Maināms šasijas piekabe

KRONE AZW 18 BDF Carrier Maxi Jumbo Zwillingsbereift

Krone AZW 18 zLT3B7 Container Trailer Jumbo BDF Swap Body Chassis ----> ---- 4 container locks on 20' basis / front stop for swap body 7.3 – adjustable for swap body 7

Perm. total weight: 18,000 kg

Weight: 2,890 kg

Payload: 15,110 kg

BPW Bergische axles

Air suspension

Disc brakes

2x LED work lights at the rear

LED tail lights

Side and rear underrun protection (right, left, and rear)

EBS

ABS

Wabco brake system

Air supply coupling head (red + yellow)

15-pin, 24 Volt connector

Lifting and lowering device, 2 valves, for 1st and 2nd axle

Long stroke

Steel air tank

Twistlock spacing L x W: 5,860 x 2,260 mm

Bridge stop at front

Rockinger towing eye, 40 mm

Lifting height: approx. 1,409 mm

Driving height: approx. 1,110 mm

Unladen ride height: approx. 1,045 mm

Lowered height: approx. 990 mm

Parking height: approx. 1,020 - 1,320 mm

External dimensions LxW: approx. 9,350 x 2,550 mm

Length without drawbar: approx. 7,200 mm

Wheelbase: 5,150 mm

1x right-hand side stow box (defective)

Spare wheel holder

Tyres: 245/70R19.5 twin tyres

Tread depth left front outside: 10 mm
Tread depth left front inside: 10 mm
Tread depth left rear outside: 9 mm
Tread depth left rear inside: 10 mm
Tread depth right front outside: 10 mm
Tread depth right front inside: 11 mm
Tread depth right rear outside: 8 mm
Tread depth right rear inside: 10 mm

Additional features:
Chassis:
Double-T longitudinal beams with welded crossmembers, neck height: 85 mm, 4 container locks on 20' basis
Removable tunnel centering per BDF specification
1 additional pair of guide rollers in center
Impact protection on main beam with large rubber buffers
Rear underrun protection per EU directive
Side protection per EU directive
Front stop for swap body 7.3 – adjustable for swap body 7
Chassis length designed for swap body 7, flush with rear (type code B)
For parking height 1,020 - 1,320 mm (type code 7)
Note: Parking height 1,020 mm only achievable on level ground
Unladen ride height approx.: 1,045 mm
Turntable/drawbar:
Turntable with ball race ring
Low-maintenance slewing ring
With 40 mm towing eye
Axles/assembly:
2 axles, each with 9,000 kg capacity
BPW axles, 19.5", air suspension (total stroke 430 mm) and disc brakes
Brake disc diameter: 370 mm
With lifting/lowering device, 2 valves
Tyres:
8 x 245/70R19.5
Without spare wheel
Spare wheel holder:
Basket type, in front of assembly on right
Mudguards:
Black plastic, two-part at front, half-shell type at rear with mud flaps
Spray protection per EU directive
Brakes:
Braking system per ECE Regulation 13 (incl. vehicle stabilisation function)
Spring-loaded parking brake
Note: Service brake of the front axle can be released for coupling by engaging the parking brake
Diagnosis via ISO7638 connector (EBS power cable)
Standard air connections ISO 1728 (palm couplings)
Hfedpfxoyklg Ae Adrjc
1 wheel chock with holder
Brake system: Wabco Premium
EBS system, 4S/3M, 4 sensors on two axles
Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS!
Lighting:
Lighting and signaling system per ECE 48
LED side marker lights with turn signal function
2 outline marker lights with rubber arm, LED version
24 Volt, front with 15-pin plug DIN ISO 1185
Plug ISO 37

Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.