Piekabe ar darba platformuMÜLLER-MITTELTAL
ETÜ-TA-R 21 Tieflader 7m, luftgefedert, LED
Piekabe ar darba platformu
MÜLLER-MITTELTAL
ETÜ-TA-R 21 Tieflader 7m, luftgefedert, LED
Fiksēta cena plus PVN
33 900 €
(40 341 € bruto)
Ražošanas gads
2026
Stāvoklis
Jauns
Atrašanās vieta
Alsdorf 

Rādīt attēlus
Rādīt karti
Pamatdati
Cena un atrašanās vieta
Fiksēta cena plus PVN
33 900 €
(40 341 € bruto)
- Pārdevēja atrašanās vieta:
- Carl - Zeiss - Straße 26, 52477 Alsdorf, Vācija

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 16 500 kg
- Kopējais svars:
- 21 000 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 7 000 mm
- Iekraušanas vietas platums:
- 2 470 mm
- Aprīkojums:
- ABS, paceļamais aizmugurējais borts
Piedāvājuma informācija
- Sludinājuma ID:
- A215-48-223
- Atsauces numurs:
- 11630
- Atjaunināšana:
- pēdējo reizi 20.03.2026
Apraksts
Müller-Mitteltal ETÜ-TAR 21 Tandem - Low-loader | Drive-over Platform Trailer
Ref. for inquiries: 11630 Vehicle available immediately from Alsdorf warehouse
NEW VEHICLE incl. COC (Certificate of Conformity)
* Gross weight: 21t, Payload: 16.5t, galvanized chassis
* Available end of March 2026
* Platform version with 400mm high front wall, ramp locking via ramp holding rods and inclined support
* Version GG 21t, reinforced frame and axle with axle spacing 1,810 mm
* Deck height approx. 910 mm loaded / approx. 940 mm unloaded
* 7m loading area with 400mm high front wall
* Extended ramps: 3m one-piece, hot-dip galvanized ramps with hot-dip galvanized grating
* Ramp lifters with vertically mounted adjustable springs for easy single-person operation
* Load securing package:
* 4 UVV drop-down lashing brackets (LC 8,000 daN), mounted in existing hole pattern on the 45° outer frame, positioned approx. 1m from front/rear cross member
* 10 UVV retractable lashing brackets (LC 3,000 daN) recessed in the existing hole grid of the outer frame
Isdpfx Ahoyvxg Ujxetd
* 2 UVV lashing rings front & rear recessed in the cross member, each with LC 10,000 daN
* Additional lashing options via holes (Ø 50mm, LC 1,200 daN) in the front and end cross beam
* Preparation for retrofitting container locks (container locks available at extra charge)
* Softwood floor, 50mm thick
* Air suspension, Gigant axles incl. EBS 2S/2M, raising and lowering
* Tyres: 235/75R 17.5 (8 twin tires) with tire pressure monitoring sensor
* Plastic toolbox in front of the front wall, right side in direction of travel
* LED lighting system
* 7-pin socket at the rear, pre-wired for overlength lighting with tail light (58 R) and ground
* 2 LED reverse lights at the rear
* Flashing side marker lights
* Oversize warning panel
* 1 removable LED beacon incl. holder and installation
* Drop-down supports at the rear, front support foot with geared winch
----
Hire-purchase example from our partner MMV Leasing: €655/month (net) for 60 months, no down payment, and €0 final installment
Other terms available with/without down payment or residual value.
We are an official Müller-Mitteltal dealer
----
* Our business hours:
* Monday to Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
* Outside opening hours by appointment
We speak German, English, Russian, Polish, and French
* WhatsApp
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Ref. for inquiries: 11630 Vehicle available immediately from Alsdorf warehouse
NEW VEHICLE incl. COC (Certificate of Conformity)
* Gross weight: 21t, Payload: 16.5t, galvanized chassis
* Available end of March 2026
* Platform version with 400mm high front wall, ramp locking via ramp holding rods and inclined support
* Version GG 21t, reinforced frame and axle with axle spacing 1,810 mm
* Deck height approx. 910 mm loaded / approx. 940 mm unloaded
* 7m loading area with 400mm high front wall
* Extended ramps: 3m one-piece, hot-dip galvanized ramps with hot-dip galvanized grating
* Ramp lifters with vertically mounted adjustable springs for easy single-person operation
* Load securing package:
* 4 UVV drop-down lashing brackets (LC 8,000 daN), mounted in existing hole pattern on the 45° outer frame, positioned approx. 1m from front/rear cross member
* 10 UVV retractable lashing brackets (LC 3,000 daN) recessed in the existing hole grid of the outer frame
Isdpfx Ahoyvxg Ujxetd
* 2 UVV lashing rings front & rear recessed in the cross member, each with LC 10,000 daN
* Additional lashing options via holes (Ø 50mm, LC 1,200 daN) in the front and end cross beam
* Preparation for retrofitting container locks (container locks available at extra charge)
* Softwood floor, 50mm thick
* Air suspension, Gigant axles incl. EBS 2S/2M, raising and lowering
* Tyres: 235/75R 17.5 (8 twin tires) with tire pressure monitoring sensor
* Plastic toolbox in front of the front wall, right side in direction of travel
* LED lighting system
* 7-pin socket at the rear, pre-wired for overlength lighting with tail light (58 R) and ground
* 2 LED reverse lights at the rear
* Flashing side marker lights
* Oversize warning panel
* 1 removable LED beacon incl. holder and installation
* Drop-down supports at the rear, front support foot with geared winch
----
Hire-purchase example from our partner MMV Leasing: €655/month (net) for 60 months, no down payment, and €0 final installment
Other terms available with/without down payment or residual value.
We are an official Müller-Mitteltal dealer
----
* Our business hours:
* Monday to Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
* Outside opening hours by appointment
We speak German, English, Russian, Polish, and French
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
24 Sludinājumi tiešsaistē
Nosūtīt pieprasījumu
Tālrunis & Fakss
+49 2404 ... sludinājumi
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda




























