Zema kravnes piekabe
MAX TRAILER 300
Zema kravnes piekabe
MAX TRAILER 300
fiksēta cena bez PVN
38 600 €
(46 320 € bruto)
Stāvoklis
Jauns
Atrašanās vieta
Marz 

Rādīt attēlus
Rādīt karti
Pamatdati
Cena un atrašanās vieta
fiksēta cena bez PVN
38 600 €
(46 320 € bruto)
- Pārdevēja atrašanās vieta:
- Bundesstr. 9, 7221 Marz, Austrija

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 16 390 kg
- Kopējais svars:
- 21 000 kg
- Asu konfigurācija:
- 2 asis
- Kopējais platums:
- 2 480 mm
- Kopējais augstums:
- 860 mm
- Aprīkojums:
- ABS
Piedāvājuma informācija
- Ieraksta ID:
- A213-65-452
- Atsauces Nr.:
- MAX300-2A
- Pēdējoreiz atjaunots:
- 03.3.2461103
Apraksts
MAX Trailer 300 NEW | 7.0 m Load Area | 16.4 t Payload | Ramps | from €38,600
New vehicle – individually configurable to your application.
Compact and robust low-loader trailer for the safe transport of machinery, equipment, and vehicles.
Designed for high payload, easy handling, and cost-effective use in daily operations.
Highlights
• Approx. 16,390 kg payload
• 7,000 mm load area length
• Rear bevel for easy driving on
• Manually adjustable aluminum ramps
• Ramp load capacity up to 24,000 kg per pair
• BPW axles with air suspension
• EBS braking system
• Compact dimensions – ideal for construction sites & service operations
Technical Data
• Gross weight: 21,000 kg
• Unladen weight approx.: 4,610 kg (±3%)
• Payload approx.: 16,390 kg
• Load area length: 7,000 mm
• Overall width: 2,480 mm
• Loading height at max. load: approx. 860 mm
• Coupling heights: 700 / 775 / 850 mm
• Max. speed: 80 km/h
Standard Equipment
• Hardwood loading floor (approx. 38 mm)
• Tread plate covering over axles
• Lashing points up to LC 5,000 daN and flush-mounted lashing rings in the frame
• Cut-outs in the outer frame for tie-down straps
• BPW axles, air-suspended, drum brake with lift/lower function
• EBS braking system (2S/2M) with spiral cable
• LED lighting ASPÖCK NORDIK
Bcsdoypa Apopfx Admow
• Tire pressure monitoring system TPMS (ECE R141)
Included options / accessories
• Drawbar approx. 1,750 mm with Ø 50 mm towing eye
• Galvanized steel front wall approx. 400 mm
• Spare wheel with holder on drawbar
• Mechanical support leg at front
• Galvanized folding supports under the rear slope
• European rear reflective plates
• White reflective tape on sides and rear
• Rotating beacon holder at rear
• Holders for warning signs including socket
• Mud flaps with MAX logo
• Additional license plate holder rear right
• Manual & documentation on USB stick
Further equipment and individual customization available at any time – we configure your vehicle exactly to your requirements.
Sample photo. Actual equipment may vary depending on configuration.
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
New vehicle – individually configurable to your application.
Compact and robust low-loader trailer for the safe transport of machinery, equipment, and vehicles.
Designed for high payload, easy handling, and cost-effective use in daily operations.
Highlights
• Approx. 16,390 kg payload
• 7,000 mm load area length
• Rear bevel for easy driving on
• Manually adjustable aluminum ramps
• Ramp load capacity up to 24,000 kg per pair
• BPW axles with air suspension
• EBS braking system
• Compact dimensions – ideal for construction sites & service operations
Technical Data
• Gross weight: 21,000 kg
• Unladen weight approx.: 4,610 kg (±3%)
• Payload approx.: 16,390 kg
• Load area length: 7,000 mm
• Overall width: 2,480 mm
• Loading height at max. load: approx. 860 mm
• Coupling heights: 700 / 775 / 850 mm
• Max. speed: 80 km/h
Standard Equipment
• Hardwood loading floor (approx. 38 mm)
• Tread plate covering over axles
• Lashing points up to LC 5,000 daN and flush-mounted lashing rings in the frame
• Cut-outs in the outer frame for tie-down straps
• BPW axles, air-suspended, drum brake with lift/lower function
• EBS braking system (2S/2M) with spiral cable
• LED lighting ASPÖCK NORDIK
Bcsdoypa Apopfx Admow
• Tire pressure monitoring system TPMS (ECE R141)
Included options / accessories
• Drawbar approx. 1,750 mm with Ø 50 mm towing eye
• Galvanized steel front wall approx. 400 mm
• Spare wheel with holder on drawbar
• Mechanical support leg at front
• Galvanized folding supports under the rear slope
• European rear reflective plates
• White reflective tape on sides and rear
• Rotating beacon holder at rear
• Holders for warning signs including socket
• Mud flaps with MAX logo
• Additional license plate holder rear right
• Manual & documentation on USB stick
Further equipment and individual customization available at any time – we configure your vehicle exactly to your requirements.
Sample photo. Actual equipment may vary depending on configuration.
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Iesniegt pieprasījumu
Tālrunis & Fakss
+43 5338 ... sludinājumi
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda








