Pašizgāzēja piekabePartenheimer
Rückwärtskipper 2600 KG
Pašizgāzēja piekabe
Partenheimer
Rückwärtskipper 2600 KG
fiksēta cena bez PVN
6 436 €
(7 659 € bruto)
Stāvoklis
Jauns
Atrašanās vieta
Roxheim 

Rādīt attēlus
Rādīt karti
Pamatdati
Cena un atrašanās vieta
fiksēta cena bez PVN
6 436 €
(7 659 € bruto)
- Atrašanās vieta:
- Rüdesheimer Straße 19, 55595 Roxheim, Deutschland

Zvanīt
Tehniskā informācija
- Tukšais svars:
- 780 kg
- Kopējais svars:
- 2 600 kg
- Krautuves garums:
- 2 700 mm
- Iekraušanas vietas platums:
- 1 350 mm
- Iekraušanas telpas augstums:
- 370 mm
Piedāvājuma informācija
- Ieraksta ID:
- A191-50-346
- Pēdējoreiz atjaunots:
- 16.5.2460812
Apraksts
100% Made in Germany
Pre-order vehicle!!!
Ltsdpfx Aewkqumeggsa
Basic equipment:
− Rubber spring tandem axle, each 1300 kg
− Body width 1350 mm
− Body length 2700 mm
− Rigid ball coupling - ball center approx. 430 mm
− 4x 185 R14C tires
− 2x NATO fenders
− Wheel shock absorbers for 100 km/h
− Automatic support wheel
− 2x galvanized wheel chocks
− Exterior completely painted with 2K paint as desired
− Industrial wooden floor 18 mm solid birch, screen-printed
− Stainless steel net hooks in the side, head, and rear walls
− Swing tailgate
− 4 side lashings
− Tipping device with hand pump, cylinder, and tilt bearing
− Integrated 12V 13-pin lighting with interior light
− TÜV certificate for New vehicle
Base frame made of 3 mm sheet steel with fully welded cross tubes, and fully welded corner stanchions made of 60x60 mm steel. All parts are hot-dip galvanized. The floor is made of 18 mm solid briquette industrial plywood. The fenders are made of 2 mm sheet steel, hot-dip galvanized, and fully walkable.
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Pre-order vehicle!!!
Ltsdpfx Aewkqumeggsa
Basic equipment:
− Rubber spring tandem axle, each 1300 kg
− Body width 1350 mm
− Body length 2700 mm
− Rigid ball coupling - ball center approx. 430 mm
− 4x 185 R14C tires
− 2x NATO fenders
− Wheel shock absorbers for 100 km/h
− Automatic support wheel
− 2x galvanized wheel chocks
− Exterior completely painted with 2K paint as desired
− Industrial wooden floor 18 mm solid birch, screen-printed
− Stainless steel net hooks in the side, head, and rear walls
− Swing tailgate
− 4 side lashings
− Tipping device with hand pump, cylinder, and tilt bearing
− Integrated 12V 13-pin lighting with interior light
− TÜV certificate for New vehicle
Base frame made of 3 mm sheet steel with fully welded cross tubes, and fully welded corner stanchions made of 60x60 mm steel. All parts are hot-dip galvanized. The floor is made of 18 mm solid briquette industrial plywood. The fenders are made of 2 mm sheet steel, hot-dip galvanized, and fully walkable.
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2025
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 671 2... sludinājumi
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda




















