Trīspusējā pašizgāzēja piekabeMÜLLER-MITTELTAL
11,9 to. Kipper/ Rampen, 1 mtr Gitteraufsätze
Trīspusējā pašizgāzēja piekabe
MÜLLER-MITTELTAL
11,9 to. Kipper/ Rampen, 1 mtr Gitteraufsätze
fiksēta cena bez PVN
29 450 €
(35 046 € bruto)
Izgatavošanas gads
2024
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Rādīt attēlus
Rādīt karti
Pamatdati
- Apzīmējums:
- Trīspusējā pašizgāzēja piekabe
- Ražotājs:
- MÜLLER-MITTELTAL
- Izgatavošanas gads:
- 2024
- Stāvoklis:
- jauns
Cena un atrašanās vieta
fiksēta cena bez PVN
29 450 €
(35 046 € bruto)
- Pārdevēja atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Vācija

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 8 450 kg
- Kopējais svars:
- 11 900 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 5 000 mm
- Iekraušanas vietas platums:
- 22 420 mm
- Iekraušanas telpas augstums:
- 1 500 mm
Piedāvājuma informācija
- Ieraksta ID:
- A134-70-013
- Atsauces Nr.:
- 6013 a
- Pēdējoreiz atjaunots:
- 25.6.2460852
Apraksts
* KA-TA-R 11.9 Masterline:
* incl. 1 mtr grid attachments
* EBS brake system
* Emergency release device for spring brake cylinders
* RDÜ tire pressure monitoring
* Drum brakes
* 2 x 5.5 to. BPW axles
* Parabolic springs with tandem compensation unit
* 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flanged drawbar eye
* Jost mech. support winch at the front
* 2 mechanical hot-dip galvanized folding supports at the rear
* Tool box made of galvanized sheet steel on the right side
* 15-pin power plug
* Bolted underride guard with LED tail lights
* Plastic quarter mudguards
* Mesh hooks at the side and rear in the bearings of the central locking system and 3 pieces on the outside of the bulkhead
* Hot-dip galvanized chassis
* Fully galvanized steel Pal. 3 side tipper body
* Full-length side walls without central stanchion can be folded down with dropside spring lifter
* Tailgate can be folded down and swung open via man. Central locking
* hot-dip galvanized bolted rear stanchion
* 1 x 5 to. lashing ring in each corner Lashing ring recessed and foldable in each corner and 4 x 3 tons at each side.
* Lashing rings recessed in the outer frame and hinged
* 4 mm sheet steel floor
* Rear mounting rail for feeder ramps
* Reinforced body with load securing certificate to EN 12642 XL
* 1 pair of aluminum docking ramps approx. 3,570 x 400 mm (load capacity 8 to. / pair) suitable for rubber-tyred and tracked vehicles
* Storage compartment lockable from the rear under the loading area recessed in the chassis
* 235/75 R 17.5 tires
* Axles, springs, air reservoir, drawbar and support winch painted black
* Hot-dip galvanized side wall paint
* 1 metre galvanized grid attachments
* Sample pictures
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available from Egestorf on the A7
Tjdpfxep Ncl Ss Abzod
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
* incl. 1 mtr grid attachments
* EBS brake system
* Emergency release device for spring brake cylinders
* RDÜ tire pressure monitoring
* Drum brakes
* 2 x 5.5 to. BPW axles
* Parabolic springs with tandem compensation unit
* 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flanged drawbar eye
* Jost mech. support winch at the front
* 2 mechanical hot-dip galvanized folding supports at the rear
* Tool box made of galvanized sheet steel on the right side
* 15-pin power plug
* Bolted underride guard with LED tail lights
* Plastic quarter mudguards
* Mesh hooks at the side and rear in the bearings of the central locking system and 3 pieces on the outside of the bulkhead
* Hot-dip galvanized chassis
* Fully galvanized steel Pal. 3 side tipper body
* Full-length side walls without central stanchion can be folded down with dropside spring lifter
* Tailgate can be folded down and swung open via man. Central locking
* hot-dip galvanized bolted rear stanchion
* 1 x 5 to. lashing ring in each corner Lashing ring recessed and foldable in each corner and 4 x 3 tons at each side.
* Lashing rings recessed in the outer frame and hinged
* 4 mm sheet steel floor
* Rear mounting rail for feeder ramps
* Reinforced body with load securing certificate to EN 12642 XL
* 1 pair of aluminum docking ramps approx. 3,570 x 400 mm (load capacity 8 to. / pair) suitable for rubber-tyred and tracked vehicles
* Storage compartment lockable from the rear under the loading area recessed in the chassis
* 235/75 R 17.5 tires
* Axles, springs, air reservoir, drawbar and support winch painted black
* Hot-dip galvanized side wall paint
* 1 metre galvanized grid attachments
* Sample pictures
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available from Egestorf on the A7
Tjdpfxep Ncl Ss Abzod
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda












