Autotransportiera piekabeNEPTUN
NEPTUN Multi N7-255 GN151 Unitransporter
Autotransportiera piekabe
NEPTUN
NEPTUN Multi N7-255 GN151 Unitransporter
fiksēta cena bez PVN
1 049 €
(1 248 € bruto)
Stāvoklis
Jauns
Atrašanās vieta
Oelsnitz/Vogtl. 

Rādīt attēlus
Rādīt karti
Pamatdati
Cena un atrašanās vieta
fiksēta cena bez PVN
1 049 €
(1 248 € bruto)
- Atrašanās vieta:
- Willy-Brandt-Ring 6, 08606 Oelsnitz/Vogtland, Deutschland

Zvanīt
Tehniskā informācija
- Tukšais svars:
- 197 kg
- Maksimālā kravnesība:
- 553 kg
- Kopējais svars:
- 750 kg
- Asu konfigurācija:
- 1 ass
- Krautuves garums:
- 2 550 mm
- Iekraušanas vietas platums:
- 1 660 mm
- Iekraušanas telpas augstums:
- 100 mm
- Riepas izmērs:
- 155/70R13
Piedāvājuma informācija
- Ieraksta ID:
- A190-67-336
- Pēdējoreiz atjaunots:
- 07.5.2460803
Apraksts
Neptun Multi N7-255 750 kg
- NEW VEHICLE -
Tipping Multi-Purpose Carrier - Model GN151
Technical Specifications:
Kjdpfx Agowg Rrkjgefa
Maximum Load Total weight 750 kg
Payload 553 kg
Own weight 197 kg
Unbraked, single-axle
Interior dimensions 255 x 166 cm
Overall dimensions 366 x 236 x 90 cm
Tires 155/70R13
Loading height approx. 45 cm
Construction and equipment:
Hot-dip galvanized drawbar
Gas lift for body
Galvanized ladder frame, screen-printed floor
6 extendable lashing eyes embedded in the side of the floor frame profile
Rubber-sprung axle with independent wheel suspension - maintenance-free
Brand-new tires
Manual tipping device for minimal loading angle, tension lock at the front
Direct contact with the rear floor support, very low ramp
Galvanized sheet steel side boards on three sides, 100 mm high
Taillight units with multi-function lights on the side of the loading area
License plate holder Foldable
Black plastic fenders (image may vary)
Front auxiliary lights
Electrics 12V - 7-pin connector
Installation/Extension options (extra charge):
Rear ramp (set with brackets and swivel bracket for license plates) - continuous across the entire width - also ideal for multi-track vehicles - 300 mm high (long)
Side wall kit 200 mm (> 3 sides 10 + 20 = 30 cm, flush with the ramp height)
Leaf grille kit 800 mm (can be used directly or on the side wall/rear ramp)
> Interior height with side wall extension, ramp, and leaf grille 30 + 80 = 110 cm
Crank spindle for easy loading of multiple vehicles
Additional accessories, e.g. (prices upon request):
Joint wheel
13-inch spare wheel
Spare wheel holder on drawbar
Front cable winch
13-pin connector Installed
13-pin to 7-pin Mini adapter
100 km/h approval / load rating
! See many more trailers >>> trelex.de!
* Financing and trade-in available!
* Huge selection: Over 300 trailers always in stock, come by!
* Competent and fair advice, fast processing.
* Questions? Just call!
NOTE: No immediate pickup possible without pre-order!
