Zema kravnes piekabe

HÜFFERMANN HPA 2072 Tieflader Abroller Rampen FullOptionNEU

WhatsApp
HÜFFERMANN HAP 20.72 MultiCarrier Full Option, arc-galvanized!!!

Features:
Permissible total weight: 18 t
Technical total weight: 20 t
Unladen weight: approx. 5,096 t (+/- DIN tolerance)
Dimensions
Frame length: approx. 7,200 mm, container internal length 6,000 – 7,000 mm + wheel vehicles
Maximum overall width: 2,550 mm
Container resting height (in driving position): approx. 950 mm
Type HPA 2072, twin tires
Welded steel frame construction made from high-strength steel S700
Chassis for rear loading
Load securing with pneumatic low-tension lock with 4 claws,
Clamping force 2.5 t per claw, operation on the trailer, left side in direction of travel
1 removable roller stop as variable container stop
Integrated lashing rail on the outer frame for screw-in lashing rings
6 pairs of lashing holes in the front area of the outer frame
Rear bevel cut with ramp stowage compartment incl. steel plate cover
Low-maintenance, sealed ball-bearing slewing ring
Hanging rail for aluminum loading ramps (WITHOUT RAMPS)
2 pairs of 5 t lashing rings welded on at the front of the platform, embedded in the floor at the rear!
8 pairs of bolted 3 t lashing shackles evenly distributed on the outer frame
Towing Equipment
Telescopic drawbar, adjustable 6 x 100 mm, with 40 mm DIN eye, straight towing eye, D-value 125 kN, for twin-tyre chassis
Drawbar retaining spring with tensioner
Truck coupling height from 635 mm to 835 mm
Drawbar length: 2,000–2,600 mm
BPW EcoPlus low-loader axles with drum brakes, S-cam brakes 300/200 mm, load capacity 10 t/axle, 17.5" twin tires, automatic slack adjusters
8 tires 235/75 R 17.5, 141J
8 steel rims 6.75 x 17.5, with offset, silver
Black plastic wheel nut covers
Brake system according to ECE-R13
Two-line compressed air brake system
Brake system manufacturer Wabco
EBS system 4S3M, sensors on 1st & 2nd axle
Electronic brake and stability system EBS-E and RSS or TEBS G2 and RSP
Spring-actuated parking brake on 2nd axle
Aluminum air tank
Brake/air supply lines with Duomatic quick coupling
EBS/ABS connection cable
Bracket for EBS and electric plug at the drawbar
Air suspension with lift and lower function, separately operated front and rear via 2 rotary lever valves
Automatic setting to programmed ride height above 15 km/h
Schwarzmüller Intelligent Telematics
Weight detection/axle load display via EBS CAN bus signal, display in truck cabin
(Truck must be suitably equipped, not for calibrated weighing)
Tire pressure monitoring according to ECE-Regulation 141, with pressure sensors in wheels
Acoustic reverse warning system/signal, activated via reverse gear
24-volt lighting system according to ECE-R48
Fully LED multi-chamber tail lights "Aspöck EcoLED III"
Dodpfx Aaeyh Sl Doxsun
LED position lights at front
LED outline marker lights at rear
LED side marker lights, operated via indicator signal
LED license plate lights
1 x 15-pin connection cable
2 LED work lights, mounted left and right under the outer frame
2 LED reversing lights, mounted at the rear left and right
7-pin socket at the rear
Paintwork
Machine blasted, arc-galvanized, epoxy primer, coated with 2K topcoat using electrostatic process
Material doublings and transitions preserved with cavity wax
Chassis = RAL 9005 deep black
Load securing elements = RAL 1003 signal yellow
Drawbar/tow bar in driving pos...

Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.