Piekabe ar darba platformuMÜLLER-MITTELTAL
ETÜ-TA-R 21 Tieflader 7m, luftgefedert, LED
Piekabe ar darba platformu
MÜLLER-MITTELTAL
ETÜ-TA-R 21 Tieflader 7m, luftgefedert, LED
fiksēta cena bez PVN
33 900 €
(40 341 € bruto)
Izgatavošanas gads
2026
Stāvoklis
Jauns
Atrašanās vieta
Alsdorf 

Rādīt attēlus
Rādīt karti
Pamatdati
- Apzīmējums:
- Piekabe ar darba platformu
- Ražotājs:
- MÜLLER-MITTELTAL
- Izgatavošanas gads:
- 2026
- Stāvoklis:
- jauns
Cena un atrašanās vieta
fiksēta cena bez PVN
33 900 €
(40 341 € bruto)
- Pārdevēja atrašanās vieta:
- Carl - Zeiss - Straße 26, 52477 Alsdorf, Vācija

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 16 500 kg
- Kopējais svars:
- 21 000 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 7 000 mm
- Iekraušanas vietas platums:
- 2 470 mm
- Aprīkojums:
- ABS, paceļamais aizmugurējais borts
Piedāvājuma informācija
- Ieraksta ID:
- A214-00-892
- Atsauces Nr.:
- 27963
- Pēdējoreiz atjaunots:
- 04.3.2461104
Apraksts
Müller-Mitteltal ETÜ-TAR 21 Tandem - Low Loader / Platform Trailer, Drivable Over
Reference No. for inquiries: 27963
NEW VEHICLE incl. COC certificate
* Gross weight: 21t, payload: 16.50t, galvanized chassis
* Available end of March 2026
* Platform version with 400mm high front wall, ramp locking with ramp support rods and angled reinforcement
* 21t gross weight version. Reinforced frame and axle, axle spacing 1,810 mm
* Deck height approx. 910 mm loaded / approx. 940 mm unloaded
Blodpfx Abeyqdl Rousd
* 7,000 mm load area, 400 mm high front wall
* Extended ramps: 3,000 mm, hot-dip galvanized, single piece with galvanized grating
* Ramp hoist with vertically standing, adjustable springs for easy single-person operation
* Load securing package:
* 4 UVV lock-down lashing brackets (LC 8,000 daN) mounted to existing hole pattern in 45° outer frame, positioned approx. 1m from front/rear cross member
* 10 UVV lashing brackets LC 3000 daN, retractable into the existing raster in the outer frame
* 2 UVV lashing rings each, at the front and rear cross members, recessed, LC 10,000 daN
* Additional lashing points via Ø50 mm holes (LC 1,200 daN) in front and end cross members
* Prepared for retrofitting container locks
* 50 mm thick softwood floor
* Gigant axles with air suspension incl. EBS 2S/2M, lift/lower function
* 235/75R 17.5 (8 units), twin tires, tire pressure monitoring sensors
* 1 plastic toolbox mounted in front of the front wall on the right-hand side
* LED lighting system
* 7-pin socket at the rear, prepared for extended length lighting with rear lights (58 R) and ground
* 2 LED reversing lights at the rear
* Flashing side marker lights
* Oversize warning panel
* 1 detachable LED beacon incl. holder and installation
* Folding supports at the rear, front support foot with gearbox winch
----
Example hire-purchase offer from our partner MMV Leasing: €655/month net, 60 months term, no down payment, zero euro residual
Other terms available, with/without down payment/residual value!
We are MüllerMitteltal authorized dealer
----
* Our opening hours
* Monday - Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
* Outside business hours by appointment
* wir sprechen deutsch, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle francais
* Leasing, financing, trade-in possible
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Reference No. for inquiries: 27963
NEW VEHICLE incl. COC certificate
* Gross weight: 21t, payload: 16.50t, galvanized chassis
* Available end of March 2026
* Platform version with 400mm high front wall, ramp locking with ramp support rods and angled reinforcement
* 21t gross weight version. Reinforced frame and axle, axle spacing 1,810 mm
* Deck height approx. 910 mm loaded / approx. 940 mm unloaded
Blodpfx Abeyqdl Rousd
* 7,000 mm load area, 400 mm high front wall
* Extended ramps: 3,000 mm, hot-dip galvanized, single piece with galvanized grating
* Ramp hoist with vertically standing, adjustable springs for easy single-person operation
* Load securing package:
* 4 UVV lock-down lashing brackets (LC 8,000 daN) mounted to existing hole pattern in 45° outer frame, positioned approx. 1m from front/rear cross member
* 10 UVV lashing brackets LC 3000 daN, retractable into the existing raster in the outer frame
* 2 UVV lashing rings each, at the front and rear cross members, recessed, LC 10,000 daN
* Additional lashing points via Ø50 mm holes (LC 1,200 daN) in front and end cross members
* Prepared for retrofitting container locks
* 50 mm thick softwood floor
* Gigant axles with air suspension incl. EBS 2S/2M, lift/lower function
* 235/75R 17.5 (8 units), twin tires, tire pressure monitoring sensors
* 1 plastic toolbox mounted in front of the front wall on the right-hand side
* LED lighting system
* 7-pin socket at the rear, prepared for extended length lighting with rear lights (58 R) and ground
* 2 LED reversing lights at the rear
* Flashing side marker lights
* Oversize warning panel
* 1 detachable LED beacon incl. holder and installation
* Folding supports at the rear, front support foot with gearbox winch
----
Example hire-purchase offer from our partner MMV Leasing: €655/month net, 60 months term, no down payment, zero euro residual
Other terms available, with/without down payment/residual value!
We are MüllerMitteltal authorized dealer
----
* Our opening hours
* Monday - Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
* Outside business hours by appointment
* wir sprechen deutsch, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle francais
* Leasing, financing, trade-in possible
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 2404 ... sludinājumi
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda




























