Lopkopības piekabeSchlögl Fahrzeugbau
SV 35 40 18 AB
Lopkopības piekabe
Schlögl Fahrzeugbau
SV 35 40 18 AB
fiksēta cena bez PVN
21 000 €
(24 990 € bruto)
Stāvoklis
Jauns
Atrašanās vieta
Pfarrkirchen 

Rādīt attēlus
Rādīt karti
Pamatdati
Cena un atrašanās vieta
fiksēta cena bez PVN
21 000 €
(24 990 € bruto)
- Atrašanās vieta:
- Indutriestr. 6, 84347 Pfarrkirchen, DE

Zvanīt
Tehniskā informācija
- Tukšais svars:
- 1 350 kg
- Kopējais svars:
- 3 500 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 3 980 mm
- Iekraušanas vietas platums:
- 1 800 mm
- Iekraušanas telpas augstums:
- 1 870 mm
- Riepas izmērs:
- 225/70 R15 C
Piedāvājuma informācija
- Ieraksta ID:
- A177-84-876
- Pēdējoreiz atjaunots:
- 22.11.2460637
Apraksts
Tandem livestock trailer, make: Schlögl Fahrzeugbau, type: SV 35 39 18 AB, internal dimensions approx. (LxWxH): 3980 x 1800 x 1870 mm, gross vehicle weight rating: 3500 kg, axle load: 3600 kg
Equipment:
- Chassis with reinforced, maintenance-free rubber spring axles 2x 1800 kg (axle load 3600 kg)
- 225/70 R15 C tires
- Axle shock absorbers for improved handling
- Aluminum checker plate mudguards with mud flaps
- Galvanized V-drawbar
- Overrun brake with automatic reverse and ball clutch
- Reinforced automatic support wheel with solid rubber tires and metal rim (load capacity approx. 500 kg)
- 12V lighting system with 13-pin plug and reversing lights
- LED position lights red/white
- LED marker lights white
- LED interior light with button
- Additional LED reversing light
- Sturdy frame made of high-quality steel profile, completely hot-dip galvanized
Prsdpfeu T Ebpox Abbsc
- Side walls made of double-walled aluminum profile 25 mm thick, blank
- 1x top front ventilation flap, approx. 1450 x 230 mm
- 2x ventilation flaps at the top of each side, approx. 1200 x 230 mm
- all ventilation flaps each with V2A hinges and tongue locks
- Continuous tie rod at the front inside
- 1x maneuvering handle on the outside of the body
- Body with side door front left
- Aluminum partition wall approx. 1500 mm, with quick-release fastener and adjustment rail
- Aluminum checker plate floor folded up at the sides and welded to the walls to form a trough
- Special rubber coating with integrated climbing rails on rear tailgate
- Ramp lifter/ tension spring for rear tailgate
- 1 set of swing-out gates for rear tailgate, approx. 1350 mm from vehicle floor
- Lifting aid and locking mechanism for swing-out gate
- Dibond Iso flat roof
All of our own products are custom-made and are specially manufactured to customer specifications. The size and equipment can of course be adapted to your individual requirements.
(Illustrations may contain accessories subject to a surcharge! Misprints, changes and errors excepted!)
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Equipment:
- Chassis with reinforced, maintenance-free rubber spring axles 2x 1800 kg (axle load 3600 kg)
- 225/70 R15 C tires
- Axle shock absorbers for improved handling
- Aluminum checker plate mudguards with mud flaps
- Galvanized V-drawbar
- Overrun brake with automatic reverse and ball clutch
- Reinforced automatic support wheel with solid rubber tires and metal rim (load capacity approx. 500 kg)
- 12V lighting system with 13-pin plug and reversing lights
- LED position lights red/white
- LED marker lights white
- LED interior light with button
- Additional LED reversing light
- Sturdy frame made of high-quality steel profile, completely hot-dip galvanized
Prsdpfeu T Ebpox Abbsc
- Side walls made of double-walled aluminum profile 25 mm thick, blank
- 1x top front ventilation flap, approx. 1450 x 230 mm
- 2x ventilation flaps at the top of each side, approx. 1200 x 230 mm
- all ventilation flaps each with V2A hinges and tongue locks
- Continuous tie rod at the front inside
- 1x maneuvering handle on the outside of the body
- Body with side door front left
- Aluminum partition wall approx. 1500 mm, with quick-release fastener and adjustment rail
- Aluminum checker plate floor folded up at the sides and welded to the walls to form a trough
- Special rubber coating with integrated climbing rails on rear tailgate
- Ramp lifter/ tension spring for rear tailgate
- 1 set of swing-out gates for rear tailgate, approx. 1350 mm from vehicle floor
- Lifting aid and locking mechanism for swing-out gate
- Dibond Iso flat roof
All of our own products are custom-made and are specially manufactured to customer specifications. The size and equipment can of course be adapted to your individual requirements.
(Illustrations may contain accessories subject to a surcharge! Misprints, changes and errors excepted!)
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 8561 ... sludinājumi
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda












