Zema kravnes piekabe
MAX Trailer 600
Zema kravnes piekabe
MAX Trailer 600
Fiksēta cena plus PVN
58 600 €
(70 320 € bruto)
Stāvoklis
Jauns
Atrašanās vieta
Marz 

Pamatdati
Cena un atrašanās vieta
Fiksēta cena plus PVN
58 600 €
(70 320 € bruto)
- Pārdevēja atrašanās vieta:
- Bundesstr. 9, 7221 Marz, Austrija

Zvanīt
Tehniskā informācija
Izmēri un svars
Kopējais svars:
42 000 kg
Maksimālā kravnesība:
33 975 kg
Kopējais platums:
2 540 mm
Kopējais augstums:
860 mm
Asis un riteņi
Asu konfigurācija:
> 3 asis
Drošības funkcijas
ABS
Piedāvājuma informācija
- Sludinājuma ID:
- A213-65-417
- Atsauces numurs:
- MAX600-4A
- Atjaunināšana:
- pēdējo reizi 14.10.2026
Apraksts
MAX Low-Bed Trailer NEW – 9.3 m Loading Area | Ramps | Approx. 34 tons Payload | from €58,600
New vehicle – can be individually configured according to your area of application.
Robust low-bed trailer with a curved loading area and a powerful ramp system for the professional transport of construction machinery, vehicles, and heavy equipment.
Designed for high payload, long service life, and safe use on construction sites.
Lajdeypazlspfx Aqreh
Highlights:
* Approx. 33,975 kg payload
* Curved loading area with rear slope
* Hydraulic, adjustable steel ramps
* Ramp load up to 40,000 kg per pair
* Drawbar version with turntable
* High-strength steel construction
* BPW axles with air suspension
* EBS braking system
Technical data:
* Gross weight: 42,000 kg
* Unladen weight approx.: 8,025 kg (±3%)
* Payload approx.: 33,975 kg
* Loading area length: 9,300 mm
* Overall width: 2,540 mm
* Loading height at max. load: approx. 860 mm
* Axle track: 1,360 mm
* Speed: 80 km/h
Standard equipment:
* Curved loading area with approx. 48 mm hardwood floor
* Diamond plate covering over the axles
* Several lashing points up to LC 10,000 daN
* Galvanized, one-piece steel ramps (approx. 3,000 × 800 mm)
* Hydraulic ramp lifting system
* High-strength fine-grain steels S355 / S690
* BPW axles, air-suspended, drum brakes
* EBS braking system (2S/2M) with spiral cable
* LED lighting ASPÖCK NORDIK
Included options / equipment:
* Turntable with approx. 1,750 mm long drawbar and tow hitch Ø 50 mm
* Coupling height loaded approx. 630–810 mm
* Electro-hydraulic unit at the rear under the loading area
* Tire pressure monitoring system TPMS (ECE R141)
* Cover plates between ramps and loading area
* Control valves for ramps on the right side
* Galvanized supports under the loading area slope
* Rotating beacon bracket at the rear
* Extendable warning signs with LED
* Reflective tape according to EU regulations
* Additional license plate holder at the rear right
Further equipment and individual modifications are possible at any time – we configure your vehicle exactly according to your requirements.
Example photo. Equipment may vary depending on the configuration.
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
New vehicle – can be individually configured according to your area of application.
Robust low-bed trailer with a curved loading area and a powerful ramp system for the professional transport of construction machinery, vehicles, and heavy equipment.
Designed for high payload, long service life, and safe use on construction sites.
Lajdeypazlspfx Aqreh
Highlights:
* Approx. 33,975 kg payload
* Curved loading area with rear slope
* Hydraulic, adjustable steel ramps
* Ramp load up to 40,000 kg per pair
* Drawbar version with turntable
* High-strength steel construction
* BPW axles with air suspension
* EBS braking system
Technical data:
* Gross weight: 42,000 kg
* Unladen weight approx.: 8,025 kg (±3%)
* Payload approx.: 33,975 kg
* Loading area length: 9,300 mm
* Overall width: 2,540 mm
* Loading height at max. load: approx. 860 mm
* Axle track: 1,360 mm
* Speed: 80 km/h
Standard equipment:
* Curved loading area with approx. 48 mm hardwood floor
* Diamond plate covering over the axles
* Several lashing points up to LC 10,000 daN
* Galvanized, one-piece steel ramps (approx. 3,000 × 800 mm)
* Hydraulic ramp lifting system
* High-strength fine-grain steels S355 / S690
* BPW axles, air-suspended, drum brakes
* EBS braking system (2S/2M) with spiral cable
* LED lighting ASPÖCK NORDIK
Included options / equipment:
* Turntable with approx. 1,750 mm long drawbar and tow hitch Ø 50 mm
* Coupling height loaded approx. 630–810 mm
* Electro-hydraulic unit at the rear under the loading area
* Tire pressure monitoring system TPMS (ECE R141)
* Cover plates between ramps and loading area
* Control valves for ramps on the right side
* Galvanized supports under the loading area slope
* Rotating beacon bracket at the rear
* Extendable warning signs with LED
* Reflective tape according to EU regulations
* Additional license plate holder at the rear right
Further equipment and individual modifications are possible at any time – we configure your vehicle exactly according to your requirements.
Example photo. Equipment may vary depending on the configuration.
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2015
49 Sludinājumi tiešsaistē
Nosūtīt pieprasījumu
Tālrunis & Fakss
+43 2626 ... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Veiksmīgs
Jūsu ziņojums ir nosūtīts.
Mazā sludinājuma
Marz
1 160 km
Zema kravnes piekabe
MAX Trailer 600
MAX Trailer 600
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda


















