Trīspusējā pašizgāzēja piekabeMÜLLER-MITTELTAL
KWH 9,9 Kabeltransport-Anhänger mit Benzinmotor
Trīspusējā pašizgāzēja piekabe
MÜLLER-MITTELTAL
KWH 9,9 Kabeltransport-Anhänger mit Benzinmotor
Fiksēta cena plus PVN
36 950 €
(43 970 € bruto)
Ražošanas gads
2026
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Pamatdati
- Apzīmējums:
- Trīspusējā pašizgāzēja piekabe
- Ražotājs:
- MÜLLER-MITTELTAL
- Ražošanas gads:
- 2026
- Stāvoklis:
- jauns
Cena un atrašanās vieta
Fiksēta cena plus PVN
36 950 €
(43 970 € bruto)
- Pārdevēja atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Vācija

Zvanīt
Tehniskā informācija
Izmēri un svars
Kopējais svars:
9 900 kg
Maksimālā kravnesība:
6 870 kg
Asis un riteņi
Asu konfigurācija:
1 ass
Piedāvājuma informācija
- Sludinājuma ID:
- A176-56-228
- Atsauces numurs:
- 61821
- Atjaunināšana:
- pēdējo reizi 06.10.2026
Apraksts
* KWH 9.9 ML:
----Brakes:
* EBS braking system
* Drum brake
* Emergency release device for spring accumulators
----Axle:
* BPW axle
----Suspension:
* Parabolic springs
----Drawbar / Flange coupling:
* Drawbar with 40 mm screwed coupling (height adjustable mm)
----Electrical system / Lighting:
* 15-pole power connector
* LED lighting
* Flashing LED side marker lights
* TPMS tire pressure monitoring system
----General components:
* Front support winch
* Spring-supported square tube supports at the rear with base plate, safety locking pins for different support heights
* Closed fenders made of sheet steel with splash protection
* Closed side impact protection, usable as an advertising surface
* Plastic toolbox with bottom insert (horizontal installation), approx. 500 x 350 x 400 mm
----Superstructure:
* Swiveling cable reel superstructure, width between the reel arms 1,700 mm, with a tensioning mechanism to secure the reel at the ends of the support arms and a locking mechanism for the cable reel superstructure to the chassis via a centrally arranged claw lock
* Motor-hydraulic drum drive with oil motor
* Valves and sliding rubber-coated drive rollers
* Hydraulic speed control and brake for the drum drive
* Steel drum shaft with 76 mm diameter, centering, and rotatable ends
* 1 pair of centering cones made of polyamide, stepped
----Chassis:
* Chassis made of torsion-resistant square tubes and cross members
----Pump unit:
* Pump unit, hydraulically driven with Loncin gasoline engine, including manual and electric starter
Cedpsu I Iqfsfx Aqrehc
* Fuel tank and manual starter
* 13 hp with gear pump (150 bar)
----Tires:
* 315/80 R 22.5
----Unladen weight:
* 2,690 kg unladen weight
----Paint finish:
* Vehicle is hot-dip galvanized
----Information:
* New vehicle with full manufacturer's warranty
* Errors and prior sale excepted
----Delivery time:
* Available from approx. week 49/2026
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
----Brakes:
* EBS braking system
* Drum brake
* Emergency release device for spring accumulators
----Axle:
* BPW axle
----Suspension:
* Parabolic springs
----Drawbar / Flange coupling:
* Drawbar with 40 mm screwed coupling (height adjustable mm)
----Electrical system / Lighting:
* 15-pole power connector
* LED lighting
* Flashing LED side marker lights
* TPMS tire pressure monitoring system
----General components:
* Front support winch
* Spring-supported square tube supports at the rear with base plate, safety locking pins for different support heights
* Closed fenders made of sheet steel with splash protection
* Closed side impact protection, usable as an advertising surface
* Plastic toolbox with bottom insert (horizontal installation), approx. 500 x 350 x 400 mm
----Superstructure:
* Swiveling cable reel superstructure, width between the reel arms 1,700 mm, with a tensioning mechanism to secure the reel at the ends of the support arms and a locking mechanism for the cable reel superstructure to the chassis via a centrally arranged claw lock
* Motor-hydraulic drum drive with oil motor
* Valves and sliding rubber-coated drive rollers
* Hydraulic speed control and brake for the drum drive
* Steel drum shaft with 76 mm diameter, centering, and rotatable ends
* 1 pair of centering cones made of polyamide, stepped
----Chassis:
* Chassis made of torsion-resistant square tubes and cross members
----Pump unit:
* Pump unit, hydraulically driven with Loncin gasoline engine, including manual and electric starter
Cedpsu I Iqfsfx Aqrehc
* Fuel tank and manual starter
* 13 hp with gear pump (150 bar)
----Tires:
* 315/80 R 22.5
----Unladen weight:
* 2,690 kg unladen weight
----Paint finish:
* Vehicle is hot-dip galvanized
----Information:
* New vehicle with full manufacturer's warranty
* Errors and prior sale excepted
----Delivery time:
* Available from approx. week 49/2026
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
173 Sludinājumi tiešsaistē
Nosūtīt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Veiksmīgs
Jūsu ziņojums ir nosūtīts.
Mazā sludinājuma
Egestorf
1 012 km
Piekabe
MÜLLER-MITTELTALKWH 9,9 Kabeltransport-Anhänger mit Benzinmotor
MÜLLER-MITTELTALKWH 9,9 Kabeltransport-Anhänger mit Benzinmotor
Veiksmīgs
Jūsu ziņojums ir nosūtīts.
Mazā sludinājuma
Goldbach
1 274 km
Mini ekskavators
TakeuchiTB320 V3 Powertilt 3 Löffel
TakeuchiTB320 V3 Powertilt 3 Löffel
Veiksmīgs
Jūsu ziņojums ir nosūtīts.
Mazā sludinājuma
Eilenburg
981 km
Miniekskavators
VOLVOEC35D Minibagger
VOLVOEC35D Minibagger
Veiksmīgs
Jūsu ziņojums ir nosūtīts.
Mazā sludinājuma
Atzenhain
1 235 km
Miniekskavators
KUBOTAKX080 KX080-3 Verstellausleger Tilt Motor Neu
KUBOTAKX080 KX080-3 Verstellausleger Tilt Motor Neu
Veiksmīgs
Jūsu ziņojums ir nosūtīts.
Mazā sludinājuma
Delbrück
1 184 km
Miniekskavators
DoosanKettenbagger DX 63-3 PowerTilt 070
DoosanKettenbagger DX 63-3 PowerTilt 070
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda





























































































































