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
- NEW VEHICLE -
Tipping Multi-Purpose Carrier - Model GN151
Technical Specifications:
Kjdpfx Agowg Rrkjgefa
Maximum Load Total weight 750 kg
Payload 553 kg
Own weight 197 kg
Unbraked, single-axle
Interior dimensions 255 x 166 cm
Overall dimensions 366 x 236 x 90 cm
Tires 155/70R13
Loading height approx. 45 cm
Construction and equipment:
Hot-dip galvanized drawbar
Gas lift for body
Galvanized ladder frame, screen-printed floor
6 extendable lashing eyes embedded in the side of the floor frame profile
Rubber-sprung axle with independent wheel suspension - maintenance-free
Brand-new tires
Manual tipping device for minimal loading angle, tension lock at the front
Direct contact with the rear floor support, very low ramp
Galvanized sheet steel side boards on three sides, 100 mm high
Taillight units with multi-function lights on the side of the loading area
License plate holder Foldable
Black plastic fenders (image may vary)
Front auxiliary lights
Electrics 12V - 7-pin connector
Installation/Extension options (extra charge):
Rear ramp (set with brackets and swivel bracket for license plates) - continuous across the entire width - also ideal for multi-track vehicles - 300 mm high (long)
Side wall kit 200 mm (> 3 sides 10 + 20 = 30 cm, flush with the ramp height)
Leaf grille kit 800 mm (can be used directly or on the side wall/rear ramp)
> Interior height with side wall extension, ramp, and leaf grille 30 + 80 = 110 cm
Crank spindle for easy loading of multiple vehicles
Additional accessories, e.g. (prices upon request):
Joint wheel
13-inch spare wheel
Spare wheel holder on drawbar
Front cable winch
13-pin connector Installed
13-pin to 7-pin Mini adapter
100 km/h approval / load rating
! See many more trailers >>> trelex.de!
* Financing and trade-in available!
* Huge selection: Over 300 trailers always in stock, come by!
* Competent and fair advice, fast processing.
* Questions? Just call!
NOTE: No immediate pickup possible without pre-order!
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2013
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 37421... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Seesen
1 087 km
Automašīnu pārvadātājs
MAN12.250 TGL mit Anhänger für 5 PKW / VERFÜGBAR
MAN12.250 TGL mit Anhänger für 5 PKW / VERFÜGBAR
Mazā sludinājuma
Neu-Ulm
1 360 km
Autopiekabe
NeptunGN152, N7-305 multi, 750 kg 3050 x 1660 x 100 mm
NeptunGN152, N7-305 multi, 750 kg 3050 x 1660 x 100 mm
Mazā sludinājuma
Freiberg/N
1 354 km
Motocikla piekabe
LORRIESMT-2 Motorradanhänger 750 kg absenkbar, 2x Wippe
LORRIESMT-2 Motorradanhänger 750 kg absenkbar, 2x Wippe
Mazā sludinājuma
Nieder-Olm
1 333 km
Automašīnas piekabe
NeptunPratik 2,02x1,14m 750kg Extras GN103
NeptunPratik 2,02x1,14m 750kg Extras GN103
Mazā sludinājuma
Nieder-Olm
1 333 km
Automašīnas piekabe
NeptunPratik 2,36x1,29x0,30m 750kg GN126
NeptunPratik 2,36x1,29x0,30m 750kg GN126
Mazā sludinājuma
Nieder-Olm
1 333 km
Motocikla piekabe
NeptunMoto PM3 für drei Motorräder 750kg GN202
NeptunMoto PM3 für drei Motorräder 750kg GN202
Mazā sludinājuma
Friedrichsdorf
1 281 km
Bezceļu iekrāvējs
ManitouMSI 25 D K ST5 S1
ManitouMSI 25 D K ST5 S1
Mazā sludinājuma
Neu-Ulm
1 360 km
Motociklu piekabe
NeptunMotorradanhänger GN202, N7-221 pm3, 100 km/h 0,75 t. 2250 x 1485 x 31 mm
NeptunMotorradanhänger GN202, N7-221 pm3, 100 km/h 0,75 t. 2250 x 1485 x 31 mm
Mazā sludinājuma
Groenlo
1 278 km
Visurgājējs iekrāvējs
ManitouMC25-4 Valid Inspection, *Guarantee, Diesel, 4x4
ManitouMC25-4 Valid Inspection, *Guarantee, Diesel, 4x4
Mazā sludinājuma
Neu-Ulm
1 360 km
Autopiekabe
NeptunGN151, N7-255 multi, 750 kg 2550 x 1660 x 100 mm
NeptunGN151, N7-255 multi, 750 kg 2550 x 1660 x 100 mm
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda











































































































































