PiekabeMÜLLER-MITTELTAL
3-achs Plateu Anhänger, mit 3 Kabelböcken
Piekabe
MÜLLER-MITTELTAL
3-achs Plateu Anhänger, mit 3 Kabelböcken
fiksēta cena bez PVN
56 500 €
(67 235 € bruto)
Izgatavošanas gads
2026
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Rādīt attēlus
Rādīt karti
Pamatdati
Cena un atrašanās vieta
fiksēta cena bez PVN
56 500 €
(67 235 € bruto)
- Pārdevēja atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Vācija

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 18 000 kg
- Kopējais svars:
- 24 000 kg
- Asu konfigurācija:
- 3 asis
- Krautuves garums:
- 9 230 mm
- Iekraušanas vietas platums:
- 2 480 mm
Piedāvājuma informācija
- Ieraksta ID:
- A208-17-157
- Atsauces Nr.:
- 6306
- Pēdējoreiz atjaunots:
- 23.12.2461033
Apraksts
* TP 30.0 with 3 cable drum mounts
----Braking system:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring actuators
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with lift and lowering function
----Drawbar:
* Drawbar 1,800 mm long with 40 mm towing eye
----Electrics / Lighting:
* Tire pressure monitoring system with display capability in the truck dashboard via EBS signal (no truck-side installation required)
* 15-pin power connector
* 2 additional LED reversing lights (activated via reverse gear)
* LED lighting
----General attachments:
* Aluminum air tank
* Stainless steel side toolbox approx. 1,000 x 300 x 600 mm
* Lateral underrun protection
* Plastic quarter mudguards
* Rear underrun protection
----Platform:
* Zurr-fix external frame, 45° bent, perforated for lashings, lashing force per point 2,000 kg at a spacing of 480 mm
* Optional installation of 3,000 kg folding lashing brackets at approx. 600 mm intervals – 12 units of 3,000 kg lashing brackets supplied on each side
* 5 pockets per side in the external frame for posts 100 x 50 mm – posts not included
* 30 mm screen-printed plywood floor
----Drum mounts:
* 3 zinc-plated drum mounts, secured via container lockings, with side forklift pockets center/center 800 mm (pocket width 185 mm)
* Max. drum diameter 2,600 mm, max. drum width 1,650 mm
* Clear width between supports approx. 1,775 mm, with cross tie bar
* Max. drum weight per mount 6,000 kg
* Without drive and drum brake
* Support arm with tension lock for securing the drum spindle
* Steel drum spindle, 76 mm diameter with centering and rotating ends
* 2 clamping rings
* 2 centering cones made of polyamide
* 4 pieces 3.2 t lashing eyes on supports for customer-side securing of drums against rotation and uncoiling
----Loading height:
* Approx. 1,040 mm loaded
----Paintwork:
* Chassis, bogie, drawbar, exterior frame, underrun protection hot-dip galvanized
* Axles painted in black
----Notes:
* Technical gross weight up to 30 t possible
Lodpfxex Nlkgj Aggsak
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Immediately available from Egestorf
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
----Braking system:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring actuators
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with lift and lowering function
----Drawbar:
* Drawbar 1,800 mm long with 40 mm towing eye
----Electrics / Lighting:
* Tire pressure monitoring system with display capability in the truck dashboard via EBS signal (no truck-side installation required)
* 15-pin power connector
* 2 additional LED reversing lights (activated via reverse gear)
* LED lighting
----General attachments:
* Aluminum air tank
* Stainless steel side toolbox approx. 1,000 x 300 x 600 mm
* Lateral underrun protection
* Plastic quarter mudguards
* Rear underrun protection
----Platform:
* Zurr-fix external frame, 45° bent, perforated for lashings, lashing force per point 2,000 kg at a spacing of 480 mm
* Optional installation of 3,000 kg folding lashing brackets at approx. 600 mm intervals – 12 units of 3,000 kg lashing brackets supplied on each side
* 5 pockets per side in the external frame for posts 100 x 50 mm – posts not included
* 30 mm screen-printed plywood floor
----Drum mounts:
* 3 zinc-plated drum mounts, secured via container lockings, with side forklift pockets center/center 800 mm (pocket width 185 mm)
* Max. drum diameter 2,600 mm, max. drum width 1,650 mm
* Clear width between supports approx. 1,775 mm, with cross tie bar
* Max. drum weight per mount 6,000 kg
* Without drive and drum brake
* Support arm with tension lock for securing the drum spindle
* Steel drum spindle, 76 mm diameter with centering and rotating ends
* 2 clamping rings
* 2 centering cones made of polyamide
* 4 pieces 3.2 t lashing eyes on supports for customer-side securing of drums against rotation and uncoiling
----Loading height:
* Approx. 1,040 mm loaded
----Paintwork:
* Chassis, bogie, drawbar, exterior frame, underrun protection hot-dip galvanized
* Axles painted in black
----Notes:
* Technical gross weight up to 30 t possible
Lodpfxex Nlkgj Aggsak
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Immediately available from Egestorf
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Egestorf
1 012 km
Piekabe ar darba platformu
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Mazā sludinājuma
Egestorf
1 012 km
Piekabe
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda









































































