Zema kravnes piekabeMÜLLER-MITTELTAL
Agrar Tand. 3- Seiten, hydr. Heckklappe, Rampen
Zema kravnes piekabe
MÜLLER-MITTELTAL
Agrar Tand. 3- Seiten, hydr. Heckklappe, Rampen
fiksēta cena bez PVN
49 950 €
(59 440 € bruto)
Izgatavošanas gads
2024
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Rādīt attēlus
Rādīt karti
Pamatdati
Cena un atrašanās vieta
fiksēta cena bez PVN
49 950 €
(59 440 € bruto)
- Pārdevēja atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Vācija
Zvanīt
Tehniskā informācija
- Kopējais svars:
- 21 000 kg
- Maksimālā kravnesība:
- 16 000 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 5 500 mm
- Iekraušanas vietas platums:
- 2 420 mm
- Iekraušanas telpas augstums:
- 700 mm
Piedāvājuma informācija
- Ieraksta ID:
- A154-46-713
- Atsauces Nr.:
- 6248a
- Pēdējoreiz atjaunots:
- 10.7.2460867
Apraksts
* KA-TA-RT 21.0 ML:
* Without ABS / EBS with 40 km/h approval
* Spring-loaded parking brake, drum brakes
* Gigant axles
* Tandem balancing unit with 100 mm wide parabolic springs
* Support winch at the front
* mech. Fall supports at the rear
* firmly welded drawbar with low-maintenance cap for K80 ball head coupling (can be adjusted by + 77 mm / 33 mm via head plate) with raised boom for the connecting cables
* 12 V 7 + 4-pin power cable
* LED lighting system 12 / 24 V with protective grille
* 2 LED work lights at the rear, switchable from the towing vehicle without installation on the towing vehicle side
* Side marker lights with indicator control
* Plastic quarter fender
* Plastic tool box approx. 750 x 350 x 300 mm on the right side
* Chassis made of fine-grain steel
* Steel pallet 3-way tipping structure with M-Strong side walls (front wall fixed, continuous side walls - without center stanchions - swinging via manual central locking and mechanically foldable with side wall spring lifter
* hydraulic rear wall 500 mm high as hydr. chute and a 115° opening angle
* 4 mm Hardox 450 steel floor
* 1 x 7 tonne lashing eyes in each corner and 4 x 3 tonne lashing eyes on each side - recessed and foldable
Hjdper Dpz Hefx Ag Renu
* Hot-dip galvanised two-step ladder in front of the front wall in FR left)
* 1 pair of aluminium landing ramps (10 tonne / pair with axle distance over 2,500 mm) 3,570 x 410 x 120 mm suitable for rubber-tired and tracked vehicles
* 2 mounting slots for aluminum docking ramps embedded in the chassis from the rear Load securing in accordance with EN 12642 XL
* --Coupling height loaded approx. 530 mm
* unloaded approx. 590 mm--
* Body paint in RAL 9010 pure white
* Chassis, drawbar, rear drop supports, underrun protection hot-dip galvanized
* Axles, air tank, support winch at the front
* K80 coupling painted in a black tone
* New vehicle with manufacturer's warranty
* Errors and prior sale subject to reservation
* Available for immediate delivery from Egestorf
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
* Without ABS / EBS with 40 km/h approval
* Spring-loaded parking brake, drum brakes
* Gigant axles
* Tandem balancing unit with 100 mm wide parabolic springs
* Support winch at the front
* mech. Fall supports at the rear
* firmly welded drawbar with low-maintenance cap for K80 ball head coupling (can be adjusted by + 77 mm / 33 mm via head plate) with raised boom for the connecting cables
* 12 V 7 + 4-pin power cable
* LED lighting system 12 / 24 V with protective grille
* 2 LED work lights at the rear, switchable from the towing vehicle without installation on the towing vehicle side
* Side marker lights with indicator control
* Plastic quarter fender
* Plastic tool box approx. 750 x 350 x 300 mm on the right side
* Chassis made of fine-grain steel
* Steel pallet 3-way tipping structure with M-Strong side walls (front wall fixed, continuous side walls - without center stanchions - swinging via manual central locking and mechanically foldable with side wall spring lifter
* hydraulic rear wall 500 mm high as hydr. chute and a 115° opening angle
* 4 mm Hardox 450 steel floor
* 1 x 7 tonne lashing eyes in each corner and 4 x 3 tonne lashing eyes on each side - recessed and foldable
Hjdper Dpz Hefx Ag Renu
* Hot-dip galvanised two-step ladder in front of the front wall in FR left)
* 1 pair of aluminium landing ramps (10 tonne / pair with axle distance over 2,500 mm) 3,570 x 410 x 120 mm suitable for rubber-tired and tracked vehicles
* 2 mounting slots for aluminum docking ramps embedded in the chassis from the rear Load securing in accordance with EN 12642 XL
* --Coupling height loaded approx. 530 mm
* unloaded approx. 590 mm--
* Body paint in RAL 9010 pure white
* Chassis, drawbar, rear drop supports, underrun protection hot-dip galvanized
* Axles, air tank, support winch at the front
* K80 coupling painted in a black tone
* New vehicle with manufacturer's warranty
* Errors and prior sale subject to reservation
* Available for immediate delivery from Egestorf
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
mazā sludinājuma

1 012 km
Trīspusējā pašizgāzēja piekabe
MÜLLER-MITTELTALAgrar Tand. 3- Seiten, hydr. Heckklappe, Rampen
MÜLLER-MITTELTALAgrar Tand. 3- Seiten, hydr. Heckklappe, Rampen
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda