Zema kravnes piekabeMÜLLER-MITTELTAL
11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
Zema kravnes piekabe
MÜLLER-MITTELTAL
11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
fiksēta cena bez PVN
28 500 €
(33 915 € bruto)
Izgatavošanas gads
2024
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Rādīt attēlus
Rādīt karti
Pamatdati
Cena un atrašanās vieta
fiksēta cena bez PVN
28 500 €
(33 915 € bruto)
- Pārdevēja atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Vācija

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 8 620 kg
- Kopējais svars:
- 11 900 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 5 500 mm
- Iekraušanas vietas platums:
- 2 420 mm
- Iekraušanas telpas augstums:
- 500 mm
Piedāvājuma informācija
- Ieraksta ID:
- A112-18-097
- Atsauces Nr.:
- 58921
- Pēdējoreiz atjaunots:
- 13.1.2461054
Apraksts
* KA-TA-R 11.9:
----Brakes:
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalization unit
----Drawbar / Flange Eye:
* Height-adjustable (up to 300 mm) hot-dip galvanized drawbar with 40 mm flanged towing eye
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* LED rear lights
----General Attachments:
* Jost mechanical landing gear at the front
* Two mechanical hot-dip galvanized folding supports at the rear
* Galvanized steel toolbox, right-hand side
* Hot-dip galvanized bolted underrun protection
* Galvanized steel toolbox, right-hand side
* Plastic quarter mudguards
----Tipper Body:
* Mesh hooks on the sides and rear at the central locking mounts plus 3 at the front wall
* Hot-dip galvanized chassis
* Steel pallet 3-way tipper body
* Continuous drop sides, foldable without centre stanchions, with drop side spring assist
* Foldable and swinging tailgate via manual central locking
* Hot-dip galvanized, bolted rear stanchions
* 4 mm steel floor plate
* Preparation for subsequent fitting of side extensions
* 5.5 meter long body
----Load Securing:
* One 5 t lashing ring at each corner
* Plus four 3 t recessed lashing rings per side in the outer frame
----Ramps:
* Rear mounting rail for approach ramps
* One pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Rear lockable storage compartment recessed under body in chassis
----Wheelbase:
Dcjdjm Angvopfx Aaxsc
* Wheelbase: 990 mm
----Tyres:
* Tyres: 235/75R17.5
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Tipper body painted in RAL 9010 pure white
* Painting of side walls and tipper body in any RAL color available for additional cost
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle without initial registration, with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf on the A7
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
----Brakes:
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalization unit
----Drawbar / Flange Eye:
* Height-adjustable (up to 300 mm) hot-dip galvanized drawbar with 40 mm flanged towing eye
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* LED rear lights
----General Attachments:
* Jost mechanical landing gear at the front
* Two mechanical hot-dip galvanized folding supports at the rear
* Galvanized steel toolbox, right-hand side
* Hot-dip galvanized bolted underrun protection
* Galvanized steel toolbox, right-hand side
* Plastic quarter mudguards
----Tipper Body:
* Mesh hooks on the sides and rear at the central locking mounts plus 3 at the front wall
* Hot-dip galvanized chassis
* Steel pallet 3-way tipper body
* Continuous drop sides, foldable without centre stanchions, with drop side spring assist
* Foldable and swinging tailgate via manual central locking
* Hot-dip galvanized, bolted rear stanchions
* 4 mm steel floor plate
* Preparation for subsequent fitting of side extensions
* 5.5 meter long body
----Load Securing:
* One 5 t lashing ring at each corner
* Plus four 3 t recessed lashing rings per side in the outer frame
----Ramps:
* Rear mounting rail for approach ramps
* One pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Rear lockable storage compartment recessed under body in chassis
----Wheelbase:
Dcjdjm Angvopfx Aaxsc
* Wheelbase: 990 mm
----Tyres:
* Tyres: 235/75R17.5
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Tipper body painted in RAL 9010 pure white
* Painting of side walls and tipper body in any RAL color available for additional cost
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle without initial registration, with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf on the A7
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Egestorf
1 012 km
Trīspusējā pašizgāzēja piekabe
MÜLLER-MITTELTAL11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
MÜLLER-MITTELTAL11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda




















































