Piekabe ar darba platformuMÜLLER-MITTELTAL
14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Piekabe ar darba platformu
MÜLLER-MITTELTAL
14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Fiksēta cena plus PVN
29 900 €
(35 581 € bruto)
Ražošanas gads
2025
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Rādīt attēlus
Rādīt karti
Pamatdati
Cena un atrašanās vieta
Fiksēta cena plus PVN
29 900 €
(35 581 € bruto)
- Atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Deutschland

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 10 900 kg
- Kopējais svars:
- 14 400 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 6 270 mm
- Iekraušanas vietas platums:
- 2 470 mm
- Iekraušanas telpas augstums:
- 400 mm
Piedāvājuma informācija
- Sludinājuma ID:
- A144-06-196
- Atsauces numurs:
- 61581
- Atjaunināšana:
- pēdējo reizi 19.02.2026
Apraksts
ETÜ-TA-R 14.4
----Braking system:
* EBS electronic braking system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Tow bar / Flange eye:
* Tow bar height-adjustable by 300 mm
* Tow bar extension by 250 mm to 2,250 mm
* 40 mm flange towing eye
----Lighting / Electrics:
* RDÜ (tyre pressure monitoring system)
* LED tail lights 12 / 24 V
* 15-pin power connector
----General attachments:
* Jost landing gear front
* Externally mounted, hot-dip galvanized folding supports at rear
* Plastic toolbox, front right, mounted on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
Nkodpfsq Dyvyjx Ahxjw
* 50 mm softwood floor
* Fittings in front of bulkhead for retrofitting container locks
* Bolted flat sheet steel bulkhead
* Drop sides made of trapezoidal-profiled steel sheet, folding with drop side lifting springs
* Rear steel wall retractable between ramp holders, stowable in front of bulkhead when not in use
* Bolted rear stanchions
* Rear drive-on slope approx. 860 mm
----Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm
* Option to install 3 t folding lashing brackets every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various drillings for 1.2 t lashing points in front bulkhead and rear end crossmember
----Ramps:
* One-piece, mechanical mesh ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
----Paintwork:
* Hot-dip galvanized chassis as well as tow bar, bulkhead, tailgate, and access ramps
* Sideboard colour in RAL 9010 pure white
* Painting of side walls in alternative RAL colours available at extra cost
----Info:
* --Reinforced and certified body built according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately ex Egestorf
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
----Braking system:
* EBS electronic braking system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Tow bar / Flange eye:
* Tow bar height-adjustable by 300 mm
* Tow bar extension by 250 mm to 2,250 mm
* 40 mm flange towing eye
----Lighting / Electrics:
* RDÜ (tyre pressure monitoring system)
* LED tail lights 12 / 24 V
* 15-pin power connector
----General attachments:
* Jost landing gear front
* Externally mounted, hot-dip galvanized folding supports at rear
* Plastic toolbox, front right, mounted on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
Nkodpfsq Dyvyjx Ahxjw
* 50 mm softwood floor
* Fittings in front of bulkhead for retrofitting container locks
* Bolted flat sheet steel bulkhead
* Drop sides made of trapezoidal-profiled steel sheet, folding with drop side lifting springs
* Rear steel wall retractable between ramp holders, stowable in front of bulkhead when not in use
* Bolted rear stanchions
* Rear drive-on slope approx. 860 mm
----Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm
* Option to install 3 t folding lashing brackets every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various drillings for 1.2 t lashing points in front bulkhead and rear end crossmember
----Ramps:
* One-piece, mechanical mesh ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
----Paintwork:
* Hot-dip galvanized chassis as well as tow bar, bulkhead, tailgate, and access ramps
* Sideboard colour in RAL 9010 pure white
* Painting of side walls in alternative RAL colours available at extra cost
----Info:
* --Reinforced and certified body built according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately ex Egestorf
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
180 Sludinājumi tiešsaistē
Nosūtīt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Egestorf
1 012 km
Zema kravnes piekabe
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Mazā sludinājuma
Nürnberg
1 219 km
Pašizgāzējs 3 puses
HumbaurHTK 185024 UNIVERSAL DREISEITENKIPPER
HumbaurHTK 185024 UNIVERSAL DREISEITENKIPPER
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda





































































