Piekabe ar darba platformuMÜLLER-MITTELTAL
14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Piekabe ar darba platformu
MÜLLER-MITTELTAL
14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
fiksēta cena bez PVN
29 900 €
(35 581 € bruto)
Izgatavošanas gads
2025
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Rādīt attēlus
Rādīt karti
Pamatdati
- Apzīmējums:
- Piekabe ar darba platformu
- Ražotājs:
- MÜLLER-MITTELTAL
- Izgatavošanas gads:
- 2025
- Stāvoklis:
- jauns
Cena un atrašanās vieta
fiksēta cena bez PVN
29 900 €
(35 581 € bruto)
- Atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, DE
Zvanīt
Tehniskā informācija
- Kopējais svars:
- 14 400 kg
- Maksimālā kravnesība:
- 10 800 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 6 270 mm
- Iekraušanas vietas platums:
- 2 470 mm
Piedāvājuma informācija
- Ieraksta ID:
- A152-72-860
- Atsauces Nr.:
- 6247a
- Pēdējoreiz atjaunots:
- 25.6.2460852
Apraksts
* ETÜ-TA-R 14.4:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7 tonnes Gigant axles
* Parabolic springs with compensating unit
* Drawbar height adjustable by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display option in the truck via EBS signal - no truck-side installation required
* Front landing gear
* External folding supports at the rear
* 15-pin power connector
Gsdpfjrwc R Rsx Ag Reuh
* 12/24 V LED lighting system
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrical systems
* Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead
* Side impact protection
* Plastic quarter fenders
* 50 mm softwood floor
* Device for retrofitting control locks in front of the bulkhead
* Bolted 400 mm bulkhead made of smooth sheet metal
* Bolted rear stanchions
* Side walls with Spring jack
* Perforated outer frame, approximately 45 degrees angled, with a 2-ton lashing capacity every 480 mm, installation of 3-ton drop lashing brackets possible every 600 mm, 1 x 6.3-ton lashing ring in each of the front and rear corners, various holes in the front and end beams for 1.2-ton lashing capacity
* One-piece hydraulic grating loading ramps, approximately 2,750 x 600 mm (can be collapsed to within 20 mm)
* Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 liters/min. up to a maximum of 140 liters/min.)
* Chassis, drawbar, front wall, mechanical Hot-dip galvanized drop legs and ramps
* Axles, springs, air chamber, front landing gear, and flanged towing eye painted in a black shade
* Side walls painted in RAL 9010 pure white
* Side walls painted in a RAL color available for an additional charge
* New vehicle with manufacturer's warranty
* Errors and prior sale subject to change
* Available from week 15 of 2025
* Sample images
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7 tonnes Gigant axles
* Parabolic springs with compensating unit
* Drawbar height adjustable by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display option in the truck via EBS signal - no truck-side installation required
* Front landing gear
* External folding supports at the rear
* 15-pin power connector
Gsdpfjrwc R Rsx Ag Reuh
* 12/24 V LED lighting system
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrical systems
* Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead
* Side impact protection
* Plastic quarter fenders
* 50 mm softwood floor
* Device for retrofitting control locks in front of the bulkhead
* Bolted 400 mm bulkhead made of smooth sheet metal
* Bolted rear stanchions
* Side walls with Spring jack
* Perforated outer frame, approximately 45 degrees angled, with a 2-ton lashing capacity every 480 mm, installation of 3-ton drop lashing brackets possible every 600 mm, 1 x 6.3-ton lashing ring in each of the front and rear corners, various holes in the front and end beams for 1.2-ton lashing capacity
* One-piece hydraulic grating loading ramps, approximately 2,750 x 600 mm (can be collapsed to within 20 mm)
* Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 liters/min. up to a maximum of 140 liters/min.)
* Chassis, drawbar, front wall, mechanical Hot-dip galvanized drop legs and ramps
* Axles, springs, air chamber, front landing gear, and flanged towing eye painted in a black shade
* Side walls painted in RAL 9010 pure white
* Side walls painted in a RAL color available for an additional charge
* New vehicle with manufacturer's warranty
* Errors and prior sale subject to change
* Available from week 15 of 2025
* Sample images
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
mazā sludinājuma

1 012 km
Zema kravnes piekabe
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda