnes piekabe
MösleinT 3-6,60 VB 3 Achs Tieflader- Anhänger, Luftgefedert, Verbreiterung
MösleinT 3-6,60 VB 3 Achs Tieflader- Anhänger, Luftgefedert, Verbreiterung
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda




































































































