Zema kravnes piekabeMÜLLER-MITTELTAL
3 Seitenkip.- Strongw., 10 to Ram, Sonderpreis
Zema kravnes piekabe
MÜLLER-MITTELTAL
3 Seitenkip.- Strongw., 10 to Ram, Sonderpreis
fiksēta cena bez PVN
33 000 €
(39 270 € bruto)
Izgatavošanas gads
2026
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Rādīt attēlus
Rādīt karti
Pamatdati
Cena un atrašanās vieta
fiksēta cena bez PVN
33 000 €
(39 270 € bruto)
- Pārdevēja atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Vācija

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 10 800 kg
- Kopējais svars:
- 14 400 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 5 000 mm
- Iekraušanas vietas platums:
- 2 420 mm
- Iekraušanas telpas augstums:
- 600 mm
Piedāvājuma informācija
- Ieraksta ID:
- A207-53-282
- Atsauces Nr.:
- 61571
- Pēdējoreiz atjaunots:
- 13.12.2461023
Apraksts
* KA-TA-R 14.4:
* Wabco EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Tire pressure monitoring with display possibility in the truck via EBS signal – no vehicle-side installation required
* Drum brakes
* 2 x 7 t Gigant axles
* Parabolic springs with tandem equalizing unit
* Height-adjustable drawbar, adjustable by 300 mm with 40 mm flange towing eye
* Jost mechanical support leg at the front
* Two mechanical folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right front side of the chassis
* 15-pin electrical connector
* LED tail lights 12/24 V
* Bolt-on rear underrun protection
* Plastic quarter mudguards
* Lashing hooks at the central locking mounts and two units at the front wall
* Chassis made of fine-grain steel
* Steel pallet body, 3-way tipper with reinforced Strong side boards (continuous upper side walls with internal tube reinforcement – no center stanchions – foldable with board spring assist)
* Rear stanchions bolted
* Combination steel double wing doors, asymmetrically split at the rear, can swing and be locked at 270° – non-foldable – plus an additional swing frame for automatic rear tailgate opening during tipping, rear lock by galvanized rotary bar lock and central locking, deactivation function for auto tailgate during reverse tipping with an open wing door
* In each corner 1 x 5 t lashing point, and in each side 4 x 3 t lashing rings recessed in the outer frame
* 4 mm floor plate made of fine-grain steel
* Rear mounting rail for loading ramps
* Reinforced body with load securing certificate
* 1 pair of aluminum ramps approx. 3570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles
* Rear lockable storage box recessed under the loading area in the chassis for the ramps
* Drawbar, underrun protection, rear stanchion, and rear folding supports hot-dip galvanized
* Axles, springs, air tank, and support leg painted black
* Tires: 358/55 R 19.5
* Side boards painted in RAL 9010 pure white
* Painting of side walls in any RAL color available at extra charge
* Subject to errors and prior sale
Gjdpfxex Hm Rcs Afteca
* Available immediately from week 10/2026
* Sample images
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
* Wabco EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Tire pressure monitoring with display possibility in the truck via EBS signal – no vehicle-side installation required
* Drum brakes
* 2 x 7 t Gigant axles
* Parabolic springs with tandem equalizing unit
* Height-adjustable drawbar, adjustable by 300 mm with 40 mm flange towing eye
* Jost mechanical support leg at the front
* Two mechanical folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right front side of the chassis
* 15-pin electrical connector
* LED tail lights 12/24 V
* Bolt-on rear underrun protection
* Plastic quarter mudguards
* Lashing hooks at the central locking mounts and two units at the front wall
* Chassis made of fine-grain steel
* Steel pallet body, 3-way tipper with reinforced Strong side boards (continuous upper side walls with internal tube reinforcement – no center stanchions – foldable with board spring assist)
* Rear stanchions bolted
* Combination steel double wing doors, asymmetrically split at the rear, can swing and be locked at 270° – non-foldable – plus an additional swing frame for automatic rear tailgate opening during tipping, rear lock by galvanized rotary bar lock and central locking, deactivation function for auto tailgate during reverse tipping with an open wing door
* In each corner 1 x 5 t lashing point, and in each side 4 x 3 t lashing rings recessed in the outer frame
* 4 mm floor plate made of fine-grain steel
* Rear mounting rail for loading ramps
* Reinforced body with load securing certificate
* 1 pair of aluminum ramps approx. 3570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles
* Rear lockable storage box recessed under the loading area in the chassis for the ramps
* Drawbar, underrun protection, rear stanchion, and rear folding supports hot-dip galvanized
* Axles, springs, air tank, and support leg painted black
* Tires: 358/55 R 19.5
* Side boards painted in RAL 9010 pure white
* Painting of side walls in any RAL color available at extra charge
* Subject to errors and prior sale
Gjdpfxex Hm Rcs Afteca
* Available immediately from week 10/2026
* Sample images
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Egestorf
1 012 km
Trīspusējā pašizgāzēja piekabe
MÜLLER-MITTELTAL3 Seitenkip.- Strongw., 10 to Ram, Sonderpreis
MÜLLER-MITTELTAL3 Seitenkip.- Strongw., 10 to Ram, Sonderpreis
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda
































































