Trīspusējā pašizgāzēja piekabeMÜLLER-MITTELTAL
18 to, Luft, Seitliche ALU Wände, Rollplane
Trīspusējā pašizgāzēja piekabe
MÜLLER-MITTELTAL
18 to, Luft, Seitliche ALU Wände, Rollplane
Fiksēta cena plus PVN
34 500 €
(41 055 € bruto)
Ražošanas gads
2026
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Pamatdati
- Apzīmējums:
- Trīspusējā pašizgāzēja piekabe
- Ražotājs:
- MÜLLER-MITTELTAL
- Ražošanas gads:
- 2026
- Stāvoklis:
- jauns
Cena un atrašanās vieta
Fiksēta cena plus PVN
34 500 €
(41 055 € bruto)
- Pārdevēja atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Vācija

Zvanīt
Tehniskā informācija
Izmēri un svars
Kopējais svars:
18 000 kg
Maksimālā kravnesība:
13 610 kg
Krautuves garums:
4 995 mm
Iekraušanas vietas platums:
2 380 mm
Iekraušanas telpas augstums:
900 mm
Asis un riteņi
Asu konfigurācija:
2 asis
Piedāvājuma informācija
- Sludinājuma ID:
- A207-87-252
- Atsauces numurs:
- 6317
- Atjaunināšana:
- pēdējo reizi 05.11.2026
Apraksts
* KA-TA-R 18
----Brakes:
* EBS-E (electronic braking system with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 9 ton Gigant axles
----Suspension:
* Air suspension with leveling during tipping
----Electrical System / Lighting:
* Tire pressure monitoring system with display option on the truck display via EBS signal - without truck-side installation -
* 15-pin power socket
* LED lighting with galvanized protective roof
* 2 LED reversing lights
----Fifth Wheel Coupling / Drawbar:
* Drawbar with 50 mm fifth wheel coupling (adjustable by +77 mm and -33 mm via offset plate)
----General Components:
* Front support jack
* Foldable, galvanized steel under-run protection for paver loading
* Closed plastic individual fenders
* Front panel platform made of grating with a step on the drawbar and handrails on the front panel
----Chassis:
* Chassis made of fine-grain steel
----Tipping Body:
* Steel 3-sided tipping body with aluminum side walls, asymmetrical - continuous without a center beam - pivoting via manual central locking, and foldable on the left with a side wall spring lift
* Rear wall - made of HBW 400 steel - pivoting via automatic 2-claw locking system
* 5 mm steel floor made of HBW 450 steel
----Load Securing:
Hodpsx Ipbyofx Amvsnw
* 4 x 3 ton lashing points on each side - recessed and foldable - embedded in the steel floor
----Covering Tarpaulin:
* Covering tarpaulin - agate gray, similar to RAL 7038 -
* Tarpaulin tensioning by means of ratchet straps on the sides and elastic straps at the front and rear
----Painting:
* Chassis, under-run protection, front panel and drawbar hot-dip galvanized
* Axles, air tank, support jack, fifth wheel coupling painted in a black tone
* Painting of the side walls in a RAL color of your choice (no special or metallic paints), can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced and certified body according to EN 12642 XL incl. load securing certificate up to 19 tons.
* New vehicle without initial registration with manufacturer's warranty
* Errors and prior sale subject to change
----Delivery Time:
* Available for immediate delivery from Egestorf
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
----Brakes:
* EBS-E (electronic braking system with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 9 ton Gigant axles
----Suspension:
* Air suspension with leveling during tipping
----Electrical System / Lighting:
* Tire pressure monitoring system with display option on the truck display via EBS signal - without truck-side installation -
* 15-pin power socket
* LED lighting with galvanized protective roof
* 2 LED reversing lights
----Fifth Wheel Coupling / Drawbar:
* Drawbar with 50 mm fifth wheel coupling (adjustable by +77 mm and -33 mm via offset plate)
----General Components:
* Front support jack
* Foldable, galvanized steel under-run protection for paver loading
* Closed plastic individual fenders
* Front panel platform made of grating with a step on the drawbar and handrails on the front panel
----Chassis:
* Chassis made of fine-grain steel
----Tipping Body:
* Steel 3-sided tipping body with aluminum side walls, asymmetrical - continuous without a center beam - pivoting via manual central locking, and foldable on the left with a side wall spring lift
* Rear wall - made of HBW 400 steel - pivoting via automatic 2-claw locking system
* 5 mm steel floor made of HBW 450 steel
----Load Securing:
Hodpsx Ipbyofx Amvsnw
* 4 x 3 ton lashing points on each side - recessed and foldable - embedded in the steel floor
----Covering Tarpaulin:
* Covering tarpaulin - agate gray, similar to RAL 7038 -
* Tarpaulin tensioning by means of ratchet straps on the sides and elastic straps at the front and rear
----Painting:
* Chassis, under-run protection, front panel and drawbar hot-dip galvanized
* Axles, air tank, support jack, fifth wheel coupling painted in a black tone
* Painting of the side walls in a RAL color of your choice (no special or metallic paints), can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced and certified body according to EN 12642 XL incl. load securing certificate up to 19 tons.
* New vehicle without initial registration with manufacturer's warranty
* Errors and prior sale subject to change
----Delivery Time:
* Available for immediate delivery from Egestorf
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
158 Sludinājumi tiešsaistē
Nosūtīt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Veiksmīgs
Jūsu ziņojums ir nosūtīts.
Mazā sludinājuma
Bobenheim - Roxheim
1 348 km
Trīspusējā pašizgāzēja piekabe
SCHWARZMÜLLER2Z 2 Achs Tandem Kippanhänger -MIETE-
SCHWARZMÜLLER2Z 2 Achs Tandem Kippanhänger -MIETE-
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda











































































